Activating two blocks with one footswitch?

[rp911]

Apologies if this has been asked before ... I use the AX8 to gig live and the overdrive I prefer (the Plus) at the gain setting I want doesn't have enough volume to match the non driven signal, even with the output cranked to 10. So I want to add a filter after the drive block to boost it by about 2 db but only when the drive block is active. Is there a way to put drive 1 and filter 2 on the same footswitch -- or change filter 2 globally so it would always come on when drive 1 is engaged?

 

[AlGrenadine]

Scenes are made for this

 

[Habuman]

If you want to have both drive and filter on a footswitch separate from scenes, assign a control switch.

 

[rp911]

Brilliant, control switch did the trick! Thank you.