routing

  1. M

    BASS: Routing Problems (DI and amp signal on seperate outputs)

    hi all! fm3 user from vienna, austria here. my idea for my new bass live rig would be to give our FOH engeneer 2 different signals. i want to give him just the basic "clean" DI signal with one output & then my amp simulation & "wet" rig with the other output. so that he can blend those 2 sounds...
  2. A

    Headphone routing question

    Apologies in advance for a beginner question, but I'm trying to understand the right way to handle this situation without having to make edits each time: 1. When playing out, I use a poweramp & cab, and therefore don't want cab sim enabled in the unit. 2. Practicing at home is via headphones...
  3. bhvr

    Preset Routing & Hardware Routing as Outboard FX Unit

    Hey all - was long time user of Axe FX II, now picked up an Axe FX III MK II, and trying to figure out some routing questions. From what I can tell, the I/O routing setup for each preset is baked into the preset itself, and not a global parameter. What I'm trying to do is use the Axe as both an...
  4. Sylosis

    Need help routing pedals please!!

    Hey everyone i'm still pretty new to using the Axe. If someone could help me out I'd highly appreciate it! I have two Strymon pedals that I love (the Timeline and the Big Sky) and i would like to route them through my AxeFx/Axe-Edit kind of like an FX loop. Instead of using the reverbs and...
    • Sylosis
    • Thread
    • advice axefx 3 fx loop routing routing problems strymon
    • Replies: 7
    • Forum: Rigs and Routing
  5. F

    Routing Question

    Hi Everyone, I have a routing question and any help is much appreciated. I'm using the FM3 in 4CM method with my amp. My routing is as follows Guitar -> Pre effects pedals -> FM input Out 2 -> Amp Input Amp Send -> In 2 Out 1 -> Amp Return I'm using a piezo equipped guitar and for the piezo...
  6. Benedicto

    FM3 Recording guitars, FM3 with Neve 1073DPA preamp a good idea?

    This might seem dumb as this preamp isn't really meant for guitars as I understand it, but here goes: I have access to a Neve 1073 DPA hardware preamp, and also have an Apogee Element 48 soundcard. Being unfamiliar with the 4 cables method, and also needing to record a DI track simultaneously...
  7. C

    Axe FX II as interface

    Hey all, I'm feeling super frustrated - I am trying to set up the AXE FX II as part of an aggregate device with my Focusrite Scarlett Solo. I had this setup working about a month ago, but then I went on vacation and stored everything away until I got back. Now I'm experiencing 2 problems: 1...
  8. hensh!n_vfs

    Output Routing for Logic Pro X (Using Output 2 Vs Output 1 for Stereo Mixing) - SOLVED (Accessibility Settings)

    I'm wondering how everyone is routing their Axe FX III within Logic Pro X when using the Axe III as their interface. I know a lot of people use additional audio interfaces in conjunction with their III, but I prefer to keep a simple setup. I spend the majority of my time mixing, playing over...
  9. ApocalypticKatana

    Sending Windows 10 Audio Digitally to AX3's Layout Grid?

    Is there a way to send audio from windows 10 (google chrome, iTunes, windows media player etc..) DIGITALLY to the layout grid in ax3? My problem is whenever I use a physical connection , for example Motherboard's Line Out > 1/4' inch TRS cable > split into the AX3's Input 2 Left and Right, I...
  10. F

    FM3 routing question

    Hi Everyone, my first post here. I’m contemplating getting an Fm3. I had a question though regarding routing. Is it possible to route a stereo signal with one side going into an FRFR can (fm3 cab enabled) and the other side going into a poweramp and cab (fm3 cab and power amp disabled)? Also is...
  11. S

    Axe-Fx III + using Logic-based effects

    Been really rocking my new Axe FX III - stellar stuff! But I've really been trying to wrap my head around routing and tried a bunch of different settings and routings but I can't figure this out: I use a few different effects inside Logic, like Native Instruments Replika which I adore, and...
  12. VanDaven

    FM3 S/PDiF routing / signal flow

    I just received my FM3 and I am blown away by what it offers (even though I own the AXE-FX III). At the moment, it is connected to a Lynx HiLo via S/PDiF, examining an issue with a pretty low input level led to the following findings: • The FM3 S/PDiF output is dependent on the levels set on...
  13. O

    Windows Audio on Out 1 AND Out 2

    Hi all, I'm new here, so forgive me if this is a noob question but I've looked pretty hard and haven't found a good answer yet. I'm trying to replace my audio interface with the Axe-FX III so that I don't have to purchase a separate mixer. Yes, I understand that the Axe-FX III is not a mixer...
  14. Entasis

    Turning a stereo FX loop into a serial FX loop

    I wanted to see if it was possible to run two pedals in serial while only using one of the stereo FX loops... it is! The patch allows you to plug one pedal into the left ins and outs and another in the right ins and outs and, while changing scenes, have the left pedal go into the right or the...
  15. wolfdogg

