Search results for query: *

  1. craiguitar

    Best poweramp for Axe III (Goal: LOUDDDDD)

    I got an LXII recently, and was expecting great things, compared to my Matrix GT1000FX. Although the LXII is superb, what I found was just how good the Matrix really is. There's not a lot between them at all. I will continue to use both, but the Matrix will get the most use overall due to its...
  2. craiguitar

    Axe-Fx III Firmware 25.00 Public Beta (Cygnus X-3)

    I’ve left all my 100 or so presets as they were, due to the fact that even a soft reset would wipe a lot of settings out, such as GEQ settings, IC settings etc. What I’ve found is everything sounds just fine or even better than before with the old settings, so I can just get on with the business...
  3. craiguitar

    Axe-Fx III Firmware 25.00 Public Beta (Cygnus X-3)

    It would be a cool idea within Axe-Edit to be able to right click on any parameter in the amp block and have it 'set to default'.
  4. craiguitar

    Axe-Fx III Firmware 25.00 Public Beta (Cygnus X-3)

    I love the updates that just make everything sound somehow better without having to adjust anything, this FW is one of them. 👍
  5. craiguitar

    Best poweramp for Axe III (Goal: LOUDDDDD)

    The LXII is a great pairing because it's so transparent, especially compared to other valve amps. It's built like a tank, which is great, but it's very heavy. Also those who whinge about excessive fan noise won't like it a lot. The internal fans are loud, and that's understandable, they're...
  6. craiguitar

    The importance of Mono for live guitar playing

    Yes, I no longer ever use the enhancer either. I'm finding it's punchier sounding enough without it. I unashamedly run OUT 1 Stereo to FOH and OUT 2 Stereo to a power amp & a Stereo cab, and will continue to do so, as I'm the only guitar player in my band, and we run our own FOH.
  7. craiguitar

    The importance of Mono for live guitar playing

    Same here, it works great, I have a stereo cab on stage, and a separate stereo feed to FOH, panned hard L/R. Sounds huge. All the internet troll talk of it not working or phase issues, or not being any good if you’re not stood slap bang in the centre of the stereo field, well that’s all total...
  8. craiguitar

    Best poweramp for Axe III (Goal: LOUDDDDD)

    I have an LXII and a Matrix GT1000FX. Sound-wise I genuinely can’t tell the difference between the two. They are both very neutral sounding, which is kind of the whole point. I can’t fault either amp. 👍
  9. craiguitar

    Legacy Vs. Dyna-Cabs

    Legacy for me. I only use one cab IR across all of my presets, and it's one I shot of my own 4x12. Obviously that wouldn't be possible with Dynacabs. I'm using the IR through FOH/Monitors, and using a power amp and my real cab for stage.
  10. craiguitar

    New stage trends...

    Probably also due to the fact that there are hardly any bands anymore, certainly in the mainstream anyway. Most live acts are pop/EDM, and the stage would more likely consist of 'dancers' if anything.
  11. craiguitar

    Axe-Fx III Firmware 24.03 Release

    +1 That's a good idea.
  12. craiguitar

    Axe-Fx III Firmware 24.02 Release

    I use the Brit Silver model across many of my presets, and it’s one of my go-to models. So this one is intriguing. One thing I needed to do here was increase the amp level on all those presets. Once done, it’s sounding great (not that it didn’t previously). I Wonder what the sauce is here.…
  13. craiguitar

    Axe-Fx III Firmware 24.01 Release

    It happens on ALL presets, and even with no signal present. It happens on most scene changes too, but it‘s not an issue on 23.05.
  14. craiguitar

    Axe-Fx III Firmware 24.01 Release

    Whatever it is, it definitely ain’t nice. Same with 24.00 too. I rolled back to the previous FW and all is well again.
  15. craiguitar

    Axe-Fx III Firmware 24.01 Release

    This is one, but all of my own presets appear to do it now.
  16. craiguitar

    Axe-Fx III Firmware 24.01 Release

    Yes, scene change now has a pop sound.
  17. craiguitar

    I’m never using a 3rd party IR ever again. Ever. For anything.

