Search results for query: *

  • Users: Woland
  • Content: Threads
  • Order by date
  1. W

    Pitch Shifter on Ax8

    Hi, Coming from the AxeFx II to the Ax8, I noticed that the pitch shifter is quite bad. Tracking is buggy and there are a lot of artifacts... It's just me?
  2. W

    Fracture Variation

    Hi, A short clip of Fracture Variation by Robert Fripp. Rick Toone custom > AX8 > NS10 Unfortunately I didn't record the direct signal Hope you'll enjoy
  3. W

    Envelope Filter Lead Tone

    Hello, Any way to achieve the same filtering effect you see after 3.20? I've looked around the forum but I didn't find anything like this Thanks!
  4. W

    Infinity Looper + AX8

    Hello, I have problems patching external processors in the FX Loop. I'm trying with the Infinity Looper and I'm probably doing something wrong. Basically, the output from the looper (pre-recorded stuff) works perfectly, but the input (fx send) is almost inaudible, so I can record anything I...
  5. W

    Troubles with Eventide Eclipse into Loop

    Hello, For some reason I don't have stereo (using 4 cables, of course). Someone has ever tried to connect it? Thanks
  6. W

    Two Pitch Shifting blocks

    Ambient patches don't always require amp+cab, so it would be great if the processing power could be routed to a secondary pitch block...
  7. W

    Problem with Axe Edit and AX8

    Hello, My AX8 arrived this morning... I've uploaded the recommended new firmware and everything went smooth as usual (it's my 4th fractal product), however I can't connect it on Axe Edit. A pop up advise me that: the connected device is not compatible with axe-edit version 3.07.02 How can I...
  8. W

    Some video recordings

    Here they are, Hope you enjoy ;)
  9. W

    Acoustic Patch

    Hello, Here's a short clip direct to the computer via USB. Pickup is a LR Baggs Lyric. I often find more natural just the parametric EQ and reverb than any guitar body IR, which is more effective with a piezo sound, probably. In this case I used the preamp saturation from the cab block too...
  10. W

    Lunar Rainbow

    Thanks to M@tt for this beautiful patch. I've tweaked just a little bit to accomodate my taste and guitar.
  11. W

    Should I buy the AX8?

    Hello, I own an AXEFX II (first model) + MFC 101, and I love it. I would like however to have something more compact to carry and use it for my acoustic too. My sounds are quite simple: a clean sound with no preamp, just an Avalon U5 IR, and a dumblesque overdrive tone, but I generally use a...
  12. W

    Double input & output

    Hello All, I would begin in June an acoustic tour. It's a duo project and I would like to plug both guitars in the Ax FX II, have separate fx chain for each instrument, and gave the sound guy the separate output of the guitars. I'm not sure, but think it could be possible using efx loop, isn't...
  13. W

    World Clock FW18

    Hello, I didn't installed the new firmware yet. I'm happy everything will sound even better, but the best feature for me is the new world clock. So, I just want a confirmation: If I'll upgrade to FW18, I'll be able to use my Spdif outs/in into my MOTU and there will be a menu somewhere that...
  14. W

    Short video

    I made a short song with my custom guitar and I would like to share it. I hope you'll like it. I'm an heavy AxeFx user since the beginning, and for those clips I just went direct... oops- ;) I'll do one using the Axe Fx soon, promise ! https://www.youtube.com/watch?v=hLV8SfamWDU
  15. W

    Looking for info on this amp

    I remember few thing about it: 1) I think it was called G System (nothing to do with TC) 2) I had multiband compression 3) Single 15" speaker with custom 250 Ohm load (?) 4) I believe it was made by tube tech 5) Endorsed by Joe Walsh (??) 6) It was grey Anyone remember it? I believe...
  16. W

    MFC 101 Tuner

    Hello I have the MFC 101 mark I, and while the tuner on the AxeFXII's screen is accurate (thanks especially to the ball) the tuner on the MFC is slow and very approximative… to the point I have to relay to a peterson clip tuner. Anyone is experiencing the same thing? I don't know exactly what...
  17. W

