cab block

  1. dbonilla28

    Fixed VU Meter in the Preamp tab within the Cab blocks doesn't work when all the cabs are panned to the right.

    This seems to have already been discussed but it wasn't marked as a possible bug. Old thread: https://forum.fractalaudio.com/threads/cab-block-preamp-vu-meter-issue.191075/
  2. zedeloc

    Wish Preamp section for each IR slot (Dynacab)

    I would like to EQ each Dynacab mic position independently of each other, as if I were recording in a nice studio where each microphone has its own dedicated channel strip. The other preamp saturation functions might be nice too (esp on the dynamic mic choices), but I figure that could end up...
  3. G

    Dyna-cab on FM3?

    hello everyone, I wanted to know from someone, if the Dyna-cab will ever arrive on fm3? sorry for my bad english 😅
  4. 1

    A question about the FM9 CAB block, and how is the "level" control routed?

    Hello all... I'm going to try and "layout" my query as clearly as possible, so bear with me. In an effort to better learn the FM9 as best as I'm able too, I started messing with IR's and the cab block. Here is my observation, and question. If I load 1 IR into the CAB block (1:L), and...
    • 10goo
    • Thread
    • cab block fm9 ir level control signal routing behavior
    • Replies: 9
    • Forum: FM9 Discussion
  5. jrayjr

    Cab "Smoothing"

    Howdy yall, is it true that the FM3 does not have the "Smoothing" feature in the cab block? I want a FM3 as spare for my Axe and to mess with when im at friends places, but without smoohting it would be a deal breaker as i use it that much, cant live without it anymore.
  6. L

    Matchless Independence?

    New to AxeFX. Purchased, but not yet received…. In my current live rig, I use a matchless independence with matching 1x12 cab. I'm trying to match that as closely as possible. What models have folks used to get in the neighborhood?
  7. D

    Potential Cab Block issue

    Hi, When I import this perfect Delta Wav: In to the cab block, with this setting: and this layout( The parallel shunt is routed right to REW reference input and the Cab block left to the measurement input): and then measure via USB In/Out with REW Log Sweep, I should be getting a...
  8. sixtystring

    Fixed Cab Block - sometimes Align page displays more IR waveforms than it should (FW 17.01RC + Axe Edit 1.10.03)

    FW 17.01 Axe-Edit 1.10.03 Steps to recreate Load any preset Select cab block change to room/air tab change scene click back and forth between Room/Air and Align tabs (sometimes one time does it) may need to repeat steps 4 & 5 a few times As you can see below, it's displaying 4 waveforms even...
  9. danchez

    Cab Talk: What to consider when deciding between 1x12, 2x12 or 4x12 cabinets?

    Let's talk cabinets. When it comes to achieving certain tones, how do you go about figuring out whether you need to use a 1x12, 2x12 or 4x12 cabinet IR? What are each type good for? Also, are certain cab types considered "go tos" for certain sounds? (e.g. if you're going high gain, then you...
  10. M

    FM3 Low/High cut vs Preamp section Filters Low/High

    In my stock settings for the preloaded Amp patches, they are all defaulted at 20 on the low cut & 20000 on the high cut, but the preamp section shows cuts in the filter section.... sometimes 20 on the low & 10k on the high or 85 low / 11k high, etc. I guess my question is how do these 2 sections...
  11. C

    Possible Bug: Ultrares IR's Changing to Normalres

    I'm not sure if anyone has discussed (or encountered) this issue, but some of the stock IR's in the Cab Block have been changing from ultrares violet to normalres green. For example I could be jamming away on some IR's that I own that show up violet, but change cab block channels, and now York...
  12. camilovelandiamusic

    Wish Cab Block Room & Air On/Off button

    When messing with the cab block parameters for room and for air, I would find it helpful to have an on/off (engage/bypass) button for each Room and Air to hear differences. Right now you can lower percentage to 0% for off, but it would flow easier to have a bypass button to compare as oppose...
  13. Vinny

    Drive and Saturation in Cab

    I`ve been playing with these a bit lately and dig the extra warmth they can give. Anyone else utilizing these parameters? On a side note...as a natural born tweaker I can`t count the hours of practicing I`ve lost to tweaking over the last 3 years. I'll have a great gig tone wise and then think...
  14. Michael Perwira

    HELP!! Cab block selection from front panel (SOLVED)

    Been searching around about this topic, it's there any easier way to get, for example, user cab no. 471 without scrolling through from user cab no. 1-470 from the front panel? (no editor) Please AX8 i need your help
  15. orion32773

    Intro to amp modelers part 1

    This is part 1 of a 2 part series on amp modelers. Very high level but may be useful to point people to, to get them started. Correction in video “Full Range Flat Response”....I said Flat range. Duh.
    • orion32773
    • Thread
    • amp block cab block cab ir delay distortion frfr impulse response
    • Replies: 0
    • Forum: Amps and Cabs
  16. camilovelandiamusic

    AFIII AxeFX III: Mic Blending

    Hey guys! Wanted to share a video on how I blend my cab IR’s. Also mentioning all the parameters... how the preamps work, etc! Sorry its long haha.
  17. camilovelandiamusic

    Wish Amp Cab Negative Proximity

    I like how increasing the Proximity in the cab block brings more more low end to a specific IR. It would be cool if you could also subtract proximity and have that act kind of like a high pass filter that at -10.00, for example, would be completely cutting out lows and mids. This would be a...
  18. ML SOUND LAB

    Axe-Fx III Tutorial - Mixing IR's within the unit

    So I got a request from @bvaughn0402 that I explain how you can mix IR's within the unit with the Axe-Fx III. As you may have guessed already by looking at the IR options "it almost seems like I knew that there would be 4 IR slots in the Cab Block" and that's correct. You will find samples from...
  19. Moke

    Wish Selectable 'Serial/Parallel' switch in the cab block (like Cab-Lab)

    I don't know how many others would possibly use this? But I often like to use the 'Tone Match' block as an adjustable 'Corrective EQ' after the cab block. The 'Tone Match' could be exported as an IR, then loaded into one of the unused locations in the cab block that was used during the match...
  20. camilovelandiamusic

    Axe FX III The New Cab Block

    Hey guys!! Wanted to do a little overview of the cab block and its new features! Hope you dig!!
  21. S

    Cab packs methodology

    So, I've bought a couple of cab packs, like most of you good people, and I was just wondering how some of you manage all the options that come with them ; some packs have huge amounts of mic iterations. I've picked some cabs that I like, but to be honest, I feel like my choices were guided by...
  22. rascarvalho

    Using Cab Block and Real Guitar Cab + tube power amp at the same time

    Hey dudes, I´d like to hear you how do you deal with this situation: I use AFX as my principal gear but I use a tube power amp (mesa 20/20) and a real 2x12 cab loaded with celestion V30. Sometimes I'm not able to take my cab with me, so I just take my AFX and use the amp that I find on the...
  23. A

    Axe FX II Mark2 high pitched noise from the unit [NOT A BUG]

    Hi. I just recently bought Axe-Fx 2 Mark 2 second hand. It was like new, still had the sticker on LCD. I've noticed after, that it's making high pitched squeel from the unit itself, not speakers. Even without all the leads plugged in. I've discovered that it is caused by cab/ tone matching...
Back
Top Bottom