Search results for query: *

  • Users: Hansen
  • Content: Threads
  • Order by date
  1. H

    Dry signal recording possible with AX8?

    Has any of you recorded dry signal directly from the AX8 and if so, how is the quality of that dry signal and is it good enought for professional album recordings?
  2. H

    Please help! AX8 stuck at preset, gig tomorrow

    I am having trouble switching presets. I just tried a new acoustic simulator preset. It works well, but once I have selected it I can only change if I hit F1. I cannot switch the normal way by not having F1 active and the presets blinking. I have not had this problem with any preset before...
  3. H

    Anybody who has made a piezo clean sound preset on the AX8?

    Are there any ways to create a piezo clean sound preset on the AX8, without having a piezo pickup on the guitar itself?
  4. H

    How to open my old AX II presets in Axe Edit, without connecting the Axe II?

    I used to own the Axe II, until I sold it and bought the AX8. I would like to open some of my old Axe II presets to see what amps, etc I used. However, it seems I cannot open these in Axe Edit without having the Axe II connected (which I have sold). And I cannot open them in AX8 either. Is there...
  5. H

    How to record dry and wet signal simultaneously with AX8

    I want to record a wet and dry signal at the same time with my AX8. In the past I used the Axe II and I used it as an audio interface as well. If I am not mistaken, I got the wet and dry signal from output 1 L and R, or perhaps it was output 1 L and output 2 L. I cannot remember exactly, but it...
  6. H

    Short question about scenes mode

    I have not used this a lot so far and to my understanding it is better for preset switching when you use the same amps/cabs in the scenes. I have a preset with two scenes, the only difference between the scenes is that one turns off the drive block and turns on the delay. I get a big "buff" when...
  7. H

    Does your band run mono or stereo guitars live?

    I play in a metal band with two guitarists. One with Kemper and myself with AX8. I play 60-70% rhythm guitar, while the other guy also plays a lot of rhythm and a lot of leads. I think we would have more power and a bigger sound if we both run stereo live. That way we could have rhythm guitars...
  8. H

    Question about control switches

    I have a preset with drive engaged and delay off. When I hit the control switch I want to turn on the delay, but turn off the drive. I have set both to be controlled by control switch 1. However, I am only able to make both either on or off. I want the opposite, I want the drive to go off and...
  9. H

    Do most people not use proximity anymore?

    There are so many updates and changes on the Axe products that it is hard to keep track of everything. I have had the same presets for a while. I trying out different cab settings and noticed that when I turned off the proximity in the cabs, a lot of "hum" disappeared. Am I correct that it is...
  10. H

    How to test sounds in the most convenient way?

    What would I need to do in order to put a loop and test presets, cabs, etc by just tweaking in the AX8 editor? I do not want to play while I test different sounds. Is there a way to achieve this?
  11. H

    Dry signal recording possible with AX8?

    I own both an Axe II and AX8. For our recordings I always recorded wet and dry signals at the same time with the Axe II and used it as my Audio Interface. I was told that it has really good converters and that the dry signal will be of high quality. I am considering selling my Axe II now. Will I...
  12. H

    How do you pan stereo cabs in your rhytm presets?

    Is +/- 20 the normal and recommended way to pan cabs if you run stereo live?
  13. H

    How can I control delay X/Y with the footswitch?

    On my Axe FX II I have an Y setting on the delay block that causes it to become eternal. On my MFC I would just hit the footswitch to activate the Y setting of the delay block. However, looking in AX8 and on the footswitches page I cannot find any option to select Delay X/Y as a footswitch. Is...
  14. H

    Any drawback with putting the cab at the end of the signal chain?

    The reason why I am asking is that I run 2 signal chains in all of my presets: 1. To FOH 2. Without cab simulation to a power amp In the past I have always put the cab right after the amp with blocks such as PEQ, Vol/Pan, Reverb, delay, etc after the cab. I just looked at page 17 in the AX8...
  15. H

    How to fix AX8 audio gaps when changing presets?

    I just got my AX8 and the audio gaps when changing presets seems bigger than with my Axe II. Perhaps I am wrong. Anyway, I am mainly using a distorted tone, a clean and a lead and they all got different amps and cabs. Is the best way to solve this to have scenes and that every preset has the...
  16. H

    Question about Global EQ settings

    I wanna cut the top on all my presets. I have the 16k all the way down. The next one is 8k. Is there nothing in between? Let's say I would like to cut everything above 12k on all presets; is that not possible on global EQ?
  17. H

    Question about stereo vs mono effects live

    I run my AX8 presets with stereo cabs and most effects in stereo. I play in a band with two guitarists and we do not have a permanent sound guy. So I guess most sound technicians just pan one guitars to each side in the FOH. Could that cause any trouble for my stereo effects and stereo cabs or...
  18. H

    Powerbank recommendations for pedalboard?

