Search results for query: *

  1. S

    Axe-Fx III Firmware 23.00 Release Candidate #2 (Beta #7)

    Yeah something went south with this update for me. Locked up everything as soon as load up bar finished to a black screen. Unresponsive. I only got it working by loading single preset mode which got me to the typical screen with a blank preset. When I tried to change presets it locked up. I...
  2. S

    Axe-Fx III Firmware 23.00 Release Candidate #2 (Beta #7)

    It's a blank screen after load up. There is no way to navigate anywhere
  3. S

    Axe-Fx III Firmware 23.00 Release Candidate #2 (Beta #7)

    Please Help Urgent. Updated new firmware. AxeFX boot up screen loads in. Then screen goes blank. Did the utility menu memory scan. (Page left and Page Right on Re-boot). Said everything was fine. Please help!!!
  4. S

    Need help with effects loop setup!

    HI Everyone. I am using an SY-1 pedal for my sound. It is a polyphonic synth sound. Here is where I need the help. I would like to use the AXE FX to give me useability options beyond what is on pedal. I was going to go directly from input to fx loop utilizing output 3 and input 3 and then go...
  5. S

    Interesting Tone finding

    I mean, I do have a splitter pedal so as to go through the AXE-FX and Magnatone separately so I can do that and not go through the Output 4. I was just pointing out that perhaps tweaks could be done to the converter as I did notice that the "raw" input was different and does lose something in...
  6. S

    Interesting Tone finding

    Hello. Im not in front of my unit but I went into the I/O settings and sent in 1 to out 4. It isn't in the grid on my preset
  7. S

    Interesting Tone finding

    Found this interesting. Have an AxeFX III markII. I was doing some recording and wanted to use my AXE FX as well as my 50's Magnatone 280 to record. I was using 2 Twonotes load boxes on the speaker outs on the amp. (you can also turn off the internal speakers with a switch so it's totally...
  8. S

    Dual Recording question

    So I found that I had to max out the output knob (5:00) on the front of the unit and add 6db in the I/O settings to make give the signal the same volume. Does that seem right?
  9. S

    Dual Recording question

    Thank you
  10. S

    Dual Recording question

    Hi Everyone. I am recording tones from Axe Fx into UA Apollo and want to also capture my 50's magnatone amp which has a stereo speaker output that is driving 2 speaker load IR units. I was going to go from instrument input on Axe FX and drive my Amp with the Left Output of Output 4 bypassing...
  11. S

    Looper help needed!

    Thanks everyone. That did it. I thought I had to somehow isolate an effect with a setting for the FC-12
  12. S

    Looper help needed!

    Hello Everyone searching for a solution. I have a acoustic guitar going in.. I have 6 different scenes and I would like the looper to record sound on scene 1 and play through as I switch scenes to change sounds. I would also like the looper to record sound from whatever scene I put into it and...
  13. S

    Stereo cab recording help needed

    Thank you for the response. So I am assuming there isn't a selection switch in the utilities to change this?
  14. S

    Stereo cab recording help needed

    Hi Everyone. I have a basic Amp into Cab setup. Cab is set to stereo with 2 different outputs running into panned left and right inputs into UA Apollo 8P. Trying to fine tune the cabinets and I ran into something and don't know why. When I mute the left side in the cab block, the gain goes...
  15. S

    Close to recreating "Freeze" effect - need help!

    Thanks man. That did what I needed it to do!!!
  16. S

    Close to recreating "Freeze" effect - need help!

    HI Fractal people. I have been looking to recreate the freeze effect pedal by Electro Harmonix. I am very close. Using Mega tap delay with Reverse Reverb Echo. However, I need help. Using effect switch on off on FC-12. However, it kills the effect immediately. I would like to have it taper off...
  17. S

    Help on FC -12 invert effect light

    HI Axe Commmunity I have FC-12 setup with scenes and activating effects. When I want a certain scene, the light around the switch lights up for the scene chosen. However, on a switch I have to activate a CS-1 to turn on effect the light is off when it's on and on when the effect is off. Can I...
  18. S

    AXE 3 plus acoustic plus MIDI synth equals MANIA and AWESOMENESS

    Hey everyone. Check it out. Got my system working now with my Acoustic my AXE my Roland GR-20, 2 volume pedals, a sustain switch for synth and a Sustain Plus pedal for my acoustic working. All with doing midi program changes on Scenes!! Wicked awesome sounds but a real pain to setup. So i got...
  19. S

    How do I add a Roland synth effect?

    Yes. I watched those Fremen videos and that's super cool. However, I was hoping not to have to change chords with my foot. The GK with Roland follows my chord changes.
  20. S

    How do I add a Roland synth effect?

