mfc

  1. Guitarfreak3D

    FS AXE FX2 + MFC101 (Bristol, UK)

    Hi, Before I list on Reverb, thought I'd post here to see any fellow forum people would be interested. AxeFx2 (MKII) + MFC-101 Both purchased directly from G66 and in pristine condition. Only gigged a few times, and has otherwise been used in a home recording setup (inside a rack case, which...
    • Guitarfreak3D
    • Thread
    • axefx axefx2 bristol england for sale mfc mfc 101 sale united kingdom
    • Replies: 0
    • Forum: For Sale
  2. D

    Changing IAs

    Hey guys how ya doing? I never quite understood if you can change IAs when you change presets, I believe it's not possible. So I have a special gig and I'll have to change all my IAs because it requires some effects that don't quite appear in my routine and I was wondering if it's possible to...
  3. E

    Issue with Mission Audio expression pedal not functioning

    Hello everyone, New around here. I've searched everywhere, including in this forum already, for the last few days and I just can't find the answer to this problem. I just bought an AxeFX ii and an MFC-101 from a friend a few months ago, and I've been slowly diving into it and setting it up the...
  4. Georgy

    Another midi issue --> display on MFC not matching Axe XL display..

    Hey guys, Maybe it's my MFC? Maybe it's my Axe 2 XL? Or maybe it's just me? Not sure why this is happening but it's frustrating.. Here's what I'm doing: Using my XL + MFC 101-iii to send MIDI msg's to my amp.. it's basically changing channels on my amp which is pretty cool. I've tested...
  5. D

    How do I check if my Axe-Fx 2 expansion port is working?

    I bought a used mfc, and when I connect it via expansion it doesn't work... I'd like to know if there's any way to know if the problem is in the axe fx or the mfc, since I've tried all software related solutions and it still didn't work. Thanks in advance!
  6. reclavea

    MFC101 led metal bezel, bushing

    Anyone know where I can source these? Thanks Ron
  7. Dimitri Carrer

    Price difference between FC US/EU compared to MFC-101

    Hi guys, I must say before starting that this is not meant to be as a rude/negative/flame post. I don't wanna offend anybody or sorts, just trying to figure out something that sounds a bit off to me. Lots of time has passed between Axe FX 2 and Axe FX 3 but: I've bought from G66 EU Axe Fx 2 and...
  8. Ramses Barrientos

    Need to control my JP2C with my MFC!

    I need to control and command my JP2C via midi with my MFC-101 MarK III using scenes... how can I assign in scenes a midi commas to a IA Switch ? can anyone please help me!!!!!! Warm regards.!
  9. Ramses Barrientos

    Controlling my Mesa JP2C Ivan midi with my MFC-101 MarK III

    Hello, I’m having trouble commanding my Axe Fx II, my MFC-Mark III & my Mesa JP2C vía midi when I’m using scenes...!! someone help me please
  10. Jason King

    Is MFC-Edit worthwhile

    Hi guys, I currently have about 10 presets all with 4 scenes that I scroll through at a gig. Is there a better way? Anyone using song/set mode? I like scenes as there's no gap in switching. Currently using 0 banks and using up and down to scroll through presets. Only ever stay on one preset...
  11. Conley Shepherd

    MFC III programmed for AXE FX II - patch change takes a long time

    I have finally gotten the MFC to do what I want - but now it takes a long time to load a patch after pressing the patch change. here is the setup: 1. IA 1-5 are set for scene select and work as expected immediately when pressed in all instances 2. UP/DOWN switch patches in increment of one -...
  12. J

    WTB EXT4MFC

    Hey there folks. I’m new here. Desperately looking for an EXT4MFC
  13. oson00

    TotalSync and more with MFC-101 and Axe-Fx 3

    I am building a simple solution for using the MFC-101 to control the Axe-FX III. I build a translator-box to communicate between MFC and Axe-FX III. Totalsync is possible with some limitations! Read out the preset and scene names works! Tuner and Tap is no problem. My next step is to control the...
  14. S

    MFC-101 no longer available?

