Behringher fcb1010 : can't program expression pedal A

danielworks

Inspired
I followed carefully this tutorial but I am only getting to make it work the pedal B.
When I press "Learn" on FX3 midi/remote menu, only pedal B is assigned ti CC#14. My pedal A is working, cause it can be checked while calibrating them.
What am I doing wrong ?
 
the fcb1010 saves the expression pedal cc numbers for each preset so you need to have the preset you want to use selected and then enter edit mode and do what the video says. also make sure there is no conflict with the selected cc and if it is used by something else on the axe fx try selecting a different one from the fcb
 
the fcb1010 saves the expression pedal cc numbers for each preset so you need to have the preset you want to use selected and then enter edit mode and do what the video says. also make sure there is no conflict with the selected cc and if it is used by something else on the axe fx try selecting a different one from the fcb
I did it, i think there was a conflict with old settings since I bought it used yesterday.
Problem solved after resetting FCB and Axe fx, thanks !
 
Back
Top Bottom