    Hi Axe users. I have an Larivee acoustic with a Roland Synth and a taped on GR-33 pickup. It works great for adding a synth pad that holds underneath and synth pad chord changes with the chords on the acoustic. I would like to do away with the the roland synth and pickup but can't figure out...
  21. S

    Output routing help needed - weirdness happening!!

    Hi Chris. I will do that but i don't understand what i did was wrong. It seems like the way i was trying to make that work was right based on the options that i had setup. Can you explain how what i did isn't working? As in the I/O setup options that i did. Especially with the sum L and Right...
  22. S

    Output routing help needed - weirdness happening!!

    Hey Kamil.. i thought it was a phase thing as well but there is an option to reverse phase in the output config and it did nothing.
  23. S

    Output routing help needed - weirdness happening!!

    Hey Bakerman.. Shouldn't the Sum L + R in output 2 config fix that issue? I will try adding an output block but it seems like this might be a glitch cause i would think i set it up correctly for what i was trying to achieve.
  24. S

    Output routing help needed - weirdness happening!!

    Here is the preset... So you will plug a XLR into output 2 left side. Then run to powered monitor. Go into Cab Block and run through Cab 1 on only... Cab 1 & 2 on and then Cab 2 on only. As i said. Output 1 is working as i believe it should. It's Output 2 that i seem to be having trouble with...
  25. S

    Output routing help needed - weirdness happening!!

    Thanks for the questions everyone. Input into AXE is mono in front. AMP BLOCK -> CAB BLOCK... Cab block is panned - CAB 1 - Hard Left... CAB 2 - Hard Right... This works as it should in my recording monitors Left and Right when coming out Left and Right from Output 1 on the AXE into Apollo...
  26. S

    Output routing help needed - weirdness happening!!

    Sorry.. .. Mono into instrument one in Axe III..
  27. S

    Output routing help needed - weirdness happening!!

    Hello Axe gang. need some output help!! I am running Axe III into UA Apollo 8p mono in and stereo output 1 to Left And Right Apollo in. 1 Cab panned hard Left and 1 Cab Panned hard right. Then running Output 2 to config copying output 1. Mode Sum L and R.. running out of AXE with one xlr...
  28. S

    Axe-Fx III cab help please

    i am a little unsure about how to decipher this. I Understand what most is. However, what does (A,B,C,D) after 57 L and R refer to? And is that explanation the same on every speaker sim? 84 — 2x12 '59 Tweed Dbl 57 -L A — FAS 685 — 2x12 '59 Tweed Dbl 57 -L B — FAS 686 — 2x12 '59 Tweed Dbl 57...
  29. S

    Axe-Fx III setup output advice

    i will give it a try... I gave up on it a long time ago. Maybe time to learn something new!
  30. S

    Axe-Fx III setup output advice

    I'm running my UA on a Mac Book Pro. Can't run two audio interfaces on Mac at once. I'm doing lots of singing as well so can't be switching all the time.
  31. S

    Axe-Fx III setup output advice

    Hey Everyone. Been a super long time AXE user. I've had every iteration that has happened and still enjoy it. I am setting mine up this way and wonder if its a good way to do it. AXE FX output 1 running stereo to UAD apollo for recording. output 2 copied from output 1 using a...
  32. S

    Amp sim help needed

    Hi Friends I have and play through an Old Silvertone and an Old 57 Magnatone model 280. I really would like to Model/Emulate these on the Axe but not sure where to start and what amps and cab's to work from . Don't want to tone match since i never had really much success with it. Can anyone...
  33. S

    Performance Help needed!!!

    okay. I will try the additional wedge in front for feel. That sounds like a decent compromise. At least i feel like many have the same experience and it wasn't me just being a princess.
  34. S

    Performance Help needed!!!

    Hi Everyone. I am the music director/pastor of a large church in Canada. I am having a problem with performance issues. Here is my gear run down for context. Gretsch white falcon into AXE FX II. We run into a high end sound system out front with using Roland M-48 for personal mixers. I have a...
  35. S

    Freeze Effect help needed!!

    Yes i am familiar with that function. That isn't quite what i need. Thanks for the suggestion... Would the looper do what i want?? i wouldn't know how to set it up to do that though.
  36. S

    Freeze Effect help needed!!

    Hi Axe-ites I made a request years ago for a "freeze effect" like the pedal i am using now. I was wondering if this was at all still possible in a firmware update or is there someway for me to emulate this with the current effects that are in the Axe Fx.. Love to not have to drag this pedal...
  37. S

    Dephase control in cab block question.

    So how does one use this exactly... do i put it to 10 to get rid of the "phasiness" which i'm not sure what that means!
  38. S

    Sunday Morning Music Disaster!!

