external control

  1. J

    Looking for help on MFC-101 controlling 2 effects bypass states

    Using an MFC-101 (Mk3) -> FASLINK -> Axe Fx II XL+, running USB to my computer but I don't think that's relevant to my question. I did a lot of research and found how to assign an IA switch to MIDI CC#16 (External Control 1) on the MFC. I have then assigned bypass mode of two blocks (Drive 1...
  2. Casimir

    Mission SP1 as a stand in switch?

    Hello all, I just bought a mission SP1, and I am trying to use the toe switch as a stand in switch to change scenes on the FM3. It turns out that the SP1 toe switch is latching, and so instead of button down = high, and button up = low, we have one press sets the value to high and the next full...
    • Casimir
    • Thread
    • expression external control fm3 mission mission engineering mission expression pedals mission sp-1 mission sp1 switches
    • Replies: 9
    • Forum: FM3 Discussion
  3. dantahoua

    Wish Scene Layout display auto change

    When using an external switch to scroll through scene (up or down), would be great to have the option for the scene layout to follow the scene. So when I switch from scene 3 to 4 for exemple, the layout on the FM3 would go to page 2 so I can see my scene 4-5-6. Same while switching from 6 to...
  4. ruin

    Toggle From Presets to Scenes with External Footswitch

    Hi All, I have a Mission Engineering TT-2 Dual Switch connected to my Pedal 1 jack with a TRS cable. My intention for this dual switch is to assign the left switch to enable/disable the Tuner. I was able to do this by going into Setup -> I/O -> Pedal, and changed "Pedal 1 Setup" to "2 SWITCHES...
  5. Eduard

    Problem with assigning EXT to L+R delay feedback

    When I assign my EV-1(EXT2) to the left and right delay feedback of my 2290 delay I can't save the preset. The feedback settings freak-out and go up and down. So only left is fine but as soon as I assign Right to the EXT2 as well then there seems to be an issue. It can't handle it. Is this a bug...
  6. CactusTone

    Control Amp "Level" for X and Y with different settings?

    Just posted this to wish list, but hoping someone had already figured this out: Is it possible to program different modifier settings for both X and Y for use with the same external pedal? For example: Amp setting X: Level Min -17dB; Level Max -13dB; controlled from Ext Control Pedal 1 Amp...
  7. A

    Patch change GR-55 ith Axe-FX

    I have a Roland GR-55 running into my Axe-FX's FX Input 2/FX Return and output a blend of the guitar tone and Roland midi tone. I would like to change both the Axe-FX patch and the GR-55 patch in changing preset on the MFC-101. I imagine that, theoretically, this is possible but am finding this...
  8. brianv4

    Bug? I'm calling it a bug...

    i first noticed this with the AX8 but now it works this way on the axefx too. if you have a parameter, let's say delay mix mapped to an expression pedal and the pedal is not connected, the delay goes to the maximum value set. So, you must have the expression pedal plugged in or bypass the...
    • brianv4
    • Thread
    • controllers expression pedal external control mfc
    • Replies: 12
    • Forum: Axe-Fx II Bugs
Back
Top Bottom