    Hello, i just visited the Fractal Shop and the G66 Shop and in both the MFC is not available anymore. Is this because the new tariffs are hitting imports from china right now, or has this other reasons? I hope the MFC will soon be available again :)
  15. Horriblyright

    Loop Control Menu Question

    Is there a way to move the initial "stomp" from the REVEAL switch to another switch? For example, I want to move the Loop Control Menu button to "3" on the MFC. Is this possible?
  16. P

    MFC-101 controlling looping software

    Hi, I'm trying to figure out how to get my MFC to control the Mobios Looping software on my Mac while using the AXE FX II as my midi/USB interface A. Is this possible? B. What are my options for wiring this up correctly? Thanks in advance!
  17. MBure

    Can MFC-101 send Midi Notes

    Hi, Can MFC-101 send Midi notes? I want to control a DMX controller with my MFC, and the DMX Controller can only receive Midi Notes - Not CC message. Any Solutions?
  18. N

    MFC101 Preset Up switch goes back to 001 after 077 preset SOLVED

    I'm hoping someone can help me out. I have an Axe FX 2 (firmware 9.02) and the MFC-101 (firmware 3.09). I set my Incr Up and Down Switches to switch Presets one at a time. Once I get to preset #077 and then click up to go to 078 the MFC goes to preset #001. How can I make the MFC keep going up...
  19. brodenxX666

    alternate MFC

    Hey everyone! So I just got axe fx ii xl plus off of a friend and I was wondering if I needed to get the fractal MFC101 or if I could just use my headrush as a midi controller. This would obviously save me some time and money but Im not quite sure how I would go about setting this up as I have...
  20. maxolla

    Help!!!MFC IA Switch 1 acting up.

    I assigned IA1 to record on the looper as the only control for that button. For some reason when I’m on any other preset but preset 1, that foot switch returns me back to preset 1 and engages record simultaneously. I’ve checked button AI 1 for any additional CC# assignment and there are none...
  21. C

    Using ANY Midi Controller - COMPLETE NEWBIE HERE

    Hi guys, I need some help sorting out a MIDI controller with the AXE FX II XL+ I'm completely new to the world of MIDI, so I dont have a clue how to hook these things up. There's tonnes of videos showing how to set up the MFC101...however, how would I go about setting up say the Tech 21 Midi...
  22. N

    Help with Looper

    Can anyone tell me how to extend the amount of time the MFC gives you to loop a chord progression/bass line etc.? The factory setting only lets you record around a 3 second loop. Thanks.
  23. moffar

    What pedalboard are you using?

    Hi guys. I'm on the lookout for a new pedalboard, and am curious about what you're using. I plan to have the MFC-101 and two EV-1's on my board (to start with), which measures 623,4mm (24,55inch) in width and 291mm (11,46inch) in depth, crammed together, in total, excluding cables. I'd also...
  24. boardwlk17

    MFC switching a voodoo labs GCX SWITCHER?

    If I'm using a Voodoo labs GCX switcher can the MFC switch loops on and off by MIDI per SCENE? Or just by PRESET???
  25. GotMetalBoy

    FAMC Liquid Foot Support is back!

    FAMC, the maker of the Liquid Foot+ (LF+) MIDI Foot Controllers has been plagued with issues in the past few years but they seem to have recently resolved most of them. The owner Jeff and his Support team have been replying to support tickets within a day and have been replying to peoples post...
  26. Richard Kaderabek

    MFC-101 keeps turning GCX Audio Switcher's loop #1 OFF

    Hello everyone at Fractal audio community, I'd like to ask you a favor because I'm completely stuck, frustrated.. During last months I decided to go completely MIDI so after some research I bought MFC controller, Voodoo Lab GCX audio switcher and RJM amp gizmo. I thought I did my homework...
  27. M

    Bug? All lights red after failed? FW update, unit locked

    After I tried to updated FW on my MFC-101 Mk III the unit is locked and all lights are red. Display blank. Does not matter if I use power adapter och Cat 5 cable. Tried the reset I found in the instruction (holding down #11 at power up). Has anyone had the same experience? Any ideas what I...
  28. musicman0001

    Max use of AXE FX 2 MKII & MFC with one External Pedal

    • musicman0001
    • Thread
    • axe fx 2 mk2 external controller filter mfc mfc 101 morphing preset exchange volume block
    • Replies: 6
    • Forum: Axe-Fx II Discussion
  29. M

    MFC 101 - Axe FX Mode - Scene Midi PC#

    Hi, I have an Axe FX 2 XL and MFC 101 Mk3. I am running the MFC in Axe FX Mode and would like to program a single preset which has buttons 1-5 change scenes as well as send a PC# Midi message to my Marshall JVM 410c. The other IA buttons I would like to assign to Axe FX functions like 'Delay...
    • malcolm86
    • Thread
    • amp channel instant access switch marshall jvm mfc midi pc# program change scene scenes
    • Replies: 0
    • Forum: MFC Discussion
  30. ZenRigs Man

    KickTags Neo-powered laser-cut glow labels available NOW!