    Okay Thanks I am on the waiting list for a new MFC_101. Sean
  39. S

    Sunday Morning Music Disaster!!

    Okay i have finally narrowed it down!!! It was a tap tempo pedal controller attached to the Ground Control Pro. Everything looks like its properly setup on the Ground Control and Axe (proper midi config). However, when i tap tempo it shuts off volume. The Edited light comes on. I can't tell...
  40. S

    Sunday Morning Music Disaster!!

    Yeah, I'm sure it was within the Axe FX II. I am assuming the firmware update i did before the performance went bad. I just recreated the exact thing with everything setup and can't make it happen again. (I did redo the firmware update after my disaster so i'm assuming that the firmware update i...
  41. S

    Sunday Morning Music Disaster!!

    Yes i had considered that
  42. S

    Sunday Morning Music Disaster!!

    No it was definitely in the Fractal. I have 2 units, One that is used at church and my own personal one. I had to race home and get my own between sets and it worked fine.
  43. S

    Sunday Morning Music Disaster!!

    I will keep all your comments for next time. I have had it on for the last 2 hours and can't recreate the problem. I haven't hooked it up to the ground control pro but I'm doubtful this was the issue. UNLESS. i am running wall-wart power through a 7 pin midi cable. (phantom power to midi plug on...
  44. S

    Sunday Morning Music Disaster!!

    Yes i did have a Ground Control Pro hooked up. However, I have been using it for the last year without any problems
  45. S

    Sunday Morning Music Disaster!!

    Hi everyone. Had the worst worship leading day ever. First off, Video system program feed fitzed out on one of our feeds. Didn't work all service. Then setup for soundcheck and In-ear monitor started humming. I was the only one that had the problem. Intermittent so couldn't trace source...
  46. S

    Hold/Freeze Effect

    HI everyone... I would like to do an effect on the Axe like the Electro Harmonix freeze. Is this possible on Axe.. There is a hold on the reverb. Wondering if i could do that for the complete sound. Any Ideas??? Sean
  47. S

    Pedal Help Please

    Hi everyone. I would like to use an effect on the axe like an electro harmonix freeze and a super ego. How would i accomplish this on the Axe Sean
  48. S

    Hot Sh@#$%@ - Eddie's still got it!!

    For me it was hearing 1984.. I remember doing a school project in my Grade 5 class on it. Totally inspired me to pick up the guitar.
  49. S

    Hot Sh@#$%@ - Eddie's still got it!!

    Just watched Eddie live at Smithsonian. That guy still is the shizzzz. Im only posting it here fellow axe users cause i know we all love him!!!! he starts playing 25 min in... Sean https://www.youtube.com/watch?v=sXoHyiJUItQ#t=1914
  50. S

    Axe Edit - Offline mode??

    Is there a way to use axe edit offline.. I have all my presets backed up. Sean
  51. S

    Backup between AXE FXX II and XL

    Let me make that clearer.. I did a system backup from and XL and want to use all those patches on an FX II.. i can't seem to get fractal bot to let me do this. Please Help
  52. S

    Backup between AXE FXX II and XL

    Hi Axites. i need to dump an AXEFX II XL to and AXE FX II. I can't seem to be able to do it. Does anyone know how?? Sean
  53. S

    Amp sim suggestions help

    Hi Everyone. I have a Gretsch White Falcon and i really fell in love with the Tone of a Peavey classic 30 i was playing through on the weekend. What amp and cab would i use to emulate the tone from this unit on my Axe FxII Sean
  54. S

    Bill Frisell sound

    Hi everyone want to create a Bill Frisell sound... I have a Gretsch white falcon that I play but i would like to achieve that sound. any suggestions on where to start (effects, amp, cab)??
  55. S

    emulating pedals

    Hi Fractal persons i have a really awesome voodoo lab micro vibe i want to authentically model.. How would i actually set this up. What steps would i take to make my axe replicate this... In fact. how would a person do that with any pedal?? Sure i will use my ear after but i would like to get...
  56. S

    Input Gain - Output Gain & Master volume/ Mixer level Linked Suggestion??

    Thank you Chris. That was very helpful. However my initial question for a feature still remains. Wouldn't it be great if the pre amp and/or had option of bring inversely linked to the mixer level. Then u could quickly change tone without affecting the overall level and really hear quick...
  57. S

    Input Gain - Output Gain & Master volume/ Mixer level Linked Suggestion??

    Hello Forum I am just working through building some of my own presets and i am a little confused on something. I read somewhere that when i was building presets it was a good idea to match the In level and the out level on the utility page. is that true?? wouldn't the process for all...
Back
Top Bottom