Axe-Fx II Firmware 15.05 Released

Oh yeah! and just keeps on deliver... Thanks!!

release notes

Added “Lowhshelf 2” and “Highshelf 2” EQ types to Filter and Parametric EQ blocks (in the Parametric EQ block these are referred to as “Shelving 2” types). These types recreate the analog shelving filters found on classic mixing consoles. These filters are somewhat quirky and exhibit “overshoot” which gives them a certain musical quality. Set the Q between 0.5 and 0.707 to recreate those classic sounds or experiment with the Q for different amounts of overshoot. These filter types are great for getting that massive sound associated with passive equalization.

Added selectable filter types to bands 2 and 4 in the Parametric EQ block. These bands can now be set to Peaking, Shelving or Shelving 2 types (where Shelving 2 selects a Lowshelf 2 for band 2 and a Highshelf 2 for band 4).

Added various “Passive EQ” types to Graphic EQ and Amp blocks. These EQ types are modeled after classic analog EQs and specifically tuned for guitar amp equalization.

Added “Master Q” parameter to Graphic EQ block. This parameter adjusts the Q of all bands. A value of 1.0 sets the Q to the default value (typically one octave). Lower values increase the bandwidth and overlap of each band, higher values decrease the bandwidth.

Added runaway feedback protection to Tape Delay algorithm when Drive is set to zero.

Moved Noisegate and Main Output edit menus in Layout page. To enter these menus select the “In/Gate” or “Output” blocks in the layout grid and press Edit. The Layout grid now “wraps around” as well.

Added Modifier connectivity to Threshold and Ratio parameters in Noisegate.

Fixed 5153 Blue amp model causing lockups.

Added 256 more preset locations for Axe-Fx II XL models (768 total).
 
*******************************************************************************
15.05
Fixed Master Q defaulting to 0.1 for older presets.
*******************************************************************************

15.04
Added “Lowhshelf 2” and “Highshelf 2” EQ types to Filter and Parametric EQ blocks (in the Parametric EQ block these are referred to as “Shelving 2” types). These types recreate the analog shelving filters found on classic mixing consoles. These filters are somewhat quirky and exhibit “overshoot” which gives them a certain musical quality. Set the Q between 0.5 and 0.707 to recreate those classic sounds or experiment with the Q for different amounts of overshoot. These filter types are great for getting that massive sound associated with passive equalization.
Added selectable filter types to bands 2 and 4 in the Parametric EQ block. These bands can now be set to Peaking, Shelving or Shelving 2 types (where Shelving 2 selects a Lowshelf 2 for band 2 and a Highshelf 2 for band 4).
Added various “Passive EQ” types to Graphic EQ and Amp blocks. These EQ types are modeled after classic analog EQs and specifically tuned for guitar amp equalization.
Added “Master Q” parameter to Graphic EQ block. This parameter adjusts the Q of all bands. A value of 1.0 sets the Q to the default value (typically one octave). Lower values increase the bandwidth and overlap of each band, higher values decrease the bandwidth.
Added runaway feedback protection to Tape Delay algorithm when Drive is set to zero.
Moved Noisegate and Main Output edit menus in Layout page. To enter these menus select the “In/Gate” or “Output” blocks in the layout grid and press Edit. The Layout grid now “wraps around” as well.
Added Modifier connectivity to Threshold and Ratio parameters in Noisegate.
Fixed 5153 Blue amp model causing lockups.
Added 256 more preset locations for Axe-Fx II XL models (768 total).
*******************************************************************************
 
Last edited:
Moved Noisegate and Main Output edit menus in Layout page. To enter these menus select the “In/Gate” or “Output” blocks in the layout grid and press Edit. The Layout grid now “wraps around” as well.
Click to expand...

This is actually very nice. The wrap around behaviour especially. Thank you.
 
I cant see those Digital numbers/values in Output levels still there ,would be nice to know why those are hard to convert there.
 
Good point ,sure it would be very nice to have that feature. I was hear that have been request already in Axe FX Ultra too ,and that was make me thinking is that impossible to convert somehow. And i think i would not asking again ,if i can get answer for that.

Chris@KatsuKuriMedia said:
if they told you why, would you stop asking for it? haha probably not :) it'd be nice to have though.
Click to expand...
 
GAH! Every frickin' time!

Won't boot up after update. Just a black green screen and all lights lit. No, no MFC connected. Yes, waited more than 5 seconds. Fractal Bot was still connected. Tried disconnecting USB. Tried holding down Recall and booting. Nothin'...
 
You must log in or register to reply here.
Back
Top Bottom