    I've tried Dynacabs multiple times, with a sort of 'assumption' that I'll gain some magic improvement, alas just can't get on with them. I still revert back to my own IR's that I shot of my own cab, supplemented with the LT TV mix, and I'm done! I use that for all my presets and can't seem to...
  18. craiguitar

    Matrix 1000 vs Palmer 402 vs BAM200 vs SD PStage 170

    I’ve owned and used a Matrix GT1000FX for years, but recently purchased a Fryette LXII as an alternative power amp. after alternating between the two for several months, I have to say, there’s very little to choose between them Sound wise. They both simply do an awesome job. For me it’s only...
  19. craiguitar

    FC-12 Preset Toggle ('BAK' function)

    Yes, it's implemented. Works well.
  20. craiguitar

    Thinking of Switching from VHT 2:90:2 to Solid State

    I've always run my setup with presets similar to the second screenshot you posted. A single effects chain, tapping off to OUT 3 before the cab block. I don't see any benefit to creating two seperate effect chains. From OUT 3 I've been using a Matrix GT1000FX into a real Marshall cab with...
  21. craiguitar

    Post Your Axe-Fx III Rigs Here!

    Bit of an update, as I've added an LXII as an alternative to the Matrix, if required. Having tried both, I can say that there's barely a noticeable difference sound-wise between the two. I'll continue to use the Matrix wherever possible, but as i've had it now since around 2011 (i think), it's...
  22. craiguitar

    Direct to FOH

    I use the same cab block for all my presets to FOH, and i have put significant hi/lo cuts on that block. I don't do any EQ on the Output 2 signal to my SS amp/real guitar cab on stage, because it's guitar speakers and they are already voiced 'mid-rangey'. Quick story: I played a festival last...
  23. craiguitar

    Input Clipping Thread

    They’re the Transitions.
  24. craiguitar

    Axe-Fx III Firmware 22.00 Public Beta #2 (Beta 7)

    Depends on a lot of other tonal factors, what type of guitar tone, and what type of cabinet etc. I've used Chinese made V30's for years, they sound amazing, and I shot some killer IR's with an SM57 in front of them. They cut through nicely, but in a midrangey musical way. I did have some older...
  25. craiguitar

    Why do you use FRFR with your Axe-Fx?

    Both: FRFR to FOH & monitors (and also for headphone use and practice at home). Power Amp & real guitar cab on stage for self monitoring, feel, trouser-flapping goodness. It's not an either/or situation for me, both at the same time works great!
  26. craiguitar

    What Dyna-Cab Models Would You Like to See Added?

    Purely for my own needs, Marshall 1960V, 1936V, 1922. To match my real cabs when using FRFR & SS AMP & CAB simultaneously. 😉👍
  27. craiguitar

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    Same here, red/green is a real problem for me.
  28. craiguitar

    Input Clipping Thread

    I had mine set at default 50% for ages, but now as I see it’s clipping I lowered it to suit my EMG equipped Luke guitars, to around 30%. All OK, then I tried my LIII which is the loudest guitar I own by far, and i had to drop it down to around 15% and it still clips occasionally when I engage...
  29. craiguitar

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    She prefers distance. About a mile or so. 🤣
  30. craiguitar

    Question regarding amp block speaker settings.

    I understand this predicament, albeit not a major thing, it's more a case of looking for the proper approach for your setup, and that may involve some compromise. I use 'Output 1' to FOH and 'Output 2' to Neutral SS Power amp and real guitar cabinet. What I currently do with the Impedance...
  31. craiguitar

    Wish Impedance Curve Global override (existing presets)

    I'd like for the Global Impedance curve setting to work on all existing presets as well as new ones. Then I can choose a curve that suits the cab I am using on a given gig. Some gigs I will take a smaller cab, and larger gigs I might take a 4x12 etc. So to save dialling in ALL presets prior to...
  32. craiguitar

    Axe-FX III with Real cab vs. the Real thing

    I believe that was something that was being looked into, where the connected cab could be 'measured' by the Fractal device to ID it's IC. This would involve something similar to the procedure for shooting an Impulse Response at a guess...
  33. craiguitar

    Axe-FX III with Real cab vs. the Real thing

    Any tips on how to match the IR curve to the cabinet? Other than picking a curve that is from a similarly configured cabinet (i.e. 4x12 with v30’s), and also trying to find the LF resonance of the real cab, I’d be unsure what other measures to take.
  34. craiguitar

    Axe-Fx Firmware Version 21.02 Public Beta (Beta 2)

    I (almost) share Mud’s affection for Axe-Edit. Perhaps not quite to that extent though 🫣 Chiefly because in a pinch, I couldn’t edit using the front panel to save my life 🤣. Whilst in a beta though, it’s not an issue…
  35. craiguitar

    Matrix Gt1000 Cab connection

    I use a stereo guitar cabinet, which is of course not FRFR. I would have considered and FRFR cab on stage, but never found a suitable stereo option, so that put me off. However , using a real guitar cab (without the cab block) works very well.
  36. craiguitar

    A good alternative To Matrix Amps?

