Axe-Fx III Firmware Release Version 19.01

Diego said:
Work perfectly, the Blackglass is amazing
Click to expand...
Yes it works but I never really got the hype about this pedal . The day I try them all for real I was disappointed . They are very pricey for what it is . The dist is light in the end. The ebs multidrive kick more ass to me .
 
My name is mud said:
ok so the B7K works better without any amp or cab .
warning to your preset (bass) guys , my speaker were about to explode first . the level is wayyyyyy up now :)
Click to expand...
This B7K is interesting!
I only tried it with a speaker!
Sounds good!
I wonder what the experts will get out of this ?!
 
My name is mud said:
Yes it works but I never really got the hype about this pedal . The day I try them all for real I was disappointed . They are very pricey for what it is . The dist is light in the end. The ebs multidrive kick more ass to me .
Click to expand...
I like for the bass exactly as I did with the real one, but it’s just my opinion. 😉
 
Thanks a bunch Cliff!
Pauly
FractalAudio said:
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/19p0/axefxiii_dsp_rel_19p01.zip

If you are using the beta you should upgrade because there was a bug in the Drive block for certain models (i.e. Plus Distortion).

Axe-Fx III Firmware Release Notes​


19.01

Added Damping control to Modifiers. The default, EXPONENTIAL, is the classic damping style where the modifier value has an exponential attack/decay. LINEAR selects a linear attack/decay.

Added Type control to ADSRs. The default, EXPONENTIAL, is an analog style where the ADSR has an exponential attack/decay. LINEAR selects a linear attack/decay.

Improved Phase Inverter Bias Excursion accuracy for some amp models (mostly non-MV types). Note: The improved PI Bias Excursion accuracy results in an increase in bias excursion in most cases. Bias excursion primarily manifests as intermodulation distortion, particularly subharmonic distortion. This produces a chunkier tone with more growl and also yields a thicker tone when rolling off the volume or playing lightly. The amount of bias excursion can be adjusted using the PI Bias Excursion control in the Advanced menu.

Renamed Timothy and Suhr Riot Drive models to clarify switch position.

Added Hi Mid control to Drive block.

Fixed Blackglass 7K model as reference pedal was defective. Added “Grunt” and “Attack” knobs to GUI (Grunt switch on pedal is a selectable low cut so knob duplicates Low Cut control).

Changed response of Horizon Precision Drive “Attack” control to match pedal (was reversed previously). Any presets using this model should be adjusted accordingly.

Improved accuracy of “G-taper” used for tone control in some Drive models, i.e., T808, VS9, Super OD, etc. Impact on existing presets is likely negligible but any presets using Tube Screamer models and their variants should be auditioned.

Fixed selecting Gibtone Scout tone stack causes NaN in certain amp models.

Fixed Amp block headroom meter monitoring wrong circuit node.

Fixed GUI not being redrawn when switching between a knob menu and a list menu.

Various other fixes and improvements.
Click to expand...
 
FractalAudio said:
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/19p0/axefxiii_dsp_rel_19p01.zip

If you are using the beta you should upgrade because there was a bug in the Drive block for certain models (i.e. Plus Distortion).

Axe-Fx III Firmware Release Notes​


19.01

Added Damping control to Modifiers. The default, EXPONENTIAL, is the classic damping style where the modifier value has an exponential attack/decay. LINEAR selects a linear attack/decay.

Added Type control to ADSRs. The default, EXPONENTIAL, is an analog style where the ADSR has an exponential attack/decay. LINEAR selects a linear attack/decay.

Improved Phase Inverter Bias Excursion accuracy for some amp models (mostly non-MV types). Note: The improved PI Bias Excursion accuracy results in an increase in bias excursion in most cases. Bias excursion primarily manifests as intermodulation distortion, particularly subharmonic distortion. This produces a chunkier tone with more growl and also yields a thicker tone when rolling off the volume or playing lightly. The amount of bias excursion can be adjusted using the PI Bias Excursion control in the Advanced menu.

Renamed Timothy and Suhr Riot Drive models to clarify switch position.

Added Hi Mid control to Drive block.