    Running Axe-Fx 3 Into Reaper - Asio Question

    Hi all. Still in my first week with my new Axe FX III toy so be gentle (my first Fractal purchase ever). I'm trying to hook it up to Reaper tonight. I can do it fine if I run into my 16 channel Tascam and then into Reaper, but.. trying to create a more portable solution and bypass the Tascam...
  16. Alex Kolund

    Wish: X/Y for FXLoop Block

    I often find myself making duplicate presets, one with the FXLoop Block uses as a block (with external hardware in my home studio) and the other as a second output (to drive an amp in addition to or instead of a PA when I'm playing out). The FXLoop doesn't currently support X/Y options but...
  17. J

    Using AXE-FX to FOH w/ a tube amp

    Hey guys i've been back and forth and just been dreaming of possibilities of the new 3 (im on the list)! I currently have a Peavey invective on the way and notice that it has an xlr out silent recording. Could i run the amp in silent mode then run my Axe-Fx through the FX loop (of the...
  18. JustinBourdeau

    Using Axe-Fx II for FX in Reaper?

    Hey guys, I've got a question for the routing and signal path geeks. I'm hoping I can explain myself clearly on this one: Before I start, here's the gear I'm using: AxeFX II Mark II Digi 002 Rack Reaper (DAW) I want to use my AxeFX as an FX box for my mixes in Reaper. For example, I'd like to...
  19. F

    Ax8 left/right routing--> 2 different sounds

    Hi! New to Axe fx... Would like to know if you can split and hard pan your signal in L and R so you have 2 chains you can edit (with different amps/cabs and fx). In this way you have 2 amps even though There's no 2nd Amp setting on the Ax8. Is this a thing of is it not possible? Thanks!!
  20. Genghis

    One Amp - Two Preamps Routing & Pan Question

    Hi everyone. I'm running a 5150 III 50w head with the FX8, and I'm planning on incorporating one of those new Diezel VH4 pedals into my setup for an alternate metal tone. (Mostly for a second flavor when I double track rhythm guitars.) This pedal can be run either into the front of the amp...
  21. Niels Beier

    New to FX8

    Hi guys, I just got a second hand FX8 Mk I, and I'm really stoked on integrating this in my setup - however, I'm an analog caveman - your digital and midi-controlled effects confuses me! Currently I'm running a Marshall JVM410hJS, which I controll all the switching on via MIDI, while running...
  22. Grit

    [NOT A BUG] Input 2 not routed to Output 2 when in Global Bypass

    Hi all - as title suggests, I'm having a bit of trouble with global bypass. Instead of Input 1 being routed to Output 1, and Input 2 being routed to Output 2, I'm getting Input 1 routed to both outputs. I have "Output 2 echo Output 1" selected in the I/O menu, but the block diagram at the end...
    • Grit
    • Thread
    • bypass global bypass output 2 routing
    • Replies: 9
    • Forum: Axe-Fx II Bugs
  23. Ytolyccuz

    AX8 plus H9

    Hi Guys, I'm very new to FAS stuff. I'm just about to order an AX8 and I'm pretty much decided to use my H9 to alleviate some processor load from the AX8. Is it possible to I can achieve this connection: H9 stereo outs connected after the AX8 preamp section, with two output sections from...
  24. actionjackson12

    HOW TO BUILD/ROUTE A PERIPHERY/TESSERACT LIVE RIG???

    Hey all, I'm in self produced two piece prog metal band and the plan, live, is to play to a click with in-ear monitoring, and the axe-fx II controlled via program/control changes via Logic 9 (perhaps cubase or pro tools down the road) through a macbook pro with a few parameters controlled...
  25. L

    Axe fx routing for live?

    Hey guys! I'm kind of a noob and I need some help! I need to learn how to set up my axe fx for live use (FOH). I have a power conditioner, power amp (matrix gt1600) and the Axe fx 2 XL. Now first question: do I need the power amp to go FOH? Or can I just connect the output 1 of my axe fx...
  26. D

    Is this routing possible? Guitar to analog out; Spdif in to headphone out without guitar signal.

    So I am trying to see if I can keep my portable recording / band practice rig to a minimal. I have been sending an axe analog out to digital mixer. Then doing all monitoring from the mixer headphone outs. Now, I need 1 more monitor mix and was not using the Axe headphone output at all. So, I...
  27. Ytolyccuz

    Saving "Venues" on the AX8

    Hi, Would like to ask if it's possible to store routing and output settings for a specific venue profile. I hope it's possible to edit, store and recall these settings to be applied to a set of patches. The reason being is so that I can have a way to speed up setup time and consistency by...
  28. I

    Anyone using an analog preamp into Axe FX's FX Loop?

    Hello, I am researching the best way to solve my silent recording situation. I am fascinated by the Axe Fx's expanding library of amps and cabinets and it's very flexible routing system. I have read dozens of threads and most of the manual and I have not been able to find the answer I am...
  29. R

    How to pan in ear monitors with axe fx?

    I want to set up an in ear monitoring system. I have an axe fx two (which has both balanced xlr outputs and unbalanced outputs) and a backing track that is coming out of an audio interface. I would like to set up a in ear system that would allow me to pan the signal of my guitar to one side of...
Back
Top Bottom