    Thanks for this, it makes sense. I've never been able to accurately lock onto the low res. frequency of by own cabs. I think I got somewhere close by ear, but you never know if your ears play tricks on you, so it's all guesswork.
  37. craiguitar

    A good alternative To Matrix Amps?

    I've had my GT1000FX since 2012. It's one of the older UK made ones, still going strong and built like a tank. It replaced the VHT 2502 and Mesa fifty/fifty i had used prior to that. It's been a stellar amp to have, and super light-weight too. Although I have no intention of selling my Matrix...
  38. craiguitar

    A good alternative To Matrix Amps?

    Couple of questions, 1. If I'm using FRFR (FOH & Monitors), and SS Amp and real cab simultaneously using one amp block, what would the correct settings be? The two settings in question being the impedance curve, and also the output setting (FRFR or SS amp+cab). 2. What if I have the same...
  39. craiguitar

    Axe-Fx Firmware Version 21.00

    True, We were all quoting that old cliche in 2008 about the Ultra.
  40. craiguitar

    Wish Setlist 'song list' picker - Alphabetical order option

    That would be ideal, if it's possible.
  41. craiguitar

    Er......Is the Axe lll now €3,499.00 in Europe?

    I recently upgraded from a Mk1 to a Turbo, and I thought the price was a bit steep, but if i'd waited 1 month longer to do that, it would have cost me another £300!. It's not likely to get any better any time soon, so if you're going to buy, do it now!
  42. craiguitar

    Wish Setlist 'song list' picker - Alphabetical order option

    It'd be nice to be able to see the master song list (picker) in alphabetical order, rather than having to use the search box or scan through the list to find the right songs to add into a new setlist. The search box works well, but all the same, an alphabetical list would be beneficial too.
  43. craiguitar

    Song Name Size in Setlist

    When it comes to songs with long names, it's necessary to get quite creative with naming them in setlists, without being too cryptic of course. Definitely a challenge in some cases. I really like the setlist feature though. It's working flawlessly for me at gigs, I'm no longer fumbling around...
  44. craiguitar

    Simplest way to load different Amp block -> Speaker settings? (Headphones vs Live use)

    I have one set of presets that will work in both situations without changing anything. 1. I used my power amp and cab to shoot a cab IR of my own cab. Applied plenty of LF/HF cut to the cab IR. Then used this IR in ALL my presets. 2. When playing live, I send the FRFR signal (with my cab IR) to...
  45. craiguitar

    Axe-Fx III Firmware Version 20.02 Public Beta (Beta 1)

    She thinks we've got tone now.... :p
  46. craiguitar

    Axe-Fx III Firmware Version 20.02 Public Beta (Beta 1)

    We know about the batch setter, but of course it'll only work if you want to set the same curve across all the selected presets. All my presets use the default curve for the amp/s in each preset, albeit with a tweak to the low resonance parameter. I think this would require going through each...
  47. craiguitar

    Axe-Fx III Firmware Version 20.02 Public Beta (Beta 1)

    Oh, I agree, it’s time well spent, I have a similar number of working presets. Maybe the RSI and carpal tunnel from all those mouse moves/clicks will pay off!
  48. craiguitar

    Axe-Fx III Firmware Version 20.01 Public Beta (Beta 2)

    I wouldn’t have that as a prerequisite though. I have the amp blocks in all my presets set as SS PA + Cab, but I still send an FRFR signal to the PA and monitor in a live setting.I have to settle on one, and in the end, I preferred the SS PA setting. i would still like to use the speaker...
  49. craiguitar

    Axe-Fx III Firmware Version 20.01 Public Beta (Beta 2)

    Indeed, this is an important one.
  50. craiguitar

    FC per-preset overrides: update to 20.00 changes controlled fx block

    I'm still having issues with overrides now, I've fixed/re-saved them but occasionally they appear to 'forget' their settings and default to another effect, or sometimes in any given preset, the effect is not even visible as available on the FC at all. Sometimes going to another preset then back...
  51. craiguitar

