Search results for query: *

  • Users: Mott
  • Content: Threads
  • Order by date
  1. Mott

    Not a Bug Cab Mute/Solo Buttons Not Reverting Back When Unchecked

    @Michael Pickens If I go into the cab section and select Solo or Mute, it is not possible to toggle on/off. You can switch between M and S on any cab, but not go back to having it as neither(unlit). Anyone else notice this? Only in Axe-Edit. Using the front panel will change it back and the...
  2. Mott

    Then We Were Ziggy’s Band

    The Rise And Fall Of Ziggy Stardust And The Spiders From Mars was released 50 years ago today. I was a boy of not quite 14 years. I don’t think any other record influenced my listening choices in subsequent years more than that one. Man I’m getting old. Time takes a cigarette……
  3. Mott

    Bug? Bias Excursion Time Doubles on FM9 vs AXE-III

    Not sure if this is just me or an issue, but I have noticed that when I compare amp settings between by FM9 and Axe-III the bias excursion time value on my FM9 is double the value on the Axe-III. If you do a channel reset, it will change to the value on the Axe3 but doing the refresh after...
  4. Mott

    Before You Start Turning Knobs To Control The Bass….

    Yesterday I brought up the new factory Swart Atomic preset(Nuclear Tone) while plugged into my Les Paul and the bass was waaaay too prominent. Turned bass knob almost to zero, enabled the cut switch, and it was still too strong. Then I went to the cabs and raised lo cut to about 125. That...
  5. Mott

    USB Buffer Size FM3 vs Axe III Options Different?

    I had never compared the USB buffer size settings for the III vs. FM3 and noticed on my units that the options in the AXEIII are 8-256 and on the FM3 they are 48-1536. Being pretty ignorant in this kind of thing, why the difference? I realize dividing FM3 values by 6 gives you the same numbers...
  6. Mott

    For Those Confused About Amp Resetting-A Guide

    Did this when the AxeIII got the amp reset update. Should all apply to the FM3 as well. I know, it's been discussed to death, but here is what I have found from trying to investigate every page in the Axe-Edit amp section. With the new amp reset feature in 16.0-- the only settings on any...
  7. Mott

    Revisiting Amp Factory IR's--Question

    There is little background info left in the IR section of his website since he's pretty much just doing Kemper stuff these days. I own both the Legends and Studio Delta packs and started messing with them again recently and find a lot of them to be very good and there are some cab/speaker...
  8. Mott

    Amp Reset Options--What Do They Do?--A Guide

    I know, it's been discussed to death, but here is what I have found from trying to investigate every page in the Axe-Edit amp section. With the new amp reset feature in 16.0-- the only settings on any page that will not revert to default are the items expressly on the authentic page(first...
  9. Mott

    Bug, User Stupidity, or What?

    Can someone look at this preset and tell my why I get no sound when I change the input source for any of the cab channels to left? Or if it works for you and not me? I've been through everything I can think of and can't figure it out.
  10. Mott

    Wish Ability To Change Control Switch Per Scene State Across All Presets

    Currently, it seems that all Factory presets and some others from outside vendors and forum members are set up with the active status of CS per scene as "Last", meaning that whatever state it was in when you exit a preset remains on when you change to another preset. While this may be the...
  11. Mott

    Scene Names Not Accurate on FC-12

    I'm having an issue in the scene layout on my FC-12 when using it with my FM3. All devices are at newest firmware available. I am trying to set up the scenes to toggle 1/5, 2/6, 3/7, 4/8. Have them all programmed to display as "current name". The problem is, when I press on a switch, the...
  12. Mott

    That Darn Fletcher Munson!

    Finally figured out why my FM3 was not as aurally exciting as my Axe III. I/O output 1 level set at +4 dBu on Axe III I/O output 1 level set at -10dBu on FM3 :mad:
  13. Mott

    Just In Case Anyone Else Breaks Off A Headphone Tip In The Axe-FX III

    This actually does work. Fast forward to 2:00 for the solution that worked for me. Wood screw! This caused about an hour of total freak out before I found the video. :eek:
  14. Mott

    Anybody Else Having Big Latency Problems in Live Mode?

    Stand Alone Version--pretty significant delay at any Asio buffer size below those "too small for the current USB streaming mode". I've always been fine with my DAW's with 1024 or 2048. I even reinstalled the Fractal driver to see if that helped. It didn't. Using Windows 7 with HP...
  15. Mott

    Cab-Lab Stand Alone vs. Plug In--Real Time Mixing

    Before I purchase, in the stand alone version, are we able to listen as we mix in real time, or is that only available with the plug in version? The description in the store was a little vague. At least to me!
  16. Mott

    List Of Amps NOT Ported TO G3 In Latest Beta

    Here's A List Of Amps NOT Ported TO G3 In Latest Beta Figured it would be easier to start a thread with this rather than post in the big one. This is everything without G3 after the amp name in the beta released today. Again, these are the ones that are NOT ported over yet. Shorter list...
  17. Mott

    Help--Recording Issue With Sonar X1 and Axe XL

    I assume this would be the correct forum for this sort of thing. If not, I'm sure Electronpirate will be along to move it. ;) The last few times I have tried to record using the Axe-FX II XL into Sonar, when I first gear up, everything is fine. But as soon as I hit stop after recording, I...
  18. Mott

    Guitar Face?

    Someone shared this with me. Too good to keep to myself. Pained Faces Of Soloing Rockstars Make A Lot More Sense With Giant Slugs
  19. Mott

    The New Bypass Feature And The Front Panel Tuner

    When using the Axe-II right next to my computer without the MFC plugged in, I have always just hit bypass to cut all the effects/etc to get a clean quiet sound while using the tuner. However, now we have a flashing "BYPASS" across the front panel so you can't see the little ball or the...
  20. Mott

    Anyone Coming To Austin For SXSW Next Week?

