Search results for query: *

  1. J

    Connect AXE-FX and iPad

    Oh sorry, the thread was 1 year old before I "resurrected it" today so I thought you were referring to me.
  2. J

    Connect AXE-FX and iPad

    No, I want to use the axe as an interface. I don't want to insert the ipad into the axe's grid, I know how to do that. What I want to do is to use the axe fx as an irig hd for example. Guitar in axe fx and from axe fx's usb i/o to ipad's lightning i/o. Then use the apps on the ipad and monitor...
  3. J

    Connect AXE-FX and iPad

    Has anyone tried to use the axe fx II as an i/o interface for ipad (lightning) using the cck? It would save me some money if I didn't have to buy a seperate interface just to plug in my guitar etc to my ipad. I know there are some cheap interfaces (e.g. irig) but I want a cleaner digital signal...
  4. J

    Axe-fx II/XL Touch Sensitivity

    I'm not sure what exactly you mean when you say touch sensitivity, but have you tried disabling the input noise gate? Compared to my axe fx standard, the II has far more touch sensitivity (well, according to what I call touch sensitivity)
  5. J

    neck pick up issues with axe fx / is it just me?!?!

    Ok, first of all, I'm not trying to defend Cliff or anyone, but I think that what he meant when he said "nonsence", was that the axe itself cannot possibly do what you suggest (boost or cut volume depending on pickup selection). That was the nonsence part: That it doesn't make sence (non-sence)...
  6. J

    buzzing noise/hum after update to FW 13

    Have you started using any other new equipment lately? It could be a ground loop if not everything in the chain is not plugged in the same wall socket. If you have other devices plugged in different sockets in the same room as the axe, try to plug them in the same socket as the axe (if possible)...
  7. J

    Taming the Mark Day VH pre set

    Try the same preset but change the amp to Plexi 50 Jump. Volume 1 around 1 to 2 o' clock, volume 2 around noon, bass around 1 o'clock, middle, treble, presence and master dimed. Use the TV mix or any good greenback IR and adjust the low pass/hi pass in the cab block to taste. Reduce the bright...
  8. J

    Who Wants to Test Some New Firmware? (12.03 Beta 5 UPDATE)

    Thnaks Cliff. Worked like a charm. It just took me so long to report back because I had to use midi and the update process (including the time it took me to take the axe out of the rack etc) took about half an hour.
  9. J

    Who Wants to Test Some New Firmware? (12.03 Beta 5 UPDATE)

    I contacted G66 but haven't had a response yet.
  10. J

    Who Wants to Test Some New Firmware? (12.03 Beta 5 UPDATE)

    Tried to update from 12.02 to the 12.03 beta 5 and while the axe was in the programming state, the screen went blank and had some strange noise comming from the speakers. Turned the axe off and after 5 secs on again and now everything is stuck with all lights on etc. That had happened to me...
  11. J

    How do you explain what an Axe Fx is to someone who has never played guitar?

    I'd say that it's a company that makes guitarists' dreams come true...
  12. J

    What will be Fractal's next product?

    What I would like to see sometime in the future is a complete FAS package for pc/mac: A PCI xpress soundcard with the DSPs needed for delivering the full axe II performance An external I/O module with all the I/Os you could use in a pro studio (both digital and analogue, eg a pair of mic ins...
  13. J

    Can someone check this out? (JTM 45)

    That's good to know Cliff, thanks for the reply! I actually owned a 100w super lead plexi from '73 but hadn't noticed this behaviour. But, to be fair, that amp had a trany replaced, so maybe that's why I couldn't hear the ghost notes. I had read before in another thread a similar "problem" and...
  14. J

    Can someone check this out? (JTM 45)

    No, it's not a matter of technique. If I mute every other string and just play at the 12th fret on the D string, I can clearly hear what appears to be a "ghost" note in the background, which is not exactly a note, but like a steady overtone that you can listen for as long as you let the note...
  15. J

    Can someone check this out? (JTM 45)

    Like I said, can't record anything at the moment, or upload presets. After tweaking the sag, the problem goes away, I just started the thread in case someone else is having the same problem AND to check if this is normal behaviour for this amp model or not.
  16. J

    Can someone check this out? (JTM 45)