    Axe-Fx III Firmware Version 20.00

    Unusual behaviour with FC overrides: so, easier to show you, sorry for the wobbly phone footage, See how when i click on the override switch, the effect type starts on 'Amp1' and then quickly corrects itself? I tried re-installing an older FC+system backup but it displays the same behavior.
  52. craiguitar

    FracTool - for power users only

    Anyone else having trouble installing this version (3.72)? Firstly it downloads the application rather than just installing it like usual, then secondly the installation fails. It says the application is open even when it isn't, and won't let you proceed any further.
  53. craiguitar

    Axe-Fx III Firmware Version 20.00

    I used Axe Edit. Go to the parameter and press shift and right click. Then select the presets you want to change.
  54. craiguitar

    Axe-Fx III Firmware Version 20.00

    Not really. I Just batch reset the amp block speaker drive setting in all my presets to 2.0, then I tweaked some of my presets to taste. Job done!
  55. craiguitar

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    When I rolled back to the previous official release, it still carried these FC errors back, so I needed to reinstall my FC backup to correct it.
  56. craiguitar

    Why are so many people not relying on their ears anymore?

    Because my ears are done. My hearing loss (attenuation of certain frequencies) coupled with nasty tinnitus means it's very difficulty to distinguish a lot of subtle variation. I always update the firmware, but with audio improvements I've rarely heard any night & day changes in the sound of my...
  57. craiguitar

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    Confirm I’m seeing errors similar to these.
  58. craiguitar

    Axe-Fx III Firmware Release Version 19.08

    It’s odd indeed, I have noticed zero difference between this and the previous FW. Not a thing! But if everyone is saying it’s better, then I’ll gladly take it!
  59. craiguitar

    Axe-Fx III Firmware Release Version 19.08

    Would this update necessitate re-setting the Low res frequency of my real cab all over again, or is it good as-is?
  60. craiguitar

    Axe-Fx III Firmware Release Version 19.06 Public Beta

    I've done a similar thing, with an 'escape' button to my regular layout, in case at gigs the band decides to go 'off piste' with the set.
  61. craiguitar

    Axe-Fx III Firmware Release Version 19.06 Public Beta

    I have got around this by adding a switch which takes me back to my default layout. Then, I select the song that's been requested (as usual). Afterwards, I flip back to the 'Setlist' layout, and rather neatly, it goes back to the position in the setlist I was previously at, so i just select the...
  62. craiguitar

    3 Live EQ Tips the pros use to take tones to the next level - Fractal Friday with Cooper Carter #24

    Very informative. The Cab Block Low/High cut idea made me go and check my settings, only for me to realise I was doing that already. Pleasing to know I was on the right track with that.
  63. craiguitar

    Sounds boxy

    Same here because I’ve always used both at the same time, so I was always torn on which setting to use.
  64. craiguitar

    Axe-Fx III Firmware Release Version 19.05

    great explanation, thanks! That will be useful on my presets that feature a virtual capo 👍
  65. craiguitar

    Axe-Fx III Firmware Release Version 19.05

    Yeah, I'm a bit baffled by what Scene Ignore is for. Perhaps a tutorial from @2112 would show how it can be used...:D
  66. craiguitar

    Axe-Fx III Firmware Release Version 19.04

    Similar issue, the other night with 19.04, out of nowhere the unit appeared to have bricked, all the output lights were permanently on, no sound, and unable to change presets. I had to reboot the unit. It's a III Mk1, with FC12 connected, and I was using Axe-Edit (latest version) at the time...
  67. craiguitar

    Axe-Fx III Firmware Release Version 19.02 Public Beta

    I installed the previous FW and the backup I’d done prior to the update. Rebooted and all OK again.
  68. craiguitar

    Axe-Fx III Firmware Release Version 19.02 Public Beta

    Same here, I use two Stand In Switches, set ti toggle up & down through Scenes, and they don't work with the Beta. Gone back to 19.01 also...
  69. craiguitar

    Axe-Fx III Firmware Release Version 19.02 Public Beta

    OK, perhaps I got ahead of myself a little. Got all excited there after years of waiting....dammit! So, I have banks of 5 presets. Simple enough. I need each button (in each bank) to be able to toggle back and forth to & from the previous preset (no matter where it was located) so, it might have...
  70. craiguitar

    Axe-Fx III Firmware Release Version 19.02 Public Beta

    Some long awaited FC updates there, much appreciated 👍 particularly the 2nd press to the previous preset. I’ve been wanting that one for years!
  71. craiguitar

    Matrix GT1000FX channel drop out issue.

