reamp

  1. X

    Axe Fx 2 and Logic Pro Reamp issue

    Hello Everybody, I am facing a problem trying to reamp a guitar signal from my Axe Fx 2. I am already changed the input source signal to USB in I/O seeting on my AXE FX and the input - output device on Logic to axe fx II. I create a new track(armed), solo the di track, i am listening the tone...
  2. L

    Reamping - Still hearing the DI

    Hi guys, I have setup reamping with my FM9 Turbo however, when I reamp the DI track I can still hear the actual DI on top of it. All other tracks are muted so not really sure where I've gone wrong. Watched Carter's video on reamping and looks like I'm doing everything fine but I guess not lol...
  3. trancegodz

    Reamping

    I just tried reamping for the first time with the Axe FXIII and Digital Performer 11. It worked great and was pretty easy to do following the instructions in the current manual. I have a question for you guys who use this all the time. If you record a song and change scenes in the Axe FXIII...
  4. A

    Anyone using the FX3 in an aggregate audio interface on mac?

    Ever since I got my FX3 (and that was years ago), I've been using it as part of an aggregate audio device in MacOS to make my workflow in Logic a little bit simpler. Basically, this is what my setup looks like: I have the Axe connected to my Mac Mini via USB I also have a mixer connected to...
  5. HOLYxVIER

    Connecting Apollo x8p and AxeFX3

    Hi Guys, Maybe that's gonna be a "noob alert" but I'm wondering so I'm asking rather than trying to guess. I got a really good deal on an Apollo x8p and I was wondering how to connect it with my axe 3 ? My questions are : 1 - How can I connect it "Which kind of cable setup" 2 - How should I...
  6. K

    No Playback Sound in Cubase 11

    I finally bought some monitors and now I'm struggling to set the Axe-FX II MKII as my audio interface. I can hear myself record but I cannot hear anything when I play back the recorded audio unless I set 'Main Input Source' to USB. Here's my current setup: Guitar -> Axe-FX via Input 1 - L/Mono...
  7. C

    Recording in adobe audition with axe ultra and interface

    So I got an axe ultra MKII for christmas as it's all I could afford and I love it except for having to use an audio interface instead of USB. I'm fairly new to recording my own stuff using a daw and even newer to ideas like DI and reamping. But I have a friend who is helping explain. My issue is...
  8. Guitar Of Justice

    Axe-Fx 3 Reamping with Audacity via USB, not working

    Hello Internet! I try to reamp with my new axe and it somehow not working with Audacity. I have a DI-Guitar Track (not recorded with the axe) but I wanna use it. On my Kemper i set the output on Audacity to SPDIF Kemper and on the Kemper I set the input to SPDIF and voila there you go with...
  9. L

    Stereo Reamping with Axe 3?

    I have a stereo guitar DI going to the axe and back via USB, and if I only have the input and output blocks, it remains in stereo. But when I add and amp, cab etc, it combines to mono. How do I reamp via USB in stereo?
  10. guitarfreak365

    DI record and reamp with Axe II

    Im new to this stuff so sorry I’m I’m way off. I wondered if there were any resources to help me learn how to do DI recording and reamping with the axe ii. I use studio one pro and was wondering if I got a Audient ID audio interface if I could run my axe fx ii direct and then be able to reamp. I...
  11. S

    Reamping with UMC404 - Desperate for help!!!

    Hey guys, I'm not one to ask for help without doing some serious research, but I'm completely out of ideas on this one. I've spent hours and hours trying to reamp with my brand new Behringer UMC404HD with no results. I specifically upgraded to it so I could reamp with my new AX8. Here's my...
  12. Chris S.

    XL+ and DI box Question

    Im wanting to recording both wet and dry tracks so I can reamp later if I need to. I just picked up a Countryman Type 85, assuming that I could split the signal from my guitar and record both tracks this way.. but I don’t think I did my homework, and I need help. My signal chain, without the...
  13. Armando

    Reamping 2 DI Tracks Simultaneously

    Hello, Is there a way to reamp 2 DI tracks simultaneously with the Axe Fx II? I want to see how things sound when they're double tracked, is there a quick way of doing this? Thanks!
  14. Detch

    Deathcore mix, Angle Severe 1 + Ownhammer

    Yea, it's metal again :) Recently I finished mixing this track. For re-amp I used Angle Severe 1 model + Ownhammer HHC II 412 EDVH with V30 cab which is EVH 5150 III 4x12 cabinet DI files were good but had some low-end mud issue so I used two filters at the beginning of the chain: With...
  15. N

    Need Help With Routing And Reamping

    Hi, I've been trying to figure out how to reamp guitars using my Axe Fx Ultra, Focusrite Scarlett 6i6, and Reaper. This is how I'm currently routing my setup: Axe Fx Rear Output 1 > Input 1 Focusrite Rear Output/Line 3 Focusrite > Axe Fx Rear Input 1 I have disabled the master/parent send...
    • nlee89
    • Thread
    • axe fx ultra help reamp reamping reaper routing problems
    • Replies: 4
    • Forum: Rigs and Routing
  16. S

    Analog Reamping

    Hey guys. Long time AxeFX user, first time poster. I'm usually able to answer my own questions by doing searches but I have a unique scenario that I hope someone can help with. Before I get into it, here's my full setup for reamping an existing dry track in pro tools. Imac>PTHD10>Dry guitar...
  17. M

    AX8 Reamping via Out 2 (FX SEND) Echo?

    I just got an AX8 and while reading the manual noticed (with regard to the IO - Audio menu Out 2 echo setting): "Selecting 'INPUT 1' copies the raw unprocessed INPUT 1 signal to OUTPUT 2, and is ideal for capturing a dry track for 'reamping' without using the FX Loop block. Note that the echo...
  18. Schwiz

    How To Digitally Reamp Using AxeFx, Scarlett, Cubase

    There are some really good threads on this forum in regards to reamping. I saw one the other day where the OP had created a nice PDF diagram even. That diagram helped steer me in the right direction for figuring out how to use the Axe Fx to DIGITALLY reamp tones using the Scarlett Mix Control...
  19. G

    Dual amp parameter linking for studio reamping L and R guitars

    Hi guys, so I exclusively use my Axefx 2 for studio use. I always reamp both left and right rhythm guitar through the line in's on the rear of the unit and end up running two separate amp rows. Typically I like to have both the left and right identical in tone and having to adjust both rows one...
  20. Ytolyccuz

    Recording with the Axe

    Hi, It's my first time to record with the Axe Fx 2. I have managed to do a somewhat successful reamp test but I feel that my workflow is pretty inefficient. Question 1: Realtime Track Auditioning with other tracks. My problem is when I try to audition the track for reamping with another...
  21. Jotun666

    The Sinnergy - Lizard (reamped with Axe FX II)

    Hi, guys! I just wanted to share my latest work at Jotun Studio (http://www.jotunstudio.es and http://www.facebook.com/jotunstudio). It´s Lizard, from The Sinnergy, whose EP, Epidemia, I reamped using the Axe FX II (Engl Powerball sim and SVT for bass), and also edited, mixed and mastered...
    • Jotun666
    • Thread
    • engl jotun jotun studio leo peña lizard mix powerball reamp studio the sinnergy
    • Replies: 0
    • Forum: Axe-Fx II Recordings
  22. Jason Scott

    Workaround for Multiple Soundcards in my DAW

    I've been scouring the net and this forum for posts related to using the Axe FX via USB in conjunction with another sound card in my DAW. From what I've read, a multiple sound card setup seems to work for some people because their DAW allows for multiple sound cards, however it's a real issue...
Back
Top Bottom