We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Tags

switch

M
MIDI that controls both Axe 3 scenes + external pedals (preamp ones such as OD and Noise Gate)

I am looking for a MIDI foot controller than is small and portable, and can be setup to control both the Axe FX 3’s scenes and presets switching AND external pedals I use in front of the preamp (OD, Noise Gate). I currently use the Fractal’s amp modeling (so IN1 > OUT1) as my clean tone. I...
- MetalMan
- Thread
- Aug 13, 2023
- axe 3 midi pedals scenes switch
- Replies: 25
- Forum: Axe-Fx III Discussion
M
Recommendations on how to connect/use a single studio headphones with both an audio interface and Axe Fx 3?

I want to have two signal paths (audio interface + Axe 3 Headphone Out) into my single studio headphone. The signals wouldn’t be combined, rather than changing scenes would change the signal being used (Axe 3 = clean tones, Audio Interface = 4CM tones). My current setup: Guitar > OD > Noise...
- MetalMan
- Thread
- Aug 12, 2023
- headphones help output signal switch
- Replies: 6
- Forum: Axe-Fx III Discussion
A
Wish Switch per Scene

All my sounds that I need for a performance are organised in a preset. I select these via the scenes. I then use the layout of the effect selection. Now I would like to be able to switch different effects depending on the scene. Therefore, I would like to have "switches per scene" in the future...
- aalrh
- Thread
- Feb 2, 2023
- fm3 fm9 per scene switch wish wishlist
- Replies: 26
- Forum: FM9 Wish List
Switching between controlling multiple modifiers

Hello! Sorry if this was already talked about, I couldn't find anything, but it might be lack of my search abilities or just naming a problem differently :) I'm trying to assign my expression pedal (Pedal1) to two parameters - for example delay mix, and tremolo rate. I would like to switch...
- Owczar
- Thread
- Oct 6, 2020
- expression modifiers multiple switch
- Replies: 4
- Forum: FM3 Discussion
WISH: Global Control Switch

It would be great to have 2, maybe 4 global control switches, that keep it's state across all presets. My particular application would be using Pitch Shifter as Virtual Capo, and if I would activate VC in preset 1, it should affect all other presets that have that block. That would allow to use...
- Wallygatorr1976
- Thread
- Jul 1, 2020
- control global switch
- Replies: 1
- Forum: FC-12 and FC-6 Controllers
FM3 - But There's Only 3 Switches? (Video)

What can we do with only 3 switches? (Photo by permission from Leon T)
- orion32773
- Thread
- Apr 3, 2020
- fm3 switch
- Replies: 7
- Forum: FM3 Discussion
Boss FS-6 to switch presets in Axe Fx Ultra

Just double checking my work here, I'm thinking about buying a Boss FS-6 and have it set to increase/decrease presets for my ultra. Ill be running a TS cable form each output on the FS-6 into the Pedal 1 and 2 inputs on the Ultra. I'll set the FS-6 to latching. One reason I'm asking is because...
- drewfitz11
- Thread
- Sep 24, 2019
- footswitch pedal preset switch
- Replies: 0
- Forum: Ultra/Std Discussion
3D Printed External FC Switch Box / Expression Box

I mentioned this idea in another thread... was inspired by @lqdsnddist build of an external switch box. I modeled a 3D switch box in Tinkercad, to match the profile and switch spacing of the FC-12. Designed it to accommodate four momentary foot switches and two expression potentiometers...
- creativespiral
- Thread
- Aug 25, 2019
- 3d print box external footswitch potentiometer print switch trs
- Replies: 72
- Forum: FC-12 and FC-6 Controllers
I switched! Axe-Fx II to AX8

I appositely love the AX8! I've had the AXE FX II since it was released and was completely satisfied with it. I do have to say after now having the AX8 I'm even happier with that though! I play away from home a lot so I'm sure that is a big factor but so far I haven't had any CPU limitations or...
- guitarfreak365
- Thread
- Sep 26, 2018
- ax8 axe fx ii fractal switch
- Replies: 24
- Forum: AX8 Discussion
Loop Control Menu Question

Is there a way to move the initial "stomp" from the REVEAL switch to another switch? For example, I want to move the Loop Control Menu button to "3" on the MFC. Is this possible?
- Horriblyright
- Thread
- May 22, 2018
- loop control mfc switch
- Replies: 2
- Forum: MFC Discussion
N
MFC101 Preset Up switch goes back to 001 after 077 preset SOLVED

I'm hoping someone can help me out. I have an Axe FX 2 (firmware 9.02) and the MFC-101 (firmware 3.09). I set my Incr Up and Down Switches to switch Presets one at a time. Once I get to preset #077 and then click up to go to 078 the MFC goes to preset #001. How can I make the MFC keep going up...
- nuke126
- Thread
- Dec 28, 2017
- mfc mfc101 presets switch
- Replies: 3
- Forum: MFC Discussion
Implemented Assign a Block to Multiple Switches [IMPLEMENTED in Q 4.00]

Related to (or maybe "in lieu of") my previous suggestion to add a 3rd latching mode to switches, it would be nice to be able to assign a block to more than one switch. Use Case #1: you need a boost switch set to momentary for quick phrases or fils, but you need another boost switch set to...
- benvigil
- Thread
- Jul 8, 2016
- latching momentary phrase switching spark switch
- Replies: 13
- Forum: AX8 Wishes + Bugs
IA Switches Initial State

Hi, tldr: lights don't change state when changing presets (MIDI, no Axe-FX). I have just started reprogramming my MFC-101 for controlling midi gear (I don't own an Axe FX) and can't get the Initial state of the switches to be "on" with the led lit up. I'm using MFC-Edit and regardless of how I...
- shawngs
- Thread
- May 10, 2016
- access initial instant led off state switch
- Replies: 5
- Forum: MFC Discussion
External Switches instead of Pedals?

Hi MFC-101 experts, is it possible to program the MFC-101 to use external foot switches instead of expression pedals? I'd like to have 6 foot switches and 2 expression pedals, or 8 foot switches if possible….
- shawngs
- Thread
- May 9, 2016
- external pedal switch
- Replies: 8
- Forum: MFC Discussion
G
Switching scenes from controller making Axe fx 2 enter edit screen??

Hi Axe FX users, I have a problem I'm trying to fix with my Axe FX 2 XL and Scenes. I have an MFC 101 mk III and intend connecting pedals to it, expression and momentary or latching types. I also have a small Rocktron Midi Exchange which I will be using where floor space is tight as it is...
- Gene
- Thread
- Jan 13, 2016
- pedals switch
- Replies: 2
- Forum: Axe-Fx II Discussion

Tags