    Yes, they always look after their customers. I have sent my GT1000 in on a couple of occasions down the years, once when the topswitch needed replacement and on the other occasion, a couple of the Mosfets needed changing. my amp gets heavy use week after week, and on the whole, it’s been great...
  72. craiguitar

    The CNFB Method

    I'm looking at the graphs going, "what's he on about, 'red' and 'blue'?" Then I remembered how colourblind I am, and how I just see graphs, consoling myself with the fact that I still wouldn't understand it anyway, but it sounds great!
  73. craiguitar

    School me on stereo

    The number one rule when it comes to using stereo in a live setting Is to ignore all those who tell you it doesn’t work or doesn’t sound any good. Ignore the hell out of them, and try it out for yourself. I have used full stereo for my rig for many years, and have also heard many pro...
  74. craiguitar

    Axe-Fx Firmware Release Version 18.03

    Is it me or is the boot time suddenly a lot quicker? 🙌
  75. craiguitar

    Axe-Fx Firmware Release Version 18.00 Public Beta

    Quick question about the Global Impedance curve feature. So, each of my presets uses the default curve that comes with the selected amp block. Pretty standard. Then I have adjusted the LF parameter in each preset to match that of my real cab. All good so far. Now, should I choose to take my...
  76. craiguitar

    Dark sounding presets

    I always thought the majority of factory presets are very dark/wooly sounding. They just aren't dialled in for me, my guitars and my playing style. Luckily I don't use them anyway, I create my own presets and they sound just fine, whether that's under headphones, or at a live gig. There isn't a...
  77. craiguitar

    Been thinking about getting a Matrix power amp but.....

    Yes, I've used several tube Power amps with the Axe-Fx, including a Mesa Fifty/Fifty, and a Fryette 2/50/2, before finally settling on a Matrix GT1000. With a Solid State Power amp, finding your cab's low resonant frequency is a prerequisite.
  78. craiguitar

    Axe-Fx III Firmware Release Version 17.00

    Just loaded up FW17 on my Mk1 On the FC the row of presets now flashes until one is selected. Is there a way to stop that happening?
  79. craiguitar

    Axe-Fx III Firmware Release Version 17.00 Public Beta 4

    Thanks for confirming. Seems to be a bug there.
  80. craiguitar

    Axe-Fx III Firmware Release Version 17.00 Public Beta 4

    Yes.
  81. craiguitar

    Axe-Fx III Firmware Release Version 17.00 Public Beta 4

    Just loaded up Beta10 to try it. Why does the FC now ignore the bank limits that are set? I have mine set to wrap from bank 1 to Bank 17 (where all my gigging presets are) but the FC12 still banks up or down 000 - 102. Also, the row of presets now flashes until one is selected. Is there a way...
  82. craiguitar

    Getting my cabinet "moving"

    Well that’s the thing that perplexes me too. if I set the curve to match a cab that I’m using on any given gig, then that will inevitably affect the FR signal I’m sending to FOH. i actually like the FOH receiving the sound of my 4x12 regardless of the type of cab I’m using on stage. To this end...
  83. craiguitar

    Axe-Fx III sounds thin, tinny, and anemic -- Power Amp?

    Yes, and obviously setting the presets to work with the cabinet properly (impedance curve). if the Axe doesn’t know what cabinet it’s ‘talking’ to, then of course it’s going to sound flat and anaemic. You need to make it wake up and that’s important.
  84. craiguitar

    Axe-Fx III sounds thin, tinny, and anemic -- Power Amp?

    Me too, always stereo, and never ever had a single issue of any kind. It always just sounds incredible, not only to me but the sound guy, and anyone in the FOH area that is remotely clued up enough to notice. I guess it’s just how well you set up your presets that counts for a lot.
  85. craiguitar

    Getting my cabinet "moving"

    That’d be great. It would be so easy to simply flip to the curve settings that suit the cabinet that’s being used.
  86. craiguitar

    Getting my cabinet "moving"

    So the way I'm understanding it is the fundemental parameter to adjust in the amp block is the LF. Say i'm using the same cabinet, would it be best to adjust all presets (Regardless of amp type) to this same frequency once it's been identified? My other issue is when I gig, generally I will use...
  87. craiguitar

    Lukather The Seventh One Patch?

