Adam Jones Friedman mod

Hi everyone,

I am just wondering if anyone can help me translate the below amp mods performed by David Friedman on Adam Jones' Marshall to the axe fx.

"Its a 1959 late 70s with jj el34s and chinese preamp tubes. It is super lead spec w/ 100k feedback on the 4 ohm tap it has a .68 cap for the presence and a .68 for v2 also the caps out of v1 are both .022s. The amp is biased to 25ma and he jumps the channels with a cable. Dave"
"His Super Bass is a late 70's. Probably a '76. It's been modified to Super Lead spec. .68 bypass caps on both V1 and V2. .022 caps throughout. 100k NFB on the 4ohm tap. Channels Jumped."

Basically I just want to know what settings in the amp block should I muck around with.
1618451053371.png

Here's what I've done so far:
1618450814725.png

Aside from changing preamp tube type below everything else is stock settings.
1618450856245.png
1618452767774.png

I've read over the user manual to try and figure out some of the stuff but not really getting anywhere....

Cheers!
 
Last edited:
Back
Top Bottom