    I have a Templeboard Trio 28 and want to buy a powerbank. The board has AX8, an exp and the Line 6 Relay G70. Any recommendations for a suitable powerbank? Looking for something solid which does not take up too much space.
  19. H

    Any PRA WiC wireless users?

    Anybody who has live experiences with this system from PRA and can say whether it is better than e.g. Line 6 Relay?
  20. H

    Any Line 6 Relay G75 users here?

    I am looking for a wireless to put on my pedalboard and I wanna go with Line 6 Relay. I am aware that G75 is designed to be on the top of the amp, however it is offered at a great discount in a shop close to me now. Would it also work to put this on a pedalboard?
  21. H

    Any small wireless systems?

    Does anybody know whether there exists a wireless system similar to the Line 6 Relay G10, where you just plug a transmitter into your guitar, but where also the receiver is so small that it can be plugged directly into the input on the Axe instead of being an extra box mounted on the pedalboard?
  22. H

    Which Line 6 Relay do you use with the AX8?

    So this is obviously only for the people who use Line 6 Relay with their AX8. I have used G90 with my Axe II and have decided to stick with Relay as I already have the transmitter. A few questions: 1. Can I use my G90 Transmitter for the Relay G10, G30, G50 or G70? 2. Which is your preferred...
  23. H

    Do you use AX8 with our without a pedalboard?

    If you use a pedalboard, could you tell me which one? Would also be glad if people can post pics of their gear!
  24. H

    Should I use humbuster cable or XLR when connecting to FOH?

    I have always used an XLR in stereo. Would humbuster cables be an even better option?
  25. H

    How to avoid scenes mode on banks

    I just got my AX8 and it seems to be set in scenes mode, hence to change a preset I first need to hit F1 and then the number of the preset. Is if possible to change this so I can change presets directly without hitting F1 first? Also, is if possible to have different setups for different banks...
  26. H

    Input level clips and turns red, but VU level is ok. How to solve?

    On one of my E-bow presets the input clips red, but the VU meter is ok. What parameters should I adjust to not distort the VU-meter and not to affect the input level for other presets where I am not using the E-bow? I guess the E-bow is a lot stronger in the attack than a normal pick. Anyway, I...
  27. H

    How to set the VU meter?

    I have adjusted all my presets so that they are inline with the VU-meter. If I would like to make some adjustments, e.g. have some of the presets lower in volume, how should I go about that without changing the level on the VU meter so they still hit the mark there?
  28. H

    How to use one reverb block for two chains? Ok to put before cab block?

    In all my presets I run two chains: 1. One to FOH with cab block 2. One to power amp without cab block. Note that I am only running into the return of the power amp, not adding any distorition, etc. I have quite a few presets with two reverb blocks, but I notice that it is only possible to have...
  29. H

    Can the AX8 be used as a footboard for the AXE II?

    Perhaps a stupid question, but can it be used as a "MFC" for the Axe II? I was unlucky by error connected my USB into my MFC connection in the back, so the connection is broker. I will most likely only use my AX8 live anyway, so I think I will not fix the connection. Anyway, that is why I...
  30. H

    Can I only use AX8 in Fractal Bot with MIDI?

    With Axe FX II I can connect via USB. I have connected the AX8 via USB, but I only get the option to connect via MIDI. Can I not use Fractal Bot with AX8 via USB?
  31. H

    How to record wet and dry guitar at once using RME interface?

    I struggle to record wet and dry guitar signal at once. Previously I used the Axe FX II for my guitar recordings. Before I bought RME UFX II I recorded wet and dry tracks at the same time by simply using my AXE FX II as an Audio interface and connecting via USB. I am now running RME as my AI and...
  32. H

    Using the Axe as an AI - What buffer size to use?

    If I use the Axe as AI and record guitar in Cubase, should I set the buffer size in I/O as low as possible, e.g. 0?
  33. H

    Anybody who uses compressor with their high gain settings?

    I just saw this video This guy uses compressor together with his noise gate for tight high gain presets. Anybody who uses compressor here and where do you put it in the chain?
  34. H

    Where should the noise gate be placed?

