Walt's Frozen Head
Member
2U Eventides have this feature. You can save a group of modules as a "supermodule" and use it later wherever you want to.
I think it would be useful.
I think it would be useful.
That would work as a separate feature but you would also need some sort of Macro layer so you can assign a knob to multiple parameters.
The concept of out Blocks has already realized your wishWishes I haven't seen yet: capability of routing the looper to it's own output would be huge as I could then send the loop to the drummers monitor. also naming global blocks
A Synth block like the EHX B9/C9/Synth pedals...
A Synth block like the EHX B9/C9/Synth pedals...
A Synth block like the EHX B9/C9/Synth pedals...
+1Brickwall limiter, would be a total gamechanger
Those are such specific effects, I wouldn't count on them seeing added as models.
I'll probably add my Mel9 to my rack, in one of the effects send/return loops of the III.
I'm getting best results with the Mel9 in the loop by feeding the Mel9 a direct signal from the input (separate row, not going through the AMP block), with a Comp block in front of it. The Mel9 is set to 100% wet. This avoids the problem with dirty amp tones (which won't work with the Mel9). The compressor improves the tracking and makes the level more consistent.
I agree they're pretty specific, but hey this *is* the wish list ;-) In my current band I could use at least 3 of them for synth, an organ, and an electric piano or clavinet. If EHX came out w/ one pedal that covered all of the ranges I'd probably get it but carrying 3 or 4 pedals doesn't interest me. I love how compact my AX8 rig is!I would love that to avoid using a loop with pedals.
I've got the C9 and it needs pre and post comp to "tame" it lol. How cool would that be to have an organ block in the box. Very useful.
Looks totally possible already...Wishes I haven't seen yet: capability of routing the looper to it's own output would be huge as I could then send the loop to the drummers monitor. also naming global blocks
Yup, sometimes I’m a dumba$$Looks totally possible already...
We need way more than 8 scenes.
I find the following a bit tedious with the II and it would be great if this is changed with the III:
When adjusting unity gain on Axe Edit on various blocks (comp, drive, amp, multiband comp, for example) and you go to the meter I mentioned above - every time you click on a different block in AxeEdit, the meter disappears and you have to hit the Utility button again. It sounds trivial, but if you're doing this for 30 presets and your unit is just out of reach and you have a guitar in your lap, it gets annoying, interferes with your flow and adds time.
That is turning our to be a very handy feature.When you are in the Layout menu and you press Zoom it brings up VU meters above the grid. You can adjust the level of each block right from that page.