    Just curious if any Fractalites are coming or playing this year. I'm local so I will be down there with my wristband on most days/nights. It was fun meeting some of you guys last year. Scott Burrow--you coming again?
  21. Mott

    Update All Presets Utility

    Is this new, or have I just never scrolled down that far on that page? I didn't see it mentioned in the owners manual or any of the firmware release notes except the latest one. Can it be used to update the blocks on older user made presets rather than the old way of switching to another...
  22. Mott

    Dweezil Tonight In Austin

    Apparently Mr. Eric Johnson will be joining him for some of the show. Wonder if Dweezil will make him play through the Fractal....... I'm heading down there in about an hour. Can't wait.
  23. Mott

    Question: Amps With Only One Tone Knob

    I was messing with the Blankenship Leeds today and was looking on the innerweb for tweaking tips and saw it actually had only one tone knob. In instances like this, which knob on the Axe-FX would be the one to be tweaking to follow the real world amp--Mid or Treble? I assume it would be the...
  24. Mott

    Axe-FX II--Moonage Daydream

    This started out as just an attempt at making a patch to get close to the tone of Mick Ronson's great solo at the end of the song. It turned out so good to my ears that I ended up doing the whole tune. I used my PRS Singlecut for most of the song, but the double track on the solo was the PRS...
  25. Mott

    El Capistan into Effects Loop on Axe-II--What Am I Doing Wrong?

    I got antsy waiting for 6.0 and went out and bought an El Capistan to have something new to play with. It's the first time I've ever messed with the effects loop or tried to put an outboard pedal in with the Axe-II. But I can't get a sound to come out via the effects loop. It works fine if I...
  26. Mott

    A Tip For Those Still A Little Confused With The Amp Speaker Resonator Parameters

    I don't know if anyone else had this problem but me, but I figured I would tell you my solution. I was reading this quote by Cliff in the Wiki about how to dial in to hear the point where the "character" changes, or as Scott calls it the "blow up". Now my problem with this as well as Scott's...
  27. Mott

    X/Y And High Resolution Amps

    I searched the Wiki and did not get a definitive answer, although I think I know what it is. If you have a single amp in X, and another single amp in Y but a different model, does the resolution of both continue to be high, or does using 2 different models drop it to the lower res? I think...
  28. Mott

    Fun Little iPad App

    If you ever wanted to play around with a Moog, here's your chance. For 99 cents, you can't beat it. I've been having a blast all night. Animoog | Moog Music Inc
  29. Mott

    Error 14 on MFC Update--Help!

    I finally got around to trying to upgrade the firmware on my MFC-101 which has been sitting in my closet forever. Using a 5-pin midi from Axe-II to controller using Bome's Sendx. I consistently get it to show on the display that the upgrade is "100% complete". However, I notice on cobbler's...
  30. Mott

    Question: Stock Redwirez Cabs On Axe-II And Mics

    I looked on the Wiki and think I might have my answer, but just making sure. The Redwirez cabs I have bought from them all have various mics already assigned to the different cabs. Is this the case with the Redwirez and Ownhammers that come stock in the Axe-II? In other words, if you add a...
  31. Mott

    Help--Driver Install Issue

    Everything was running smoothly with the Axe II last night. This morning, my son got on the computer and did not know to turn on the Axe-Fx to listen to his Itunes, so apparently he tried to plug in the old Focusrite Audio instead, and I couldn't get any sound to my monitors when I replugged in...
  32. Mott

    Axe-FX As Soundcard--Just Thinking Out Loud Here

    Axe-FX II As Soundcard--Just Thinking Out Loud Here Axe-II should be here tomorrow. What are the negatives to just plugging the USB into the computer, my powered monitors into the Axe-II, and just using the Axe-FX as my sound card for everything? Would leaving the unit on a whole lot more...
  33. Mott

    Going to A New Interface--Some Questions and Confusion

    I just ordered a new HP Touchsmart All In One 610Q computer, and I am going to have to leave my trusty M-Audio Audiophile 192 behind and go USB. Here is how I have my Ultra and other audio equipment hooked up in my music room at the moment> Output 1 Balanced L/R XLR's plugged into 2 Adam A7...
  34. Mott

    Ultra/Standard Owners--A Positive Viewpoint

    Those of us that are staying in the Standard/Ultra fold for a while listen up. Let's be realistic. Cliff's time in the future is going to be spent on the new product. Forget about pie in the sky dreaming about retrofitting the new technology into the old units and continued updates. The...
  35. Mott

    Please Check My Logic--Resetting My Levels

    First, my setup--Axe-FX into Adam A7 powered monitors. While trying to get my presets and MFC-101 in sync, I have noticed my levels are all over the place, so I am trying to use the unity gain compared to bypass mode approach--set all presets close to the same volume as bypass mode...
  36. Mott

    Resetting Default Values

    With the 9.0 update, I was trying for the first time to retweak some patches. When I double tap on the bypass button, instead of resetting the default value of the amp/effect I am using, it shows the same values as before, but switches to the first effect/amp in that category. For instance, I...
  37. Mott

    Stupid noob query--FRFR vs. Home Stereo

    First post, so of course it's silly. Axe-FX Ultra owner for a couple of months. Currently, I have two ways of playing with my wonderful new toy. 1. Through my Vetta Combo using the method I found in the Axe-Wiki. SPDIF Out to Vetta's SPDIF In. Works pretty well, and I like being able...
Back
Top Bottom