    Also, keep in mind that this "ghost note" seems to only appear when using the D string on the 12+ fret, which originally had me thinking that it was my guitars' fault, until I had them set up professionally and found out that the problem was still there. Then I lowered the pole screw which also...
  17. J

    Can someone check this out? (JTM 45)

    Yeah, forgot to write about that, that was actually the very first thing I tried to adjust after using the default settings (with which the problem was present). I raised the B+ which helped, but only when I really cranked it (at about 3+ o'clock), which made the amp too "stiff" and far off...
  18. J

    Can someone check this out? (JTM 45)

    Hey, so I was trying to get a similar tone to Gary Moore's still got the blues, using the plexi trebble patch. I just switched the amp to JTM 45 and used a fat rat drive (to try and come close to the guv'nor originally used by GM). I ended up with an awesome lead sound, which clears up nicely...
  19. J

    ...

    Although I like both bands very much, I vote for Iron Maiden. I grew up listening to all their albums, they were the main reason why I started playing the guitar and I can honestly say that (for me) it's the only metal band that for the first 8 albums they released (+ numerous singles & b...
  20. J

    Calling Axe Marshall Experts

    I'd say use the plexi 50. Also, try lowering the bright cap to 240-120 for a more vintage less harsh top end (and cleaner). You might also like lowering the B+ a bit and upping the sag just a bit. If you feel you need more roundness and a bit more gain, also try upping the bias a bit.
  21. J

    Can I Use Out1 XLR's and Jacks Without Ground Loop?

    IIRC, yes, you can use both the xlr and jacks at the same time.
  22. J

    (Current HD500 owner) Equivalent of output modes?

    With the Axe you have the ability to either send your signal with cab and power amp sims on (direct to pa or studio monitors), or you can send your signal without cab sims (e.g. when using a real guitar cab with a ss pa), or you can even send your signal without cab sims and without power amp...
  23. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    Glad it worked! I don't think you'll have a problem by setting your monitors' volume lower, but keep in mind, that even if you do that, if you are careless with the Axe's volume knob, you would still clip the monitors' input (thus distortion etc). So, I'd say the best thing to do, is to set...
  24. J

    JONESING FOR v10 RELEASE NOTES!!!

    Sorry, if this has been covered, but what about the plexi 50watts model that Cliff mentioned a few weeks back? I'd love to try that one!
  25. J

    Recording Tone Problem/Question

    Low freqs have much more volume than high freqs. If you stack them up, the lows will be even louder, masking the weaker highs, which causes the "illusion" of the highs being too low. Generally speaking, when recording guitar, I would do a 100-120Hz (at least) low cut and 7k-9k hi cut to fit the...
  26. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    No, I wouldn't recommend it... The axe can give a pretty hot signal and can easily clip the input of most amps when maxed. I'd say, set your monitors to about halfway and then start raising your out1 knob till you get the volume you need (it might be less than halfway on the axe or even less...
  27. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    If you have other cables try them out, you never know... If the cables are more than 2-3m long you should go with balanced cables anyway, cause in general, unbalanced cables are prone to noise from other electrical equipment. Also, check your manual, as IIRC, the axe II supports a humbuster...
  28. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    What pickups do you have? SCs? Maybe you get some hum from the pickups (especially if you are close to a pc/monitor/dimmers etc)? On my axe all the outs seem to work as they should... As a final solution, try lifting the ground switch to see what happens...
  29. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    Have you connected your axe and monitors to the same power outlet? If not, try to do that and see if that helps. It could be a ground loop problem. The axe (normally) is dead silent and clean.
  30. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    Yes, that's how you should connect it. Your Axe has 2 sets of unbalanced/balanced outputs: out1(L+R) and out2(L+R). You can choose one of them and send your L and R cables to your L and R speakers accordingly. If you have balanced cables, use the balanced output instead of the unbalanced. Inside...
  31. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    For the crackling, make sure you are not overloading the cpu and if that doesn't work,check your cables . Also try to disconnect the usb cable and see if that helps. You should finally make sure your guitar and/or your power outlets don't have any grounding issues.
  32. J

    Yamaha HS80M and AXEII query... Help a brother out please.