    There are always the wonderful versions guitarnerdswe made which are more circa 1990 but are extremely useful, and nail the PCM70 delays. Thread 'Lexicon PCM70: Pan & Circular Delays' https://forum.fractalaudio.com/threads/lexicon-pcm70-pan-circular-delays.164461/
  88. craiguitar

    I’m new! Tips for running with a cab?

    Yes, I have that option too, which is nice in certain venues, but overall I prefer to have a traditional cab behind me, even though it‘s never turned up that loud.
  89. craiguitar

    I’m new! Tips for running with a cab?

    I use both FOH and amp/cab at the same time. all my presets are configured such that Output 2 (amp/cab) is located before the cab block and output 1 (FOH and monitors). This way I can treat the amp/cab as a kind of personal monitor for me and the band and choose how much of it I need volume...
  90. craiguitar

    FC Internal Firmware 1.11

    Hi all, Any updates on when we could expect a new FW on the FC's? These are the particular updates I have been waiting (hoping) for, both functions that the old MFC's used to do so well. 'BAK' function to toggle to/from previous preset. Fast 'Typematic' Bank Scrolling.
  91. craiguitar

    Axe-Fx III Firmware Release Version 16.00 "Cygnus"

    Perhaps because it was in mass use at one time, so it evokes some kind of sense that it‘s a useable and ‘pro’ type sound. The same applies to that awful auto tune robot effect that producers put on pop song vocals. They put it on there because it sounds like something familiar, and in vogue...
  92. craiguitar

    Power supply cable compatibility question? (New AXE FX III came without one.)

    I suppose when packing, they would need to know in advance which country/region the units were shipping to. Several times in the past when i've bought electrical items (Not Fractal I might add...), the wrong IEC cable was in the box, either a 2 pin US or European type, which obviously are no use...
  93. craiguitar

    Reminder for Europeans when using "Noise Reduction" in Input block

    Thanks for the info 👍
  94. craiguitar

    Reminder for Europeans when using "Noise Reduction" in Input block

    Interesting though about the AC line freq. parameter in the amp block. I’d never really payed any attention to that parameter before. Is there a reason it’s set at 60hz by default? I’m curious, though there’s no ‘obvious‘ difference sound-wise, should we in 50hz countries be setting it to 50hz...
  95. craiguitar

    Live Workflow for Cover Bands - Song Lists vs Complex Presets

    I have individual presets for certain more complex songs, and generic presets which work for multiple ‘more basic‘ songs. I leave them all in the preset positions, and over time I can remember their locations on the FC. A lot of the time, my band don’t stick rigidly to a set list, and we may...
  96. craiguitar

    Any EBMM owners?

    I've always been a fan of slim v necks, and my Luke 1 and LIII are great examples, and the slinky feel, for speed and efficiency they can't be beaten. However, when playing for extended periods, I seem to prefer the slightly beefier Luke 2's, for example when doing gigs etc. I find them less...
  97. craiguitar

    Any EBMM owners?

    My Luke 1 and LIII necks are actually almost the same, very slim with pronounced V. There is very little difference between them. My two Luke 2’s have much chunkier necks, albeit still a v shape. Even they are noticeably different from each other! It seems that the neck profiles and thickness...
  98. craiguitar

    Axe-Fx III 16.00 Beta 10 "Cygnus" Firmware - Public Beta #7

    Yeah it’s going to be a long wait. The only upside right now, I’m able to freely mess around with the beta, I keep it loaded up without having to cycle back for gigs etc. Here in the UK, 36% of the population have had at least one dose of vaccine, so that’s pretty decent, as in mainland Europe...
  99. craiguitar

    Axe-Fx III 16.00 Beta 10 "Cygnus" Firmware - Public Beta #7

    Really? That seems unfathomable/hard to imagine. we are in full lockdown here still, (UK), and there’s the threat of a third wave heading over from mainland Europe. It’s looking increasingly bleak at this point. Needless to say, the gig diary is well and truly empty.
  100. craiguitar

    Axe-Fx III 16.00 Beta 10 "Cygnus" Firmware - Public Beta #7

    What is this ‘gigging’ of which you speak? Not seen the likes of it for a year now... #lockdown. 😩
Back
Top Bottom