Anyone know how to set the Rotary block for a Badfinger song?

kmanick

Fractal Fanatic
No matter what has appeared on my list of songs to learn for this band I've joined, anyone know how to get this sound just right?
it's a Leslie simulation
thanks
Nick
 
I use a trick from AB or someone - chorus with rotary in parallel...near end of chain...for this tune. Might have to adjust some params for your setup.
1596226260198.png
 

Attachments

  • Rotary NOMATTER_20200731_161238.blk
    332 bytes · Views: 13
  • Chorus NOMATTER_20200731_161152.blk
    428 bytes · Views: 14
Here's how I set mine:
Screenshot%202020-07-31%2016.23.19.png

Not sure how many of the parameters are the same on your box, but this batch of settings gets me really close for pretty much any guitar/leslie track....
 
This should be in the ballpark.



PRESET LINK FOR AxeFX3 - right click & save as....

I used a 1987x and some legacy factory IRs (4x12 Mar PR-H55 Full (OH), 4x12 Basketweave G12M25, and 4x12 Brit BB 160 ML) for the cab in the recording. Here are the settings I used for the amp:
Screenshot%202020-07-31%2022.49.20.png
 
Last edited:
Just revisited the cab selection in this preset. Use Cab Channel B, of the ones in here for a better sound. Not sure what happened with Channel A, but the cabs seem to have got mixed up. In fixing it, I found my favorite: York Audio's YA MRSH 412 M20 with a 57/160 mix. Absolutely outstanding sounding IRs....
 
thanks I'll give this a try (I actually should've posted this in the Fx8 section as that is what I'm using with my JVM ) but I figured I'd bet more activity on it over here.
I found a couple of older threads and tried their settings but it's almost "over kill" if you know what I mean. Can you show me the setting fo the chorus as well?
thanks
Nick
 
Back
Top Bottom