    I am wondering where I should place my noise gate for high gaing settings. Currently I have it between the amp and the cab. I just checked out Periphery's bulb preset from the Axe change site and they both have a noise gate in the IN/gate plus they have a noise gate block. This noise gate is...
  35. H

    The most convenient wireless system to use with the AX8?

    Has anybody recommendations for wireless systems that goes well with the AX8, e.g. that fit together with the AX8 on a pedalboard of something? I like the idea of just using the AX8 and an EXP, but I would prefer staying wireless.
  36. H

    AX8 vs Helix

    Anybody who has view on the sound differences between these two? I have used Axe for years and I am very happy with the unit.
  37. H

    Anybody who uses Axe FX II with in-ear?

    My band is considering in-ear as a live solution. I am using Axe FX II and running directly to the FOH. Sometimes I have experienced that people at the first rows cannot hear my guitar from the FOH because they basically only have stage sound. This obviously differs from venue to venue.. For...
  38. H

    Should I send my Axe FX II through my RME Daw or not?

    When recording in Cubase I have usually used my Axe FX II as Audio interface and had projects in 48 khz. I have recorded wet and dry tracks simountaneously with my Axe. When recording vocals in the same project I have used my old Audio interface and switched the khz to 44,1. I have recently...
  39. H

    AX8 vs Axe FX II pros and cons live use

    I currently own an Axe FX II. I am very happy with the unit. Could someone please provide a list of the pros and cons with using the AX8 live vs the Axe FX II? I appreciate the idea of having to bring less gear, however as I use the Axe FX II at home as a sound system, I guess I would still...
  40. H

    Can the Axe FX be used as a tool for electronic music?

    Has anybody experienced with using the Axe FX for making electronic music. In that case, what presets and sounds have you used? Is it possible to also create a synth preset, send MIDI through it and use it as a sample?
  41. H

    Using Axe FX 2 as a Sound Card, can it affect the sound?

    *Seems I cannot edit the topic. I mean sound card, not DAW When I am listening to music on my computer I use the Axe FX as a sound card. My question is, can the Axe FX settings affect the sound somehow? When I am listening it seems a gate is kicking in sometimes.. 1. Will the preset that is...
  42. H

    Digital noise when recording bass via the Axe FX II

    I have used the Axe FX II to record guitars many times and never had any problems with digital noise. Last weekend the bassplayer in my band recorded bass through the Axe. We experienced a low, but significant digital noise. The bass player uses a bass with active EMG-pickups and I believe that...
  43. H

    Bass preset for metal?

    I have used the Axe FX for years and I am very satisfied with it. However, I have never used it for metal before. I am going to record some bass for a metal band and I wonder whether anybody could give me some tips on settings for good amp presets? Amps, drive pedals and other settings. Any...
  44. H

    Any good bass presets?

    I just bought myself my first bass but do not own any bass amp. I have heard the Axe FX works ok with basses too. Could anybody upload a good preset to use with the Axe FX 2?
  45. H

    Opeth live gear

    Watched Opeth recently. I could not see any Axe FX on stage.. Perhaps they were hidden? Anyway, their sound was great as always. I could see mission pedals and Vodoo labs pedal boards. It also seems to me that they are using piezo pickups on their acoustic parts? Anybody who knows if they are...
  46. H

    Which noise gate to use?

    It is possible to insert a noise gate as a block in the layout, however there is also a noise get one the IN (first block) of the layout. Does this mean we should primarily use that gate if we need noise gate or do people insert it as a separate block instead?
  47. H

    Fractal Audio flexible sample rate conversion?

    Is it possible to adjust the sample rate from 48 to e.g. 44.1, or does anybody expect this option to come in the future?
  48. H

    What cables do you use for your expression pedals?

    Any specific cables you recommend or would a normal jack cable suffice?
  49. H

    Quality of dry signal recording with Axe FX?

    A little background first.. I play in a band and we are about to record our fourth album. We are a professional band to that extent that we have quite a big following and we have been signed since 2005. So the production of our album will be done as professionally as possible. My question is...
  50. H

    Trouble listening to my Axe FX II via headphones

    I plug in my headphones with mini jack on the front but get a weird sound. I guess it has to do something with the I/O settings. What should I adjust so that I can head cubase and play through headphones via the Axe FX? I am using it as my sound card.
  51. H

    Axe FX II not registered in Cubase

    I have used Axe FX in Cubase for years and never had a problem. When I opened Cubase last time I opened it before I had turned on the Axe FX, hence I got a message and I think I clicked on the wrong option and kind of disabled the Axe FX. Usually I solve this by going to Devices - Device Setup -...
  52. H

    What is your favorite delay model?