Fixed Blackglass 7K model as reference pedal was defective. Added “Grunt” and “Attack” knobs to GUI (Grunt switch on pedal is a selectable low cut so knob duplicates Low Cut control).

Changed response of Horizon Precision Drive “Attack” control to match pedal (was reversed previously). Any presets using this model should be adjusted accordingly.

Improved accuracy of “G-taper” used for tone control in some Drive models, i.e., T808, VS9, Super OD, etc. Impact on existing presets is likely negligible but any presets using Tube Screamer models and their variants should be auditioned.

Fixed selecting Gibtone Scout tone stack causes NaN in certain amp models.

Fixed Amp block headroom meter monitoring wrong circuit node.

Fixed GUI not being redrawn when switching between a knob menu and a list menu.

Various other fixes and improvements.
Click to expand...
Thanks for that😎👍
 
FractalAudio said:
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/19p0/axefxiii_dsp_rel_19p01.zip

If you are using the beta you should upgrade because there was a bug in the Drive block for certain models (i.e. Plus Distortion).

Axe-Fx III Firmware Release Notes​


19.01

Added Damping control to Modifiers. The default, EXPONENTIAL, is the classic damping style where the modifier value has an exponential attack/decay. LINEAR selects a linear attack/decay.

Added Type control to ADSRs. The default, EXPONENTIAL, is an analog style where the ADSR has an exponential attack/decay. LINEAR selects a linear attack/decay.

Improved Phase Inverter Bias Excursion accuracy for some amp models (mostly non-MV types). Note: The improved PI Bias Excursion accuracy results in an increase in bias excursion in most cases. Bias excursion primarily manifests as intermodulation distortion, particularly subharmonic distortion. This produces a chunkier tone with more growl and also yields a thicker tone when rolling off the volume or playing lightly. The amount of bias excursion can be adjusted using the PI Bias Excursion control in the Advanced menu.

Renamed Timothy and Suhr Riot Drive models to clarify switch position.

Added Hi Mid control to Drive block.

Fixed Blackglass 7K model as reference pedal was defective. Added “Grunt” and “Attack” knobs to GUI (Grunt switch on pedal is a selectable low cut so knob duplicates Low Cut control).

Changed response of Horizon Precision Drive “Attack” control to match pedal (was reversed previously). Any presets using this model should be adjusted accordingly.

Improved accuracy of “G-taper” used for tone control in some Drive models, i.e., T808, VS9, Super OD, etc. Impact on existing presets is likely negligible but any presets using Tube Screamer models and their variants should be auditioned.

Fixed selecting Gibtone Scout tone stack causes NaN in certain amp models.

Fixed Amp block headroom meter monitoring wrong circuit node.

Fixed GUI not being redrawn when switching between a knob menu and a list menu.

Various other fixes and improvements.
Click to expand...
Thanks Cliff & FAS!
 
I've been using the USA Lead Bright model a lot lately for some upcoming gigs and noticed in the jump from firmware 19.0 to 19.1 the master volume needs to be set much higher to start maxing the headroom meter.

To get a consistant signal into the amp for a test I put white noise from the synth block through the amp block.

To reach -0.0db on 19.0 master volume is set at 4.9. On 19.1 it needs to be raised to 6.9.

@FractalAudio I just wanted to check this was to do with the fixed headroom meter monitoring the wrong circuit node previously?
 
Liam Thompson said:
I've been using the USA Lead Bright model a lot lately for some upcoming gigs and noticed in the jump from firmware 19.0 to 19.1 the master volume needs to be set much higher to start maxing the headroom meter.

To get a consistant signal into the amp for a test I put white noise from the synth block through the amp block.

To reach -0.0db on 19.0 master volume is set at 4.9. On 19.1 it needs to be raised to 6.9.

@FractalAudio I just wanted to check this was to do with the fixed headroom meter monitoring the wrong circuit node previously?
Click to expand...
Yes.
 
Cliff, on both ODS Ford PAB models, the headroom meter is registering signal even with the MV on 0 & quickly jumps up to near 0db when the MV gets above about 1.5. Is this correct or is it related to the headroom display bug? This is on the Axe front panel & Axe Edit.
 
You must log in or register to reply here.
Back
Top Bottom