    You should connect the speakers to one output only (out1:L+R), plug your guitar into the instr. input, set input to left only and adjust your input correctly (touch the red lights). After that, set your HS80M at about half way volume-wise and then start raising your out1 level on the axe. If you...
  33. J

    Name your seven favorite ways to offend people

    Hah hah, good catch... I had originally written stupidity and hypocrisy and then decided to add selfishness too, but forgot to change the number... Now number's gone so everything is good!
  34. J

    Name your seven favorite ways to offend people

    Uhmmm... Being sarcastic/ironic is one way (my favourite), but I've found that the best way to offend someone is to constantly criticise him/her. Another way to piss people off (works really well) is being constantly against something (anything actually, just for the shake of being "different"...
  35. J

    Help me buy a new guitar!

    You can always make your own custom made guitar from parts (eg Warmoth). For $1000 you can buy a nice body (your wood selection) with all the cavities/contours you want, a nice neck with the wood you want and then add a bridge, pickups and find a good technician to put it all together. Only...
  36. J

    Friends and enemies

    And still is...
  37. J

    Nothing like a real Plexi

    I love plexis. Used to own a '73 super lead 100w. It was a beast. This thing even with volume on 0 was loud enough for practicing (!), but it was very brittle at very low volumes. All the magic happened when you put the volume on 4 (or higher). The sound fattened up, compressed, sustained...
  38. J

    WHAT IS THE BEST HOME SETUP FOR THE FX II

    Yep... A pair of good studio monitors ftw... My choice was a pair of Yamaha HS80M. Got rid of my 4x12 and 2x12, got rid of my atomic frfr and went to studio monitors. Never been happier.
  39. J

    For those not on Facebook

    Get a PC !!! :P
  40. J

    It's time again: What new music are you listening to?

    Lately I've been listening to some jazz tunes... Dave Brubeck to be exact...
  41. J

    EVH Wolfgang pup change

    Or you can try the Bareknuckle Rebel Yell set, which according to BK is very similar to the VHII but with more output.
  42. J

    EVH Wolfgang pup change

    If you want the early VH sound, I would highly recommend the VHII Bareknuckle set. They are like hot-rodded PAFs Alnico V humbuckers (they split nicely too). They are not too hot, so if you want something with a huge output you might not like them. For blues, rock, hard rock and old school metal...
  43. J

    Hiwatt / Too much bass??

    Yes, that's what I meant to say. Translation mistake of the moment...I meant to say amplify.
  44. J

    Hiwatt / Too much bass??

    Also, if you use a mic in the cab block, play with the proximity. A mic closer to the cab will attenuate low freqs.
  45. J

    Hiwatt / Too much bass??

    Maybe reset the amp block, or even better start another preset from scratch and just select amp and cab and see how it sounds. Also check your Output GEQs, make sure they are flat.
  46. J

    Home studio upgrade?

    I'd go for a pair of Yamaha HS80M. Great speakers for the price, very "honest" sounding. They will NOT make your sound prettier (like many monitors do), but you don't really want that anyway for mixes... You need a real representation of what you are inputing and the Yamahas do that very well...
  47. J

    Flat Response on my QSC HPRi Actives? may be numb nuts question (dont move just yet)

    I guess you could use TM to get a flatter eq from your speakers, but that would mean that you'd have to use a nice uncolouring mic and preamp (which are quite expensive), a treated room to avoid reflections etc. IOW, IMO, you'd be better off just recording with your current setup and see how it...
  48. J

    Another V10 Preview II

    I liked the first clip better. I can't really tell the difference but it seems to me that the cleaner parts have more hi-end content. On the other hand, I used a cheap pair of headphones, so I could be wrong... As to which one is the axe... Well, I hope it's the first clip!
  49. J

    Going Back to Valves ( for now )

    I don't know... I was constantly going through the endless search for "the tone" back when I had tube amps. Everytime I thought that I had found "the tone", I was ending up retweaking the very next day since it seemed that my amps never sounded the same each and every day. So I was spending more...
  50. J

    Tuning 1/2 step down without using pitch shift..?

    Me neither...
  51. J

    Tuning 1/2 step down without using pitch shift..?

    Ah, so you only want to retune your guitar 1/2 step down. The tuner will let you know which string you are adjusting and if you are in tune. (it will display each note as javajunkie wrote, so you just need to tune according to that). You don't have to adjust anything.
  52. J

    Tuning 1/2 step down without using pitch shift..?

