fc12

  1. bassbastard

    FC12 EM interference solution

    I have been working with support on this for some time. The latest suggestion was to tear down the pedal and sand off some powder coating around the buttons so there is a better connection to chassis ground. I set aside some time in my shop this weekend to pull the FC12 apart and remove some...
  2. fannar182

    FC 12 buttons stop working

    My FC12 has been acting weird for the past week and three buttons in the bottom row (Nr.4,5,6) randomly stop working as they should. I press them but nothing happens. I then have to remove the cable from the unit and re-connect and then it works for 2-10 minutes again but then starts acting...
  3. txisan

    FS Axe Fx3 Mk1+ fc12 pedalboard in Europe 2300€

    Mint condition Never gigged Never racked Always in studio. Free smoke. Located in Spain Bought new in G66 2300 Euros + shipping costs.
  4. Vecordia

    Strange behaviour footswitch via FC12

    Hi guys, Today I got a new Boss FS-6 dual footswitch to add it to my setup. While configuring it, I came across a strange issue. I connected the FS-6 with a stereo cable (from the A/B out) into the FC-12 1/2 switch input. then I went ahead and selected the latching type at both of the FS6...
  5. Moondog Wily

    Wish Tap Tempo button color change on beat count

    I have been experimenting with my options for playing along to a click, and think a change in the tap tempo button color on beat X (or Y or Z) could be useful. I have tried IEM's (in one ear and in both ears), but I do not like being so disconnected from the sound of the room and the other...
  6. ZebulaJams

    Can the FC-6/FC-12 and or Axe FX 3 control custom samples?

    Context: Band is looking to use something to control intro/outros/other song portions in a live setting. Someone recommended using the AKAI Professional MPX8 to load samples on to an SD card and then trigger them from the pads - but I came across this thread where it looks like one of the...
  7. Shenks

    It's been a long time...

    ...since I posted on the Fractal forum, but more importantly it's been a long time until I was in a position to consider upgrading from my Axe FX II XL+ and now that time is here! A musician friend of mine has just received the Turbo and I jumped at the chance to buy his Axe FX 3 Mark I from...
  8. JasonB5232

    Access to Looper from Perform Layout

    I apologize if this has been discussed (to death) already, still trying to figure out the best way to search forums (feel free to point me in the right direction.) Plugged in the FC12 last night and I have the general idea of the Layouts, but looking for what other people have done in terms of...
  9. A

    A/B Input Switching with the Axe Fx III and FC-12

    I own both the Axe Fx III and the FC-12 foot switch, which up until recently, I only played through a guitar cable that is plugged into input 1. Then, a couple days ago, I got a great deal on a guitar wireless system, which I have now hooked up to input 2. So far, everything works great, except...
  10. C

    Expression pedal trouble

    I am desperate. My expression pedals work fine when connected directly to the rear of the Axe FX III unit (I call it then as "Pedal 1" when assigning it to modify parameters), but not when connected to the expression input of the FC-12 (in that case, I call it as "FC 1 Pedal 1" when assigning it...
  11. Dave Merrill

    WISH: Extend Channel Increment/Decrement to include Bypass

    I'd really like to have a single footswitch that cycles through channels, but also includes bypassed state. So, when set up to increment, if the block is off, pressing it goes to the lower limit channel, again increments, and when it goes past the upper limit, it goes to bypass again, cycles...
  12. J

    Would a FC12 + EV-1 fit on a 24" Pedalboard?

    Musician's Friend deal of the day is this 24" board for: https://www.musiciansfriend.com/amplifiers-effects/ultimate-support-upd-2416-b-pedalboard It seems like it might fit both, but it's very close... anyone ever tried?
  13. J

    FC-12 shared between two guitarists?

    So my band is currently using the Axe FX3 to run two guitars and a bass. Guitar 1/Input 1 Guitar 2/Input 3 Bass/input 3 The bass is straightforward and doesn't need any effects however the guitars require to switch from clean channel to distortion on a few songs and occasionally need 1 guitar...
  14. Wolfliver

    WISH - toggle scenes on hit, not release

    Hi all, it might be strange to more long time users, but I still struggle with the fact, that toggling between presets, scenes, effects and so forth happen only when the footswitch is released and not when it is pressed down. As someone, who is really more accustomed to traditional pedals with...
  15. NickSwampMKE

    Has anyone tried connecting via snake?

