• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Axe-Fx II doesn't work good with MFC-101

Ju Lee

Inspired
Hi.
My Axe II works good, but when I connect the MFC the presets don't change quickly or don't change directly.
I reset the MFC and the result is the same.
Sorry my bad english level. Thanks for read it and try to help me!


Edit. I made a mistake in the thread name!!!!
 
Last edited by a moderator:

Johnnyh64

Veteran
Try a new cable? Make sure it's plugged in thoroughly and remember to always make sure the Axe FX is off whenever connecting the MFC.
 

Ju Lee

Inspired
Try a new cable? Make sure it's plugged in thoroughly and remember to always make sure the Axe FX is off whenever connecting the MFC.
Thanks for the answer. I Turn the Axe II with MFC plugged.
In I/O>Midi I have selected Display Offset 1, and in MFC, I select EDIT>SETUP Channel 1 Display Offset 0, and also Channel 1 Name Chan 00.
I'll try with another cable, but I haven´t one other yet
 

Scott Peterson

Global Moderator
Moderator
Do you have the USB plugged in and the editor on?

If you do, then unplug it. (*Or use the pause communication in the app).
 

Ju Lee

Inspired
I write the configuration of my MFC Edit options:
SETUP:

Axe-Fx Mode II > PerfMode PRESET > Axe_Fx DisplayOfst 1 > MFC101 DisplayOfst 1 > Ch 01-16 DisplayOfst 0 > Ch 01-16 Name Chan 01-16 > BankSize 5 > BankStyle CURRENT > Bank/Song Limit 077 > Bank/Song Wrap ON > IASw 01-17 Type TOOGLE > IASw 01-17 Global NO > IA01-17 Send w/Prst YES > IASw 01-17 Name IASw 01-17 > LinkA -- -- -- -- -- > SendSwLinkOffMsg YES > IntCC01-17 Name IntCC01-17 > XS1-4 Type MOMENTARY > XP1 Min 000 Max 127 > GlobalPreset OFF > HoldAxeTap=Tune ON > Axe-Fx IaOffLed RED > SaveEditsSwitch OFF > Edit Menu SHORT > Looper Control LONG > SysEx Data DUMP! > Delete PRESET 001 > DisplayCOntrast 08 > FW VERSION 3.00

MIDI:

Use Port EXPANSION > Axe-Fx MIDI Ch 01 > Axe-Fx TotalSync ON > Axe-Fx TxMap 001->001 > MIDI Rx Channel OFF > Rx ProgramChange OFF > ProgChgMap 000->001 > IA01 Axe-Fx SCENE1 > IA01 c1 CC#001 Ch01 (IA02-09 CC#002-09 Ch01, IA10-17 CC#120-127 Ch01) > IA01 c1 Off000 On127 > IA01 pOF PC#OFF Ch01 > S01 OF 1 -- -- -- -- > IntCC 01 CC#OFF Ch01 > IntCC 01 Of000 On127 > XS1 #OFF Ch01 TypHDW > XS1 Off 000 On 127 > XP1 #011 Ch01 BegOFF (XP2 #016, XP3 #OFF, XP4 #OFF) > XP1 Min 000 Max 127

PRESET:

Preset e.g. 003 > Name MFC-101 > Ch 01 ProgChg 003 > Alternate Preset GBL > IASw 01 OFF > IntCC 01 OFF > Custom 1 -- -- -- -- > XS1 #GBL Ch01 TypHDW > XS1 Off 000 On 127 > XP1 #GBL Ch01 BegOFF > XP1 Min 000 Max 127
 

Ju Lee

Inspired
And my Axe Fx II I/O Menu configuration:

MIDI CHANNEL OMNI
MIDI THRU ON
PROG CHANGE ON
MAPPING MODE NONE
MAP FROM PRESET 0
MAP TO PRESET 0
MAP TO SCENE 1
SCENE REVERT OFF
SYSEX ID (INFO ONLY) 00 01 74
DISPLAY OFFSET 1
IGNORE REDUNDANT PC OFF
SEND REALTIME SYSEX ALL
MIDI PC OFFSET 0
USB ADAPTER MODE OFF
 

Rain

Forum Addict
It looks like it could be maybe be a bad switch. In the Video it looks like Buttons 1-3 work ok but when you hit switch 4 there's a problem.
 

chris

Legend!
thanks for the video and all the information. it will help us figure out what is going on. that is strange. i'll have to think about this.
 

chris

Legend!
It looks like it could be maybe be a bad switch. In the Video it looks like Buttons 1-3 work ok but when you hit switch 4 there's a problem.
strange though, it froze for a bit, then instead of going to 009 it stayed on 008 with 009's name. then coming back down, it stayed on 009 and used 008's name.
 
Top Bottom