    I'm confused... Do you want to just use the tuner in order to tune 1/2 step down, or you want to change your pitch without retuning your guitar? Cause if you just want to use the tuner to retune your guitar to 1/2 step down, as jacajunkie said, you can just use it as it is. It's chromatic so you...
  53. J

    Tuning 1/2 step down without using pitch shift..?

    You either have to use pitch shift or retune your guitar 1/2 step down. AFAIK that is...
  54. J

    Suggestions wanted for new guitar (Van Halen, Nuno)

    Or you can build your own warmoth superstrat. I did, it cost me about 1300$ (including the luthier's fee for assembling etc). I chose a strat alder body (no pickguard) with quilt maple top and a birdseye maple neck (banana headstock). Added some nice vintage style tuners, an original made in...
  55. J

    @Fender-maniacs, I need help choosing my first Strat

    If you are planning on spending enough money for a custom shop, I'd suggest you check out Suhr's classic series. Some of the best strats money can buy imo.
  56. J

    @Fender-maniacs, I need help choosing my first Strat

    Well, alder gives more mids, swamp ash gives deeper bass and highs, rosewood is warmer but with some "sizzle" (especially when playing with distortion) whereas maple is more "alive" with more highs and chime but with less "sizzle". If you want more twang, you might like better the combination of...
  57. J

    When is enough Amps enough?

    Yes, but for people who don't like (or don't have time/knowledge) to adjust advanced menus etc to make an amp sim work for them as they want it to, it's much easier to just pick an amp that is already very close to what you are looking for sound-wise and feel-wise and just adjust the basic...
  58. J

    Is there a big difference in to QUALITY of the EFFECTS between the ultra & 2

    The tape daley algorithms alone, would be an excuse enough for me to go for the II if I only needed to use it for effects. The reverbs are nicer and the drives as well. I also found that is easier to dial in flanger,chorus and phaser with the Axe II... On the other hand, if money is...
  59. J

    Axe-Fx II Firmware 9 Public Beta

    I think it means that the 5150 (the real one) sounds more aggressive because of the colder bias, so if you would like to have a similar effect with other amps, you could try to lower the bias so that you get more crossover distortion. That means that the 5150 is set to mimic the real thing...
  60. J

    Digital clipping?

    The output leds only show internal clipping (inside your axe 2), not input clipping at your FRFR or USB out. You might be actually clipping the input of your monitors (axe has a hot output). Try setting your axe's output to about 9-10 o'clock and compensate if needed from the monitor's end. As...
  61. J

    Using a valve power amp....AxeFX power amps on or off??

    When I was using a valve PA (Boogie 50/50) I was always using PA sims on and cabs off. If however you are planning to crank your valve PA, I would recommend to try with PA sims off AND on to see what suits you best. If you're cranking the PA, you are going to have a good deal of coloration in...
  62. J

    axe sounding terrible through guitar cab?

    I used to use my standard back in the days with a mesa boogie 50/50 and 4x12 cab. The sound was excellent, albeit similar from patch to patch (especially for hi-gain sounds) since every amp model was going through the same PA and cab. I then sold the 50/50 and used an art sla2. The sound was...
  63. J

    Just recieved my axe fx 2 - help!

    The red lights on the axe (for the outputs) only indicate that something is clipping inside the axe fx's patch/sound chain. They don't indicate any clipping that might occur in the input of any other equipment that the axe is plugged into (it cannot auto-detect what you connect on it's outputs...
  64. J

    Axe-Fx II Firmware Version 8.01a Up

    You won't be able to find them in Axe edit (until the latest version is out), but you should be able to find them via the the front panel. Make sure that 8.01a is indeed installed and if it is (you can check from the utility menu), just go to a patch, select edit amp and you should find the new...
  65. J

    Monitor acoustics

    I don't understand why you can't use the 2 outputs of the Axe: Output 1 (as you normally use it)> FOH Output 2 (EQed via output 2 GEQ) >FOH > aux bus > monitors
  66. J

    Fractal Noob

    Btw, if you go to the recordings section you can find videos with all the factory presets (banks A,B,C) so you can have a listen.
  67. J

    Fractal Noob

    No dislikes from me. The axe (I and II, but especially the II) is the best music-oriented purchase I have ever made in my 20+ years of buying and selling equipment. It completely cured my GAS for amps, preamps, effects etc and I can finally say that I can have the sound I hear in my head (well...
  68. J