    A final word to digital output/clock

    Hi, I play live with my axefx into a motu 828mkIII and ableton live. In order to make more room in the audio card for other instruments, I would like to use the spdf connection and free two analog xrls. Now, the only problem is that it seems the axefx could only be slave, which is not...
  18. W

    Expression Pedal problem

    Hi, I've connected three expression pedals on my MFC 101. One is connected as master volume, the other two as expression. The problem is that if it doesn't see the second expression. I tested the pedals, and they work fine. Do you have any ideas? Thanks f
  19. W

    Crystals Tail delay

    Hello, I have a patch in which I'll have to switch from clean + tremolo to clean + crystals. Every time I switch, the tails from the pitch shifter kicks in, delaying my what I was playing just before. Is there a way to avoid that? Thanks!
  20. W

    Hi Fi pickups

    Hello, I'm looking for a really hi-fi (think Tuck Andress tone) pair of pickups for my custom 6 string guitar, tuned in fifths (low C). I've currently a set of QTuners 2.0 but they are totally different than the previous ones, and they are not making a huge difference. Lace Alumitones, maybe...
  21. W

    Adding a Scene switch

    I've currently set my MFC 101 with 10 presets and 4 scenes on the top rows (11-12-13-14) I would like to add a fifth scene on 15 button, but I completely forgot how I made it the first time! I've checked the forum but I didn't find how… I'm sure is not so complicated, can somebody help me...
  22. W

    Clean channel Avalon

    Hello, I'm working with a very peculiar instrument, with an aluminum neck and the QTuner Pickups 2.0 Since I'll post a video soon showcasing both, I want to build a clean patch with a unique sound as well. My aim is to have a very hi-fi, balanced tone (think a Millennia or Neve Amp straight...
  23. W

    Prime Numbers Delay

    Hello, I'm programming the patches for my next tour, and I've a little problem. On a song, I've used in studio a ping pong delay from SoundToys, with 1/4 dot on the left side and 1/4 whole on the right side. Zero feedback and 100% wet. Now, that special time subdivision is generated because the...
  24. W

    AXE FX II Output

    Dear All, Since I use no more than 5 or 6 preset, I'm gonna do two different banks with the same sounds: one for analog output (with levels set to -18/-16 db) and one for the digital output. Before doing so, I would like to know if the master output knob is in truth a digital trim or is it...
  25. W

    An exact Dumble sim

    It's one of my favorite amp for lead sound. On the previous FW, I knew that it was modeled with drive at 7, so it was suggested to set imput trim at 7 and master at 3 (not sure about this one). With the new update we have a new dedicated imput drive, where I would set imput trim? Should I go...
  26. W

    Imogen heep vocoder sound

    Hello, I'm working on a vocoder patch that could mimic the effect (I think it was a digitech harmonizer) used on "Hyde and Seek". I have problems with intelligibility of the speech. Do you have some suggestions? Thanks
  27. W

    Configuration for my MFC -help needed-

    Hello, I have the Axe II & MFC pedalboard. I would like to configure it like this: 1-10 for preset selection (done) 11 Looper rec (it will be already active in the patch) 12 (or 11 again) stack 13 undo 14 once 15 Scene change 16 tuner on 17 tap I was able (thanks to the forum)...
  28. W

    NIN tone

    Hello, I'm looking for a synth-like industrial tone, like the kind NIN uses. I've already achieved good results with no speaker cab, tone matching and some bit crushing, but it's lacking the synth quality. Even if heavily equalized, it doesn't sit in the mix well. Somebody has a preset to...
  29. W

    FW 9.1 + MCF + Axe Edit

    Hello, I got the clear message to stay away from axe edit if you wanna use the new firmware. This means that I have to choose something like Midi Ox for installing the firmware too, isn't? I have a Mac Book Pro with Lion, Axe II with 8.0 and MCF pedal. Thanks!
  30. W