    What is your favorite delay model on the Axe? I have used the 2290 w/mod quite a lot. Anybody else who likes that one?
  53. H

    Common delay settings for lead sounds?

    Just wanted to get some tips on delay settings on lead sounds. When I scroll through the various delay models, I noticed that the feedback is at 100% on all. Should I leave it at 100%, and intstead lower the mix if I want less effect? What are common settings for mix and time?
  54. H

    Isis/Neurosis preset (post metal)?

    Anyone succeeded making a heavy preset sound similar to the heavy gain sound of post metal bands such as Isis, Neurosis, etc? It's not a typicalk metal sound, but more vintage, overdrive based, Big Muff-ish, type of sound.
  55. H

    Reverb or delay on high gain rhythm guitar preset?

    delete thread delete thread
  56. H

    Issue with clip after firmwire upgrade

    After upgrading to the latest firmwire I have issues with clipping on one preset, something I have never experienced before I did the last update. I only get clipping on my heavy preset, which does not really have that much gain. When I look at Utility - Status, I'm around 70%. So I find it...
  57. H

    Problems updating MFC, please help!

    I was not able to update to the last version. This is the first time I have had trouble with an update. MFC connected via Midi to the Axe. When the midi buffer was set at 150 my update stopped at 21%. I tried Fractal Audio’s advice of lowering it to 90, however then nothing happened...
  58. H

    How to use an octave pedal to create a down-tuned effect?

    I am trying to create a sound that mimics the sound of a 7-string or downtuned guitar. Basically, I want to use my distorted sound as it is and have the whole guitar tuned down several tones to create a kind of “djent” sound. I do not intend to use this sound as my main guitar sound, but on...
  59. H

    I/A switch MFC question - Can I assign a switch to two blocks at once?

    In all my presets I have two chains; one to the FOH and one to my amp (in case I use it). So that means I have 2 drives, 2 delays, 2 amps, etc.. I have one switch set to change the delay from X to Y settings. I would like to know whether I can assign the same switch change the X/Y on both delay...
  60. H

    Trouble recording in Cubase (low signal)

    I am recording in Cubase and my problem is that the recorded signal turns out very low. I have a pretty high volume from the speakers and experimented with turning up the Input 1 (I/O - Input). Still the signal is very low. I am able to turn up the wet volume by increasing master volume in the...
  61. H

    Misha's recording tips with the Axe-Fx II

    Guitar Recording Tips - Misha Mansoor - YouTube Nice video. Could someone please explain why he is using the focusrite as interface and not going directly from the Axe to the computer? Based on what I thought, the Axe is a good interface in itself and has very good converters. Does the...
  62. H

    Softrack suggestions for the Axe FX2?

    I am looking for a softrack 3U which is small enough to bring on board flights. Hence, the rack can't be too deep and Im looking for a kind of shallow rack. Ideally also wheels, but no must. Currently using Rockbag Shallow rack 3HE by Warwick. Rockbag - 19" Shallow Rack Bag 3 HE RB 24310 B ...
  63. H

    Is it common to use reverb on high gain presets?

    I am watching this seminar by Scott Peterson and he says he always uses reverb in his presets, to avoid them sounding flat. However, just a touch he says. ("If you don't have reverb it will always sound flat") Scott Peterson - "Taming the Monster" - Axe Fest West Coast 2012 - YouTube (07:32)...
  64. H

    High profile guitarists using the Axe?

    I notice many famous rock/metal guitarists that are now using the Axe. Probably an easy choice for many of them. But do people know about many more vintage style players (blues, jazz, etc) that have switched their old amps, twins, etc with the Axe?
  65. H

    Anybody knows about good Fender twin presets/tonematches?

    Looking for a sound similar to the one at 04:10 here: Fender Guitars Presents-Johnny Marr-Twin Reverb - YouTube
  66. H

    Problems changing preset to use X/Y instead of EXP

    Problems changing preset to use X/Y delay instead of changing via EXP I have a preset that I use with my E-bow. When I change to another preset and go back to using the pick I use my second EXP pedal (1st is for volume) to put mstr feedback and mix to max + put repeat hold on. This makes the...
  67. H

    Problem uploading presets with Fractal Bot

    The first time I do it everything works fine, however when I try to upload a second preset I get an error message. The solution is simply to turn the Axe off and on again, but it's annoying.. Anybody knows whats wrong?
  68. H

    How do you pan your cabs in presets?

