Search results for query: *

  • Users: Gizmo
  • Content: Threads
  • Order by date
  1. G

    Persistent control switch state when switching back and forth between scenes

    I know that I can set the control switch value as on or off in a given scene. Is there a way to set it so it doesn't reset when switching back and forth between scenes like other blocks? Example, I'm in scene one and turn on delay. I then go to scene two and when I go back to scene one, the...
  2. G

    Forum Shutdown ... oh, the Horror!

    Just got home from long day at work and see the forum is about to be shut down for the weekend. Any one else quickly scanning forum to catch any tidbits they might have missed? I just downloaded the FF IR pack to try this weekend. I've got lots of tweaking to due before big gig next weekend...
  3. G

    Wish More Channels?

    Sorry if this has been discussed elsewhere, but I didn't find it when searching. So I'm setting up some new patches using Axe-Edit and the Channel selector lists A B C D. When you click the drop down arrow, it also lists Channels E and F. You can't access these (grayed out) nor can you select...
  4. G

    AxeFx responding intermittently to IA

    I've got a preset with drive block 1 engaged (scene 2). If I switch to another scene and back and then press IA for drive block X/Y about 1/4 the time it doesn't change. DRV1 XY shows up on the MFC screen and the AxeFx MIDI In LED lights up, but the drive doesn't change to Y, but stays on X...
  5. G

    1st preset defaults to "Scene 8"

    OK, probably did something in the MFC settings to cause this, but I can't figure out what I did wrong. I was reworking some presets today and decided to setup my MFC so that it was Bank size 0 - just using scenes and IAs. I put my main preset in 001 (with +1 offset) and now everytime I pull it...
  6. G

    Wah auto-engages when not plugged in

    Have Wah (ext 2) set to auto engage. When it isn't plugged in and I'm using MFC, the wah block will occasionally engage and my preset will instantly get that cocked wah sound. I have to go to wah block and bypass it from front panel. I guess something is triggering it, but no idea what it...
  7. G

    AMP Resolution

    From the manual AMP block Resolution Presets which use a single amp block run in high-resolution mode, utilizing an entire processor. This provides greater fidelity and resistance to aliasing. This mode is automatic and is selected whenever there is only one amp block in the layout grid. Adding...
  8. G

    Bypass state on/off between patches - carry-over pitch shift?

    Not sure how to do this, but if I'm using the pitch shift block in a patch to drop tuning down 1/2 step, is there a way so that the bypass state of block carries over when I switch to a different patch? So I'm playing rhythm down 1/2 step and then switch to a lead patch. Right now I have to...
  9. G

    Volume pedal and changes between patches

    Got a gig tonight and decided to go back to using a volume pedal for my stage/monitor volume. Output 1 is to FOH and Output 2 is to my monitor. I've got an expression pedal in external 1 set to CC #12 - output 2 volume. Works fine without changing volume to FOH. I haven't used this setup in...
  10. G

    Output Boost/Pad

    In I/O --> Audio there is the Output Boost/Pad option. Why is it called Pad when you can only boost the output (can't set at negative dB)? I usually run Output 1 XLR direct to FOH, but our main mixer doesn't have a pad button, so I have to use an adapter (XLR to 1/4) and plug into line in...
  11. G

    Master on Fender Amps - 9 or 10?

    On my Ultra, setting the MV to around 9 was considered wide open on Fender amps (I might be mistaken about that number). Is that still the same on II? Or do I go all the way to 10? Just curious if it changed in new algorithms.
  12. G

    MFC and Axe II - display offset

    I'm setting up MFC to use with my Axe II and can't get the display offset to work. MFC has been updated and using ethernet cable connection. Go to setup and change display offset to 1, but 1st patch still says X000 instead of X001. Any suggestions?
  13. G

    Setup of Volume pedal - volume jumps when switching patches

    OK - I've got a Mission EP plugged into Exp pedal 1 on MFC. It works fine to control volume on output 1. Here's the problem - I'm playing a patch with the volume pedal at about 1/2 way. When I switch to another patch, it jumps up to full volume until I move the pedal and then it jumps back...
  14. G

    Show name of preset with BankStyle None

    One feature I like when using my POD XT or X3 as a midi controller is that when I go up or down to the next bank, it shows the preset name and then lets me select it before it switches. Example - the X3 floor board is setup for 4 presets (A,B,C,D) per bank. I'm playing preset 1C and want to...
  15. G

    Delay settings (Pete Thorn)

    I've been trying to get my delay settings for leads to sound right, but I'm having trouble. The only parameters I really seem to understand are Time, Feedback, Tempo, and Mix. Right now, I don't have a dedicated foot controller for adjusting the mix, but wanted something I could kick on when...
  16. G

    1 Loose screw and 10 that are super glued?

    Crap! I opened up my rack today and noticed that the right front handle on Axe-Fx is dangling. The screw has come loose and is rattling around inside the Axe-Fx case. This is the same handle that was loose when I received my new unit. Back then, I was told to open case and tighten the screw...
  17. G

    Power Section same in old Reactor and new FRFR?

    Anyone know if the power section is the same in older Reactor series (50W - not 18W) and the newer active FRFR cabs? If I get a chance tonight, I'm going to try running my new passive wedges as external speakers with the older Reactors. Will compare to active FRFR later this weekend - left my...
  18. G

    HiRes vs LowRes - Any real difference?

    I'm auditioning some of the Red Wire cabs and was wondering about the difference between running two separate mono cabs vs. stereo. I can't seem to hear a real difference between hires and lowres, but have been running hires anyway. If memory isn't a problem, do most people recommend running...
  19. G

    Copy effect block to another preset?

    I thought that you could do this, but couldn't find it in the wiki. Can you copy a block from one preset to another (not using editor, just Axe-Fx)? Example, I have a reverb block that I like and want to add it to a new preset I'm building. Can I copy and paste the block or do I have to just...
  20. G

    Global Amp settings

    Is there anyway to erase the 10 global amp presets or do they just have to be overwritten? I don't remember having a problem before, but say I want to set Maz 38 as my global 1 amp. I have my settings exactly like I want them and then turn the global to amp 1. The amp switches to tube pre and...
  21. G

    How to backup presets (with your eyes closed)?

    OK, my LCD screen is now dead (glows green, but no lettering - like contrast set to 0%). Going to send it in today for repair, but would like to backup my presets. I'm looking at the old editor and am trying to find a way to do it, but can't remember how. For some reason, I think that you...
  22. G

    Any success in a strings/orchestra synth?

    My band wants to play a song from 10,000 Maniacs Unplugged and it doesn't have much guitar (except for a cool violin solo that I'll try to replicate). Anyway, I thought that strumming along on acoustic would be rather boring and thought I might try to tackle the background string section...
  23. G

    Help! No display!

    Grrr ... finally got the kids/wife out of the house and was looking forward to at least a few hours of playing and trying to program some new presets. I turned on Axe-Fx and no display! LED's work fine and I can hear sound, but no display. I actually had this sort of happen about a week ago -...
  24. G

    POD X3 Live updated MIDI for control of Axe-Fx

    Just got my Ultra the other day after using POD XT/X3 for years. Was about to use an old X-15 Ultrafoot from my music closet (I never throw anything away - still have the SGX 2000 Express!) when I found that Line 6 has the new firmware for X3 that allows full use of MIDI. Wanted to give a...
Back
Top Bottom