Default Midi Configuration (#CCs on AxeFX)

H

hole

Inspired
Guys,

Does the Axe have a default assignment of #CCs or does one need to assign the #CCs individually for each effect (I know you can assign any CC to any effect, I just want to know if it comes pre-loaded with some kind of standard configuration)

(I'll give an example of what i mean, because the above doen't seem to make much sense.
When I first turn it on, will there be CC's assigned for delay, pitch shift , chorus etc etc)

If so, is there a list available with these default mappings?


Pfft, I hope my question is clear...
 
At some point the firmware began including a default CC set. They don't overwrite existing settings during the update but can be recalled (among other things) by running the "reset system parameters" command afterward. I assume new units since then ship with those assignments. List for Ultra originally provided by srooijens here: viewtopic.php?p=142187#p142187 I'm not sure if the standard Axe-FX defaults differ or if it's just these with the CCs/blocks it doesn't have omitted.

010 Input Volume
011 Out 1 Volume
012 Out 2 Volume
013 Bypass
014 Tempo Tap
015 Tuner
016 External 1
017 External 2
018 External 3
019 External 4
020 External 5
021 External 6
022 External 7
023 External 8
024 Looper 1 Rec
025 Looper 1 Play
026 Looper 1 Once
027 Looper 1 Stack
028 Looper 1 Rev
029 Looper 2 Rec
030 Looper 2 Play
031 Looper 2 Once
032 Looper 2 Stack
033 Looper 2 Rev
034 Global Bypass
035 Volume Incr
036 Volume Decr
037 Amp 1 bypass
038 Amp 2 bypass
039 Cabinet 1 bypass
040 Cabinet 2 bypass
041 Chorus 1 bypass
042 Chorus 2 bypass
043 Compressor 1 bypass
044 Compressor 2 bypass
045 Crossover 1 bypass
046 Crossover 2 bypass
047 Delay 1 bypass
048 Delay 2 bypass
049 Drive 1 bypass
050 Drive 2 bypass
051 Enhancer bypass
052 Filter 1 bypass
053 Filter 2 bypass
054 Filter 3 bypass
055 Filter 4 bypass
056 Flanger 1 bypass
057 Flanger 2 bypass
058 Formant bypass
059 FX loop bypass
060 Gate 1 bypass
061 Gate 2 bypass
062 GEQ 1 bypass
063 GEQ 2 bypass
064 GEQ 3 bypass
065 GEQ 4 bypass
066 Megatap 1 bypass
067 MultiComp 1 bypass
068 MultiComp 2 bypass
069 MultiDelay 1 bypass
070 MultiDelay 2 bypass
071 PEQ 1 bypass
072 PEQ 2 bypass
073 PEQ 3 bypass
074 PEQ 4 bypass
075 Phaser 1 bypass
076 Phaser 2 bypass
077 Pitch 1 bypass
078 Pitch 2 bypass
079 QuadChorus 1 bypass
080 QuadChorus 2 bypass
081 Resonator 1 bypass
082 Resonator 2 bypass
083 Reverb 1 bypass
084 Reverb 2 bypass
085 Ringmod bypass
086 Rotary 1 bypass
087 Rotary 2 bypass
088 Synth 1 bypass
089 Synth 2 bypass
090 Tremolo 1 bypass
091 Tremolo 2 bypass
092 Vocoder bypass
093 Volume 1 bypass
094 Volume 2 bypass
095 Volume 3 bypass
096 Volume 4 bypass
097 WahWah 1 bypass
098 WahWah 2 bypass
 
I'd strongly recommend you avoid CC number 32, even though the AxeFX lets you use it. This is a MIDI standard for Bank LSB, so if you ever connect any other MIDI gear, patch changes will be unpredicatable. Use any of the other 126 available CC numbers. The AxeFX uses CC number 0 for Bank MSB (responds to banks 0, 1 and 2), so it prevents you using CC0 as a controller.
 
You must log in or register to reply here.
Back
Top Bottom