output 1

  1. H

    Using Output 1&2 with monitors

    Hello! I am using the AxeFX 3 as my audio interface currently. I mostly track guitar and drums, and have a Roland ekit running through the AxeFX as well. I would like to be able to set up the system to output the guitar through 1 and the drums through 2 so I can manually adjust them on the...
  2. JeffNeiman

    XLR Outputs much hotter than 1/4 outputs

    Good morning! I was just testing some of my cables to compare the overall noise floor and I've found that my XLR outputs are much hotter than my 1/4 outputs. I found this by running a sine wave from the synth block through one of my presets (tuner mode enabled) into my Focusrite Scarlett 4i4...
  3. sick pickle

    Maximizing outputs - did I do this right?

    Hey Fractal Friends, Yesterday I had an audition–the space had a SD PowerStage 170 and 4x12 cabinet. To prepare my preset, I routed my signal chain to output 3 before the cab block. I am not sure why I chose output 3, but I suppose I was thinking about the unity gain signal and just sending a...
  4. M

    Axe Fx II - Output 1 always clipping - HELP!

    Hi all, I have a second hand Axe-Fx II unit that I've had for a while. I only use it for recording at home but I've been having issues that I've been putting up with until now. There are many patches that I download from Axechange or that came pre-loaded on the unit where there is an insane...
    • Meisoshi
    • Thread
    • amp axe 2 axe fx 2 clipping distortion output output 1 output 1 clip output clipping output1
    • Replies: 1
    • Forum: Axe-Fx II Discussion
  5. Drew Warmington

    No sound from Out 1 (XLR)

    Need some advice guys, Recently updated to 5.01, and noticed that I am not getting sound or input at the mixer. I am getting input into the FM3 from the guitar. Tried: Changing XLR's (Out 1 L) to the mixer Output levels (12 to 1 o'clock) Changing out the guitar cable Changed to an external...
  6. trueresource

    Using both xlr and quarter inch output 1

    I have need of an additional stereo output, so I'm using both XLR and quarter inch of output 1. I have not tried this live or at high volume, but curious to know if this could cause an impedance problem or damage to my FX3. The manual says use either "OR" but says nothing about using both...
  7. camilovelandiamusic

    Route OUT2 to Headphones?

    Trying to record using a Wet/Dry setup and using FM9 as interface.... OUT 1 (Dry), OUT 2 (Wet). I only head OUT 1 in headphones. I don't want to monitor through DAW. Any way to route OUT2 to be heard through headphones along with OUT1?
  8. J

    Using both output 1's possible? Different scenarios

    Dear all, As still a noob level user but proud Axe III owner: could you help an amateur move forward on learning about different Axe III setup scenarios? :) I'm trying to learn if it is possible with the Axe III: ... to use both output 1's (so the XLR's and the quarter inches) to hear from 4...
  9. Bhargav Sarma

    Bug? MIDI CC#11 (Out 1 (Main) volume) problems

    Hi. I always set my AX8's main output volume to maximum to get the best signal into my preamp, which has a pad on it to control the signal level. When I try to use MIDI CC#11 to control the output volume, the guitar can still be heard if the value of CC#11 is ramped down to zero. Also, if I...
  10. h.c.e.

    Is there an equivalent of "USB Return Level" on the III?

    Sorry if this has been covered before, I've exhaustively searched the manual, and did a search around the forum first, but... Is there an equivalent on the III to the II's "USB RETURN LEVEL" parameter? I use my AxeFX with headphones and I'd rather not constantly chase the individual app audio...
  11. S

    Output 1 makes the mixer distort (turn red)

    So I understand that tru 0 on the AX8 is when output 1 is turned all the way up. My problem is, that if I do that. The mixer in our band get´s so much input that the level control on the mixer only can be turned up to where it starts putting out audio to the PA. And even then it´s blinking...
  12. T

    Axe Fx II Digital AES/EBU Output

    Hey guys, I'm playing a ballpark arena for my church with a production company and I had questions about the best way to hook up with my Axe-Fx. The sound technician wants to use both L and R for stereo sound. Usually I play with L going to the house and R going to my Friedman ASM-12. Can I use...
  13. S

    Finally my AX8 arrives! Basic Questions About Out 1

    Hello everyone. I'm very proud of my first post in this forum....I received this week my AX8 and I'm starting to learn how to use it, how it sounds and etc. I'm shunsho, I'm a guitarist from Chile, and I would like to ask you a simple question (sorry I can't make some test right now to solve...
  14. Jammer77

    Wish Separate Cab Emulation Settings for Out 1 XLR and 1/4"

    I have really come to rely on my external pedals in a stereo FX loop to accomplish a few extra things and save CPU. (A couple Strymon pedals, Neunaber Stereo Wet and looper). Because of this I don't have access to run Out 2 to my stereo SS amp and 2 cabs for monitors on stage. My ideal setup...
  15. CactusTone

    Output Settings Fever

    Hoping someone can help me confirm the proper Output settings for a specific live performance scenario: I'm using Axe II to run my personal monitored sound to a Friedman ASM-12 in mono from "Output 1 Left" XLR. I also want to run a mono signal to FOH. If I'm using "Output 1 Left" to the...
  16. CactusTone

    Balanced XLR Outs +4dBU?

    Here's what the manual says: "18. OUTPUT 1 - This section includes the Left and Right Output 1 unbalanced (1/4”) Jacks, Balanced (XLR) jacks, and XLR Ground Lift Switch. The main processed output of the Axe-Fx II appears at these jacks. Use the XLR jacks to connect to balanced inputs, employing...
Back
Top Bottom