sprint
Axe-Master
I'm not attaching a preset as it seems easy to reproduce: CAUTION - turn your monitoring waay down when testing this:
- Now turn the rate knob all the way down (or to a very low value) and then back up a little (you might need to do this a couple of times - I had it on an expression pedal which is how I kept running into it).
On my unit, doing this results in output 1 going to max with a high pitched signal and the unit locks up in this state. This may be considered a result of extreme settings but given the nasty reaction the unit has to it, it might be good to block somehow).
- Create a simple patch with INPUT1>CHORUS1>OUTPUT1
- Select "Stereo Tri Chorus" with the following settings change:
- Right Depth 100%
- Centre Depth 25%
- Delay Time 0.1 (minimum)
- Now turn the rate knob all the way down (or to a very low value) and then back up a little (you might need to do this a couple of times - I had it on an expression pedal which is how I kept running into it).
On my unit, doing this results in output 1 going to max with a high pitched signal and the unit locks up in this state. This may be considered a result of extreme settings but given the nasty reaction the unit has to it, it might be good to block somehow).