    I guess it depends on the presets and whether you are two or only one guitarist in the band. Anyway, do most people run stereo cabs and have both panned to centre? Would it e.g. not be ideal for the FOH if you run different pan settings for the various presets if you play with another guitarist?
  69. H

    Short question about copy out1 --> out2 option

    I run dual chains, with one chain to the FOH and one to output 2 (amp). However, if I don't use an amp on stage, is it possible for me to turn on copy out1 --> out2 and will that overrun/block the chain in the preset that is already going to output 2?
  70. H

    Question about I/A switch

    I run dual chains in all my presets, 1 to FOH and 2 to amp (if used). I just created a volume boost using a Filter. I activate it through the I/A switch on the MFC. My question is whether I can program the I/A switch to turn on Filter 1 and Filter 2 at the same time, or do I need to use two...
  71. H

    Anyway to activate a metronome with the Axe FX?

    Is it possible to set up a block that acts like a meteronome?
  72. H

    Anyone dialled in a Neurosis/Isis sound?

    I guess this might be a bit more challenging as it is a heavy kind of overdriven sound. I am not quite sure but I think one of the guitarists uses an ampeq top with guitar pedals going into it. They have a very heavy sound, but not like the typical metal distortion. It's mostly suitable for...
  73. H

    Question about tempo in Looper

    I recorded a riff with the looper. I thought that I could tap the tempo, in order to change the speed of the riff, however when I tap it the tempo stays the same. How do I use the tempo correctly? I am using the MFC to do this btw (button 5) as shown here...
  74. H

    Question about the Looper

    I am wondering whether it is possible to loop sounds from presets and to keep the loop whilst changing to a different preset? E.g. playing a riff with preset 1, looping it, then changing to preset to and still hearing the looped riff from preset 1?
  75. H

    Need help to create a preset with feedback controlled via an EXP

    I have an preset for E-Bow which I use for atmospheric parts. Sometimes I use E-Bow + slide and I think it would be cool to mix those atmospheric tones with some kind of feedback/noise. The idea I have in mind is that the feedback is controlled via and Exp, so that I can blend the feedback in...
  76. H

    Possible to store global EQ-settings?

    I did not find any information about this. I have used the Axe with many different cabs, and usually do a quick "correction" in the out2 global EQ. Is it possible to save these EQ settings?
  77. H

    How to increase sustain on lead tones?

    Which blocks or settings do you like to use in order to increase the sustain on your lead tones?
  78. H

    Running cabs in parallell vs stereo cab?

    What is the main difference and what do you choose? In theory, should two cabs (both in hi res) in parallell yield better results, although use more CPU? I am reading the Axe wiki, and just came across this issue. Have only used stereo cabs so far.
  79. H

    Mimic

    How are you guys finding this feature? I recorded a small piece in Cubase, which I am looping now. Using a high-gain presets. To be honest, I think it's very hard to hear any difference. What are your experiences so far.. You leave it on or off?
  80. H

    Can someone please explain ghost notes and the B+ settings

    What are ghost notes exactly? Also, do any of you experiment with the B+ settings?
  81. H

    Back from European tour using the Axe FX 2

    Just came back from a tour playing for the Norwegian metalbands In Vain and Solefald. The gigs on this tour were my first real try-out of the Axe, MFC and two Mission EXP pedals on various FOH's, scenes, with different monitors, etc. The Axe worked perfect on every show and the sound guy was...
  82. H

    How to bypass VOL controlled by expression pedals when playing without

    Often I am just playing with my axe, and not having the MFC and expression pedals attached. All my presets have VOL controlled by expression pedals, and when they are not connected I have no sound. This can be fixed by undoing the modifier in the presets. However, is there a general setting...
  83. H

    Is there an easy way to make scenes presets?