    Big problem! Pls help me

    I've just finished the last concert of this tour leg, the next one will be on 31st.. During the last song i've pushed the wrong buttons in my fractal pedal board... And i've pushed many more trying to recovery: now it doesn't show the name preset and sometimes the message : "name time out" or...
  31. W

    "Fugal" Patch

    Hello, I've tried to build something like the fugal preset Matt did in this post http://forum.fractalaudio.com/axe-fx-ii-discussion/52997-double-tracking-fat-live-sound-any-new-ideas.html but is with no success... could somebody explain the architecture of the preset? Thanks!
  32. W

    MFC CC without IA

    Hello, I've spent hours searching but I wasn't able to find a solution for my "problem". I have the Axe II & MFC pedalboard. I would like to configure it like this: 1-10 for preset selection (done) 11 Looper rec (it will be already active in the patch) 12 (or 11 again) stack 13 reverse...
  33. W

    Tone Matching studio gear

    Hello All, Did somebody tone-matched a Neve/Millennia/SSL/API or any other high end preamp? Regards
  34. W

    M/S Matrix

    Hello, Do you think there is a way to have a M/S matrix processing on the Axe FX? It would be useful to use for mixing in a different way two stereo signal.
  35. W

    Build an acoustic patch

    Hello, I would need some help. I'll soon have to build an acoustic patch for a piezo equipped guitar. I would put some eq, multiband, reverb... and a custom IR of an acoustic guitar, and I would like to do so via Axe Edit. How can I load the IR & save the preset to the axe? Thanks!
  36. W

    Soloing over loop

    Hi, I would like make a loop and do a solo over it with a different sound... I would like to make two different chains in the same preset, one with the loop, and then put a kind of "line selector" to switch from one chain to another... will the pan/volume or mixer block could do that? Or maybe...
  37. W

    MidiBuddy & Looper

    Hello, I would like to configure the midibuddy in this way: Switches 0 -4 : select patches Switches 5 : control pedal for the selected patch Switch 6 : looper rec Switch 7 : looper stack Switch 8 : looper stop Switch 9 : global tap tempo The only problem is that I don't know if it's possible...
  38. W

    I had enough!!!!!!!

    Sorry, but again is impossible to update the firmware. How can it be so difficult? Everytime I have to do something different, like install again the motu drivers, use another sysex program, switch from pc to mac... This time nothing works. I have a motu traveler. I'm currently running 9.0...
  39. W

    Help needed re: Midi Buddy

    Hello, I have a midi buddy with 7 pin midi out. The jack female of its Rolls power transformer doesn't fit in the DC imput jack of the Axe/Fx, so I put a line6 reduction jack... Everything plugs flawlessy... but it doesn't work! The pedalboard is not receiving power supply... Do you have any...
  40. W

    Firmware help

    Hi Everybody. I spent three days looking info on the forum trying to solve my firmware installation problem, but I'm still receiving bad checksum error. I tried the editor, SendSyx and MidiOx. I tried the 90ms setting, nothing. I use a motu traveller and a PC. What can I do? I have 7.11 and I...
  41. W

    Volume as global output

    Hello, I'm using an Ernie Ball pedal (Y cable) in the pedal port 1. Everything works great, but even with the learning function, the volume swell is not gradual: there's a way to solve this problem? It does it with another pedal too. Thanks!!!
  42. W

    Midi Buddy

    I'm looking for a super compact pedalboard that can be powered via midi. I'll add an expression pedal directly to the Axe FX What do you think about the Midi Buddy? Is that reliable? Thanks
  43. W

    CUSTOM TUNING Offsets

    Hello, It would be great to implement custom tunings on the offsets page.
  44. W

    New User Axe Fx Ultra 7.11

    Hello all I received today an european Axe Fx Ultra, with a more silent fan and 7.11 firmware. So far, so good! I have about 380 preset, but I didn't find empty location for new presets, so I overwrited some. Is this a correct procedure? Regards
Back
Top Bottom