    Clipping

    Go to I/O and adjust your input there. You should tickle the red light and have constant yellow lights while strumming hard. That would be all... However, if you want to do this on selected patches, just turn down the trim control in the first page of the amp controls. (Note: turning down the...
  69. J

    have a listen and tell me where the distortion is from

    Yeah, I don't think it has anything to do with the digital recording, if it did you would have heard the noise constantly and randomly, not just when using a certain type of delay and then only in the repeats... How's the cpu usage? (sorry I haven't tried the patch, it will be a few days before...
  70. J

    have a listen and tell me where the distortion is from

    I think he means that you should try and record analog to see if the noise is still there.
  71. J

    have a listen and tell me where the distortion is from

    I guess you could make a patch with only a delay to see if the noise is still there... If the noise is there with only the delay and when bypassing it the noise stops, I would have to say that there is indeed sth strange going on...
  72. J

    have a listen and tell me where the distortion is from

    Around 7sec I can hear sth, it sounds to me like static noise... You can hear it in the repeats of the delay too. Rest of the clip sounds fine to me... What guitar is it? Pickups? Does it have a pickguard? Sometimes you get some static electricity by rubbing your hand against the plastic...
  73. J

    Output 2 & Cab Block

    AFAIK, there is no way to disable globally the cabs sims for only one output. Just place your cab block last in line and right before it place the effect loop block. That way you get all the effects and amp sim to ouput 2 and all the effects, amp sim and cab sims to output 1.
  74. J

    The new amps don't show in Axe Edit

    Wait for the new axe edit to be released. With every (major) firmware update there comes an update for the axe edit as well. It is not recommended to use axe edit now with firmware 7 or 8 due to some glitches that have been reported. The new axe edit will be available soon. You can still access...
  75. J

    bit of an odd problem this morning.

    Did you use ace edit to load the IRs? I think the latest version available is not recommended as "safe to use" yet. If you haven't tried already, use midiox or sth similar to load the IRs and don't use the axe edit for now.
  76. J

    Crackle, Pop Vinyl Record Noise Solution?

    Could it be something like static electricity? (e.g. rubbing your hand against the guitar's pickguard sometimes does that) This is really strange indeed...
  77. J

    bare knuckle pickups???

    I have a VHII set in one of my guitars and another guitar (my main) with VHII bridge humbucker , irish tour middle and little '59 neck. Excellent pickups, very clear with medium output. I'd call them hot paf with A5 magnets as that's what they are really. With these babies, I can play from blues...
  78. J

    Best studio monitors for the Axe FX?

    Some more love for the Yamaha's HS80M. I actually sold my atomic active wedge to get a pair of the Yamahas and saved the rest of the money from selling the atomic. I wasn't playing live (and won't be anytime soon), so I thought the best thing to do, was to buy a pair of nice studio monitors and...
  79. J

    EQ TIPS TO MAKE MY STRAT SOUND MORE VINTAGE.

    Well, an EMG SA or SV set is noiseless... I wouldn't call their sound vintage, but they give a nice clean single coil sound without any noise...
  80. J

    Changing strings: all at once VS one at a time.

    One at a time for me too... Unless you want to clean the fretboard etc of course. It's much easier to tune and setup the guitar if you change strings one by one. And if you use the same brand and size of strings each time you change them, it is more likely that your intonation will be ok...
  81. J

    Tone randomely flip-flopping between great and harsh after 7.0 upgrade

    Check your cables (from the axe to the matrix, from the matrix to the cabs), move them around a bit to see if anything changes. I once experienced with my standard something similar. The sound seemed to be "lifeless", a bit empty etc. After spending a little time with the I/O menu and the...
  82. J

    Anyone else Smoke in the same room as their Axe II ?

    Just try to say that to Eddie VH :D
  83. J

    Anyone else Smoke in the same room as their Axe II ?

    Yeah, you can smoke freely, no problem, as long as it's weed! :D mmmm... it even makes the sound more organic...
  84. J

    Axe-FX II - Noisy Output 2 (Digital and Crackle Pops)

    Check your graphic eqs for each output, make sure everything is flat for both outputs (including the level control of the geq). I can't remember if the boost/pad control actually does something for the analogue outputs, I think it only affects the digi out... But I quess you can always check it...
  85. J

    Went Direct for the first time and regretted it...