    Hey folks! Hope you're all well. After the frenzy of the last batch I made, (when I released reverse-print glow labels for the first time), I'm pleased to say that the KickTags store is about to be restocked and that the full range of my modular magnetic glow label system will be available...
    • ZenRigs Man
    • Thread
    • ax8 gigwrx glow labels kicktags magnetic labels mfc mfc labels mfc-101 labels stomplabel stomplabels
    • Replies: 19
    • Forum: AX8 Discussion
  31. brianv4

    Bug? I'm calling it a bug...

    i first noticed this with the AX8 but now it works this way on the axefx too. if you have a parameter, let's say delay mix mapped to an expression pedal and the pedal is not connected, the delay goes to the maximum value set. So, you must have the expression pedal plugged in or bypass the...
    • brianv4
    • Thread
    • controllers expression pedal external control mfc
    • Replies: 12
    • Forum: Axe-Fx II Bugs
  32. X

    Wish Ability to disable and/or reassign the reveal button

    Hi all, firstly I have to own up, I have big clumsy feet! As a result I would be very interested in having the ability to disable the reveal button and/or reassign it to a CC. I don't use reveal day to day and sometimes I accidentally hit it without noticing, shortly after chaos usually...
  33. G

    MFC and AX8 - Is it possible?

    Has anyone been able to hook up an MFC to the AX8? I was thinking of using the MFC to turn individual effects on/off and then using the footswitches on the AX8 to change patches. Sorry if this has already been discussed preivously. Thanks!
  34. houstonwehaveuhoh

    Price might be too good to be true. What to look out for?

    Hey peeps, There's a guy in my state who is selling, as described, "Axe Fx2 Mark II w/ MFC 101 foot controller" for $1900, without pictures or much of a description besides payment. Now, maybe I just haven't been looking long enough, but it looks like a screaming deal. Anyway, I haven't had...
  35. ZenRigs Man

    KickTags MFC Labels - limited stock available today!

    Hey folks! While working hard on the next batch of KickTags, I had a little drink and decided to rest my eyes for 5 minutes, when I found some more stock down the back of my sofa! I know, crazy right?!!! So, before the launch of the ‘full batch’ in a couple-three weeks, I have a few ready-to-go...
  36. F

    Toggle between scenes 1 and 2 with 1 Switch

    Hello, In the wiki it says: "You can assign a switch to each scene, increment of decrement scenes, or toggle between scenes 1 and 2." My requirement is to have 1 IA Switch to toggle between scenes 1 and 2. Looks like some people managed to do that but was not able to find how... Can you...
  37. fox5150

    My KickTags Have Arrived!!

    Hi everyone, The postman's just been and dropped off a package with Kicktags printed on the outside! I thought I'd pop up some pictures so you can see what's what. I was previously using the labels supplied by G66 - there's nothing wrong with them, it's just that we're about to move into doing...
  38. ZenRigs Man

    FX8 Magnetic Glow-in-the-Dark labels - coming January 2016! Pics and details within...

    Hello folks! I'm really pleased and excited to be able to finally unveil the upcoming KickTags Modular Glow-in-the-Dark Magnetic Labelling System for the Fractal AX8 and FX8 boards! These will be constructed with the same materials as the latest gen MFC labels (4mm thick laser-cut acrylic)...
  39. redheadshred

    MFC-101 Setup Questions

    Hello everyone, I recently purchased a MFC-101 Mk III to use with my Axe Fx II and have some questions that perhaps go beyond the "basic" setup of it. I have watched quite a few of the popular tutorial videos and have to say, they were really very helpful, I knew how to set up the MFC with AFX...
  40. H

    Black Friday Sale?

    In the news section, M@ posted that the MFC 101 should be $100 off today- but I'm not seeing a checkout code or any indication of it being on sale in the checkout page. "Direct price" is not a sale price, right? Any help would be much appreciated!
Back
Top Bottom