Axe-Fx III Firmware 22.00 Public Beta #4 (Beta 10)

Status
Not open for further replies.

FractalAudio

Administrator
Fractal Audio Systems
Moderator
https://www.fractalaudio.com/downlo...e-fx-3/22p0/axefxiii_dsp_rel_22p00_beta10.zip


WARNING!!! Dyna-Cab data WILL change for the final release version and any presets you create with this public beta may need to be manually edited to correct shifts in the location of the cabinets. If you are not comfortable with this caveat do NOT install this firmware.

The firmware is now comprised of two components: a main firmware image and a Dyna-Cab data image. BOTH must be installed!


INSTRUCTIONS. FOLLOW CAREFULLY!!!
-------------------------------------------------

1. Make sure Fractal-Bot is the latest version.

2. Extract the firmware .syx file and the dyna_cabs_1p02.syx file from the archive.

3. Install the the new firmware as usual. After rebooting you will see a warning that the Dyna-Cab data is not installed. Press Exit.

4. Install the Dyna-Cab data. Drag-and-drop dyna_cabs_1p02.syx onto Fractal-Bot as you would a firmware image. Send the data. Reboot when instructed.
================================

Here's a link to the required version of Axe-Edit:
https://forum.fractalaudio.com/thre...supports-fw-22-00-public-beta-6-and-9.193277/
 
Changes from previous beta:
  • Added 2x12 Chiefman and 2x12 Class-A 30W Dyna-Cabs.
  • The Cabs page of the Cabinet block now features a "Transpose" button in Dyna-Cab mode. Pressing Transpose will transpose the arrangement of the parameters. This makes adjusting a single cabinet's parameters easier.
 
Thanks Cliff and FAS team! I am pumped to try these new cabs!

What speakers are in the Class-A 30W? Blue, Green, Silver?
 
In case people are wondering what the Transpose feature is, it's just an alternative view of the main Dyna-cab parameters on the onboard UI, showing only cab, mic, position and distance params for each cab slot. On Axe-Edit this is not needed since you see all that anyway.

It definitely makes adjusting those cabs easier as you can use the A knob to scroll which cab to edit and B-E to adjust its params quickly.

Nice to see Fractal add convenience features to the onboard UI!
 
Is the 2x12 Chiefman:
1) 2 cabs: 1x M25 + 1x H30?
2) 1 cab: a blend of M25+H30?
3) 1 cab: only M25 or only H30?
 
Status
Not open for further replies.
Back
Top Bottom