    Use out2 to send the signal to your PA and cab(s) (since usually you only need line outs for this kind of connection) and use out1 (xlrs) to send your foh mix. Just put the cab block last in your layout and place an effects loop block right before the cab. Also, make sure you haven't bypassed...
  86. J

    Okay, guess this one

    The first clip seems to have a bit more gain. I actually liked the first part more! Awesome! Pretty soon we're gonna HAVE to start a thread for Cliff ala Chuck Norris Facts :D
  87. J

    Hey all New FX2 user here. - questions!

    Yes, you can just use an effects loop block before everything else (so put it first in line) in the signal chain. That will give you the direct guitar signal on Out2. Don't use an effects return, as you only want to send the output to out 2. But, I repeat, that you can always use 2 amps, 2 cabs...
  88. J

    Hey all New FX2 user here. - questions!

    If I understood correctly, you get a modelled amp from the kemper and another one from the 11R right? You can always use 2 amps and cabs (plus effects) in a single patch with axe fx (and of course with axe fx II). You don't need to route anything to another output. Just place 2 amps and 2 cabs...
  89. J

    Saw Machine Head using Axe FX last night...

    Hmmm... I don't seem to have a problem getting screaming pinched harmonics easily (even with low volume and even when I just connect the axe fx II to my HiFi stereo system). And that's even when using rather mid-gain amps like plexis (cranked eq and master, not level)... Maybe you should raise...
  90. J

    Who has " sold it all" and gone AXE FX??????

    Sold a 1973 plexi, a Mesa Boogie studio preamp and a Mesa Boogie 50/50 to fund the axe fx standard back in the days. Then I upgraded to II when it came out (and sold a 4x12" to fund an atomic frfr), as I was able to sell my standard rather quickly. NEVER looked back. My amp GAS is long gone...
  91. J

    Missing amp model After updating to 6.01

    There are amps in the new firmware? I only found fxs!
  92. J

    Need help with this: routing the drive amp past chorus

    Yeah, forgot to mention I moved the clean amp to the 1st line (to go with the chorus). I don't know, the way I look at the grid, it seems to me that the way I connected everything, should give you all effects for both amps except for chorus which is only dedicated to the clean amp... I can't...
  93. J

    Need help with this: routing the drive amp past chorus

    If I understood correctly, (which means that you want the chorus to go with the clean amp but not with the drive amp), you just need to place the mixer after the chorus block and fill with shunts the 1st line from amp2 till the mixer (where you connect the last shunt from the 1st line with the...
  94. J

    Question for cliff: How to emulate a variac?

    Hi, thanks for the response and the very useful info! It seems that what I've already tried should be in the right direction (based both on the sounds I get and the info you provided). I've had great success by using plexi treble with mids, treb and presence cranked and perhaps the bass around 4...
  95. J

    Opinions / Thoughts about EMG pickups?

    I've been on and off EMGs for many years (and in many different guitars). They are quality pickups, no doubt about it. The thing I don't like about them, is that they tend to make every guitar sound very similar to any other guitar equipped with (the same) EMGs. Every pickup has a character...
  96. J

    Bass cut in II vs Ultra?

    You can always adjust the low res (speaker page in amp block) to give you a bit of a thump...
  97. J

    Bass cut in II vs Ultra?

    If you still have an ultra, you can always TM the tone, no? But I think that the difference you hear is probably due to other freqs being different (especially in the 2000Hz and 125Hz from what I can see) and not the sub 60Hz territory. For example upping the 125Hz and 2000Hz will add some bite...
  98. J

    Van Halen tone - No Tone Matching!!

    I've had some good results using the plexi treble with bright on, saturation on, bass close to 0, middle almost cranked, presence around 1 o' clock and treb around 3 o'clock. Drive at 7.5 and master at 9.3. You are not using frfr, so the cab would be of no interest to you... But just in case you...
  99. J

    Question for cliff: How to emulate a variac?

    I had posted this in the past as a wish in the wishlist section (back to the AXE I days) but apparently not many considered this as something important... That may be true, what with so many parameters available already, but in a real life tube amp (e.g. plexi), use of a variac would have quite...
  100. J

    I'm supprised.

    Well Stevie for one thing used to play with heavy strings (13s I think) which plays a huge part in his sound. And it's not easy to play like Stevie with 13s... No sir... So basically you can always come close to his sound, but I think you can never really get "the tone" unless you start using a...
Back
Top Bottom