fc-6

  1. Alec Barbee

    About to upgrade to III - best "expanded" footswitch layout?

    Hey all, I'm about to upgrade from my trusty Axe-fx II XL to the III. Having used the MFC-101 for a decade now, I'm wondering what the best option is for maximizing the amount of available controls at my feet with the FC-12. Two FC-12s feels like overkill. Has anyone ever paired the FC-12 with...
  2. V

    FC-6 Preset Function LED ring color still dim when selected by number

    Hi All, I hope someone has an answer to this. I'm not sure if it's a bug or if I have a setting that needs to be changed. I own and use both an FM3 and an Axe FX III. On my FM3, when I set the Function of the Layout to "Preset by Number", the Preset selected is Bright and the other switches...
  3. Drew Warmington

    FM9 and FC-6 Layout

    Hey everyone, I've got a custom version of the OMG9 that I created for my FM9, but I wanted to add an FC-6 to the mix as a sort of remote control when I'm at home and physically away from the FM9. I'm looking for a way to be able to jump layouts, access scene's etc from the FC-6 AND keep the...
  4. Drew Warmington

    OMG6 layout for the FC-6

    Hey everyone, I have a AXE FX III and FC-6 combo which apparently is an uncommon combo. I love the OMG series layouts, and I use Austin's version for AMP control on my FM9, but I was unable to find a layout that worked with the FC-6 only. So, here is my version of a OMG-6. It has 8...
  5. NaturalScience

    Wish Additional Option: 2nd Press Prev. Scene

    In the FC functions, would it be possible to add an option for the "2nd Press Prev. Scene" option that does the following: 1. Monitors the state of the current scene. (If this can't be done, the edited preset state may also work to some degree) 2. If the scene has not changed, then utilize the...
  6. JD_

    FM3 Switches Duplicated on FC-6

    Trying out my FC-6 with my FM3 for the first time at rehearsal tonight, and I can't seem to figure out the config. The button functions on the FM3 are duplicated on the bottom row of the FC-6. I suspect this is something simple, but I've looked through config menus, and the manuals and don't see...
  7. Burgs

    Occasional blanking FC-6 scribble strips - FM3/FC-6 OMG9

    Running 3.01 and 1.11. I haven't noticed a specific cause but I'm getting occasional blanking of FC-6 scribble strips. The buttons and LEDS seem unaffected when this happens - right colours displayed and assignments still work. But the strips go blank every now and then. A reboot fixes them again.
  8. Pedro_Santana

    Problem with FC-6 Controller and Axe-Fx 3

    I have a problem with the scenes on the FC-6 controller. Once I have set up and saved the scenes, they will be changed the next time AXE FX 3 is started, i.e. the saved scenes will be changed. Does anyone know the problem and have a solution? Thanks a lot Peter
  9. N

    Issues using FC-6 with FM-3

    Hi everyone, I just purchased an FM-3 and FC-6 controller. No matter what I do, I can’t seem to get the bottom 3 switches on the FC-6 to stop mirroring the switches on the FM-3. I accidentally cleared the stock layouts when trying to figure it out, so I can’t use that as a reference. Maybe...
  10. W

    FC-12 Text/Font looks terrible and is too small!

    I know a lot of you feel this way but it needs to be said again. The text is too small, and is just generally not good looking especially in lowercase. Can the firmware not be updated with a bolder looking text? Would this not be an extremely easy fix for Fractal to do? There seems to be...
  11. J

    Good XLR for FC-6?

    So the Faslink cables are out of stock on the Fractal site. I just picked up an FC-6 and with the basic XLR cables I have lying around it works but will disconnect if it wiggles at all. Does anyone know of a good XLR cable that will sit snug in the FC-6 until the Faslinks become available again?
  12. CodePoet

    NuX Bumblebee Pedalboard for our Fractal gear - Review

    Hey everyone - I put together a video review of the NuX Bumblebee pedalboard. I've been digging them for an all-in-one FM3/EV-2 or FC-6/EV-2 solution. In the video I walk through the fit of the FM3 and FC-6 and run-down the specs of the pedalboard. If you enjoy stuff like this, please...
  13. D

    Pedalboard does FC-6 and expression pedal

    Hi was wondering what are some good pedalboards to get for an fc-6 controller and expression pedal that is easy to carry or on wheels that keeps the pedal in place? thanks
  14. A

    Assign MIDI Functions Directly to FC-12 / FC-6 Footswitches

    The ability to directly assign MIDI functions (without control switches or with additional control switches) to the footswitches of the FC-12 would be life changing (or at least gig changing). Being able to assign Note-On, Note-Off, and other messages would let the AXE III be a viable master...
  15. J

    Momentary Switch Issues?