    Hey guys, Has anyone connected their FC via snake? Just wondering if this will work well enough(aka flawlessly)/ trying to get an idea of acceptable distances. I play the same stage every night, but the big connection box for FOH (for lack of a better term) is on the opposite side of the...
  16. A

    Assign MIDI Functions Directly to FC-12 / FC-6 Footswitches

    The ability to directly assign MIDI functions (without control switches or with additional control switches) to the footswitches of the FC-12 would be life changing (or at least gig changing). Being able to assign Note-On, Note-Off, and other messages would let the AXE III be a viable master...
  17. Conley Shepherd

    FIXED! FC FW 1.09 Major lag in calibration response on AF3 - controller taper affected?

    I am having a huge time issue with lag on the Expression pedal calibrations hooked up to the FC12. I have 2 Yamaha FC7 pedals plugged into the FC12. The FC controller/remote page, each is set for pedal 1 and pedal 2 as continuous controllers. When calibrating each pedal, both behave this...
  18. Conley Shepherd

    FC12 and MX12 - any issues?

    since the MX12 uses the midi interface for the Axe FX III, the FC12 uses the faslink cable port - Any reason to think why they would BOTH not work together? If not, need some viable explanation please.
  19. Retro Rick

    FC-6 / FC-12 Waitlist... When?

    I'm waiting for an FM3, I'm also waiting a Foot Controller, does anyone know how long that waitlist will be? When I buy my FM3 it would be nice to be offered to buy a an FC and have them shipped together, any chance of that?
  20. leslie1975

    Is my flightcase model and preset configuration possible?

    Hi all, while waiting for my FC12 to arrive i made this attached plan for a flightcase. I was wondering is this is realistic? And if the configuration is possible? Here what i'm thinkin' about: (The functionality modes switching (3 modes) is meant by using the external footswitches) Look at...
  21. orion32773

    FS For Sale FC-6

    Lightly used FC-6. $600 + shipping. Only selling as I received my FC-12 invite.
  22. P

    Need Help FC-12 with Firmware 1.06

    Hi All, I hope what I did can be reversed. I understood that there was a firmware update for the FC-12 1.06. I looked at the Fractal download section and the newest update was 1.05, which I have. So I searched Fractal Firmware 1.06 and there it was. I downloaded it and installed. The problem...
  23. Dimitri Carrer

    Price difference between FC US/EU compared to MFC-101

    Hi guys, I must say before starting that this is not meant to be as a rude/negative/flame post. I don't wanna offend anybody or sorts, just trying to figure out something that sounds a bit off to me. Lots of time has passed between Axe FX 2 and Axe FX 3 but: I've bought from G66 EU Axe Fx 2 and...
  24. plasmatic

    "MC-12"

    My temporary solution until I get an FC-12 is to use two MC6 mkii's. These are very easy to program and work great. This should easily get me by until I get an FC-12. I'm on the waitlist but I got on in 2019 so it's going to be awhile. Board is a Temple Audio Solo 18 with EV2s for expression...
  25. E

    FC "live in" case recommendations

    Would y'all mind sharing your floorboard case recommendations? I had one for my MFC101 and mission pedal but it's not wide enough for the FC12 by about 1cm. Ugh . I don't remember where I ordered it from but it's not that great anyway. Looking for your thoughts on models and where to buy...
  26. H

    FC USB Port for Axe Edit (Wish)

    I wonder if it will be possible to access Axe Edit or FracPad by plugging a PC or tablet into the FC 6/12 USB port. Since FasLink II supports bi-directional communication, this seems to be quite a feasible possibility. I’m aware that the USB port is listed as “reserved for future use,” and...
  27. H

    FC 6/12 choice: regrets?

    Has anyone purchased the FC12, and now wishes that they had purchased the FC6 instead? Or, vice-versa? I’m torn between the two, as I’d imagine some others are as well. 6 has a great footprint. 12 has all the cannons. FC owners: what is your experience?
  28. William Jordan

    FC12 :: Button Aliasing Request

    Is there a button alias feature available? Like can Layout button 5 activate the same modifier that Layout button 1 is assigned? For example Amp 1 Bypass. So, in several locations Amp 1 could be bypassed. Right now, with Axe Edit all I see is a single item modifier assignment like a button or...
Back
Top Bottom