    I am currently using 5 presets and I would like to adjust them so that I can use scenes. My question is, what is the most easy way to do this? E.g. can I copy preset 2 into scene 2 on preset 1 or do I have to do it all manually? I guess the best then is to take photos with my iPhone.. Any...
  84. H

    Problems with peak volume using E-bow

    The E-bow gives quite a strong vibration on the string and I guess the IN-signal is to loud. I have turned down level a lot on the amp, but the out signal is still too high. Is there any other way I can correct this? Other solution is to keep the E-bow a bit away from the pickup...
  85. H

    Need inputs on my noise gate settings for high gain presets

    I do not have much experience with noise gates, so I got some guiding from a friend who plays in a djent band. He says if you want to use a gate, you might as well make it sound really tight. I am playing quite complicated metal so I need a tight gate. Anyway, he suggested this: Threshold: -65...
  86. H

    Noise gates on dual chains

    I am running dual chains, one to FOH and one to FW Loop. The chain for FX loop is just in case I need extra stage sound. That way I can easily connect to a cab. But I won't mic the cab, but go straight to FOH. For my chain to the FOH I have a gate at the start and at the end of the chain (high...
  87. H

    Master volume on high gain amps?

    Yek writes in his excellent "Yeks Hos Tos" http://wiki.fractalaudio.com/index.php?title=Yeks_How_Tos: " If the modeled amp type is a modern high-gain amp, it probably relies on preamp distortion instead of poweramp saturation. In this case, keep the Master Volume control low (for example 3.50...
  88. H

    Which gate should be used?

    Do you use the gate that is on the layout menu of the grid or do you insert a gate in the chain? Is the gate in the layout menu the same as putting a gate at the start of the chain?
  89. H

    Where do I find MFC101 labels?

    I've seen several MFC-101 which have labels for various effects. Where did you get these?
  90. H

    How to modify "eternal" delay on effect via expression pedal?

    On some songs I am using E-bow on a preset with lots of delay and reverb. In one song I have to switch back to plectre and my distorted sound. Obviously this takes a bit time when Im going from the E-bow to the plectre. When I used the POD Xt live I think I turn the feedback up to 100% and the...
  91. H

    PRoblems with reverb effects when running through FX return on amp

    For all my presets I have made dual chains (as on page 23 in the manual); one to the FOH and the other to FX Loop/return on my amp. When I tried my presets recently I connected output 1 L and R to FOH. I used output 2 L to the return on my amp. The presets sounded great from the FOH, except some...
  92. H

    Tips on using two cabs with the axe

    When using two cabs should I set mode to stereo and then pan the two cabs to centre because I am running mono live? Or should I split the chain into two seperate cab blocks? I am running mono.
  93. H

    Overview of amp models?

    Anywhere I can find an updated list with the different amp models in the Axe? The manual does not contain all of them..
  94. H

    Trouble when connecting MFC-01 to AXE 2

    I am not able to get electricity in my MFC01 from my Axe FX 2. I am using a CAT5-cable. Tonight I was at a friend's place. He has an Axe FX Mark 2 and we were able to turn on my pedalboard with his Axe Fx Mark 2. We also updated to the newest firmwire. Now I'm back at my home using the same...
  95. H

    Preset with dual chains - for cab and FOH

    I plan to make dual chain for all my presets (se page 22 in the manual). In the case i have a bad monitor live I will just connect output 2 to the return of a power amp and use the cab for extra stage sound. So, if I have a preset with dual chains, one to the cab and one to the FOH, but do NOT...
  96. H

    Preset with tonematch

    I have made a preset using tonematch. If I am running through a cab live and turn off cab simulation, will this also turn off tonematch? Or should I not disable the tonematch block when running through an amp?
  97. H

    Suggestions for softrack with room for Axe 2, MFC-01 and pedals?

    Has anybody found a convenient solution for a rack that has room for the axe, MFC01 and two pedals? Preferably one that is possible to bring as hand luggage on a flight.
  98. H

    Trouble recording with the Axe 2 in Cubase

    The weird thing is that I have managed to record with the Axe in Cubase before. It's been a while and now I can't get anything recorded. 1. I have set Axe FX as sound device in device setup 2. Added two inputs in VST connections and one stereo output 3. Added two mono tracks. On the...
  99. H

    Do you use tonematch or regular tweaking to make sounds?

    Seems to me that tonematch is a very quick way to make sounds, if you know an artist with a similar sound to what you are looking for. Since it is working so well, do you guys use to make new presets instead of tweaking a preset from scratch?
  100. H

    Which parameter in the Axe 2 will correspond to the effect of an exciter pedal?

    Before I bought the Axe 2 I used POD xt together with an Aphex Exciter pedal Aphex 1403 Guitar Xciter | Guitar Other Effects at zZounds This pedal really made a difference to my tone. Without it the POD sounded good, but with it it sounded very good. Anyway, I am curious, which...
Back
Top Bottom