    On my fc-6 I'm trying to setup a momentary switch to engage a whammy sound in my per-preset layout but I cannot seem to get it to work. I had a setup exactly like this thread with the cs1 button being assigned to the fc-6 and the tap function I assigned to change the control knob in the whammy...
  16. E

    Expected LED lifetime

    The expected lifetime of the LEDs in the FC-6 are so long that I shouldn't worry about it, right? I tried searching for this information, and checked the manual, but couldn't find the answer. Hopefully this thread will pop up when the next guy wonders.
  17. drubarlow

    Flashing Lights When FC-6 Connects

    I received my FC-6 in the mail today and followed the instructions in the "quick connect guide" to get it set up, but every time I connect the XLR cable to the Faslink II port on my AxeFX3, all of the lights start blinking and it won't do anything else until I unplug the FC and reboot the unit...
  18. orion32773

    FREE Updated Live Preset 7 Scenes Friedman BE and Dirty Shirley

    FREE PRESET and FC Custom layouts. I modified my live patch in preparation for a show tomorrow and dug deep into the FC-6 to find a flow that worked well for me. This preset uses 7 scenes with the Friedman BE-100 and Dirty Shirley models. IR is from the bipolar cab pack from bipolar recto cab...
  19. H

    FC6 possible bugs

    FC6 Possible bugs 1. When revealing hold functions: screens 1,2,3 flicker when no hold function is assigned to those switches. 4,5,6 do not do this. 2. In MLM page 2, hold functions do not work on switches 1,2,4,5,6 unless there is also a hold function assigned to them on MLM page 1...
  20. H

    [fixed] FC6 Layout Link Bug?

    When I assign a layout link to the hold function of a switch, it disappears after power cycling the Axe. Layout links applied to the tap function remain as programmed. I have tried resetting the FC6 to factory setup. I am On Axe 3 firmware 5.02, and FC firmware 1.05. Any helpful suggestions?
  21. orion32773

    Axe-Fx Paid Consulting

    Might be an odd request or discussion, but I would love to hire someone that is semi local to me (Central Florida) for some general on site consulting in regards to setting things up in a permanent live environment at a church I play in. We use the x32 board with P16's and play a mixture of...
  22. Hoosierdaddy

    FC-6 and FC-12 Videos

    A SHOUT OUT !!!!!!! To those that have taken the time to do video`s on the NEW FC 6 and FC 12 `s I appreciate the sacrifice of time you took to give us the long awaited FC-6 and FC-12 video`s . I know "Read the Manual is important,,But for me and some others, "the Visual " helps so...
  23. H

    FC 6/12 choice: regrets?

    Has anyone purchased the FC12, and now wishes that they had purchased the FC6 instead? Or, vice-versa? I’m torn between the two, as I’d imagine some others are as well. 6 has a great footprint. 12 has all the cannons. FC owners: what is your experience?
  24. OddManOut

    XLR Connector for FASLINK 2?

    Now that I have my Axe-FX III I'll need to rework my venerable Vafam patch panel to accept one of the FC foot controllers. So, out with the Ethercon connector for the MFC-101 and in with the...the...XLR? Is FASLINK 2 still using a standard XLR connector? If I had to bet money, I would say yes...
  25. Denny99

    FC-6 / FC-12 Owner's Manual?

    Is there any plan to release the FC manual before both controllers are available through the waitlist? Knowing exactly what they can do (and what are their limits) could definitely help me choosing the FC-6 rather than the FC-12, to save some space and weight.
Back
Top Bottom