• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Connection Questions , AxeIII to UA interface and CLR

csgband

Inspired
So I have my AxeFxIII connected to my UA interface.
I also have it connected to my CLR.
I want to set it up so I have stern to my UA and summed L&R to my CLR.
Here is how I have it set up. I can't figure ho to get the sound to go to ouput 3
Thanks for any help, Chris
 

Attachments

  • Screen Shot 2021-02-26 at 2.15.21 PM.png
    Screen Shot 2021-02-26 at 2.15.21 PM.png
    577.7 KB · Views: 6
  • IMG_0551.jpeg
    IMG_0551.jpeg
    76.4 KB · Views: 6

chris

Legend!
First, you don’t have any cable plugged into Output 3 on the rear.

Also, you have Out 3 Block set to -27db. Turn it up back to 0. Also make sure the Out 3 physical knob is turned up on the front panel.

There is also a connector missing in your Out 3 row, so sound would not get to the Out 3 block.
 

csgband

Inspired
First, you don’t have any cable plugged into Output 3 on the rear.

Also, you have Out 3 Block set to -27db. Turn it up back to 0. Also make sure the Out 3 physical knob is turned up on the front panel.

There is also a connector missing in your Out 3 row, so sound would not get to the Out 3 block.
Thanks, I feel like a big dummy. All good now.
 
Top Bottom