1. We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.
    Dismiss Notice

Controlling Axe and Whammy help - Can certain PC be ignored?

Discussion in 'Axe-Fx II Discussion' started by soundroi, Nov 7, 2018.

  1. soundroi

    soundroi
    Expand Collapse
    New here

    Joined:
    Sep 28, 2018
    Messages:
    15
    Likes Received:
    6
    Hi! Any suggestion on how to control a Whammy Pedal with FCB1010 into Axe FX II? I obviously can make whammy active or bypassed (PC 1 and 22) and use controller 11 to move the pedal but... how can this be achieved not interfering with the Axe? I was thinking that two program changes can be sent simultaneously with the FCB, one for preset or scene in the Axe, and the other to control the whammy... but how to make the Axe FX II ignore certain PC? Is it possible? Are there other ways of doing this? Thanks in advance.
    Roi.
     
  2. chris

    chris
    Expand Collapse
    Moderator
    Moderator

    Joined:
    Jul 31, 2008
    Messages:
    22,546
    Likes Received:
    14,166
    a real whammy pedal?
     
  3. soundroi

    soundroi
    Expand Collapse
    New here

    Joined:
    Sep 28, 2018
    Messages:
    15
    Likes Received:
    6
    Yes!
     
  4. yek

    yek
    Expand Collapse
    Moderator
    Moderator

    Joined:
    Sep 30, 2009
    Messages:
    19,644
    Likes Received:
    22,135
    Location:
    The Netherlands
    The usual way to control two separate devices with MIDI, is to use different MIDI channels. The Axe-Fx defaults to MIDI channel 1. Maybe the Whammy can be conrolled through another MIDI channel. You would then have to configure the FCB to send messages through two MIDI channels, I don't know if the FCB can handle that.
     

Share This Page