Search results for query: *

  1. Enzo Sutera

    Friedman smallbox plexi channel would be great

    The plexi channel on the Friedman Small Box is a sort of "castrated plexi". It has a Master Volume (bad) and some snubbers on the plate and cathode resistors limiting precious high frequencies and overtones (very bad). Without getting too technical about it: enjoy the Plexi models we have...
  2. Enzo Sutera

    professional touring experience with AX8

    If you are used to mic your amp off-stage and going IEM the AX8 will perform egually good if not better. Keep it simple: 2-3 Amp sims and the same IR for all. Choose the IR accordingly, this will be your main sound. Keep your sound mid-focused applying low and hi cuts (the cab block has them...
  3. Enzo Sutera

    Using External Switch to Switch Between Scene 1 and 2

    If you assign an external switch to SCENE SELECT it will toggle between Scene 1 and 8 An hidden feature that works like Scene 1/2
  4. Enzo Sutera

    LED in expression pedal powered from AX8

    The resistor would be there to limit current not voltage... but since my guessing is the AX8 is not able to provide 20 or even 10mA you do better omit it. The led I posted is the only one that works, it will not be insanely bright but just bright enough. No problem running a 3V led at 5V at...
  5. Enzo Sutera

    LED in expression pedal powered from AX8

    Yes it´s possible but you need a very bright led and no resistor. You have to put it in series like this: tip - led - switch - ground - sleeve. I´ve had luck with this led: http://www.taydaelectronics.com/leds/round-leds/3mm-leds/green/led-3mm-green-water-clear-super-bright.html
  6. Enzo Sutera

    Anyone try this?

    I do it all the time using the AX8 alone and one of my real amps. I managed to separate the stereo FX Loop into 2 independent ones. I call it 6CM.. 4 cables method plus line out from real amp into the AX8 back again for IR and then to FOH. No need to mic my cab anymore. I´ve to start a thread...
  7. Enzo Sutera

    Wish Maxon SD9 Sonic Distortion

    I´ve got the schematic including all major mods if needed...
  8. Enzo Sutera

    Thinking About buying ax8 or fx8

    Go for the AX8 you will not regret it. It offers so much more and it works like a charm in front of a clean amp. Just do like philipacamaniac suggested using Output 2 and the "12dB Boost/Pad". The hiss issue is only audible in front of a pretty distorted amp and it´s actually not that bad...
  9. Enzo Sutera

    First recording session with 7.01 Video

    Thanks! Are you using a strat? Which pickups? I´ve Suhr FL Classics on mine and they are pretty vintage in output, I use to roll the Tone pot at 7 all the time. In the first 30 seconds of the clip the Volume pot is rolled back as well, then I max it out. Make sure the Bright switch on the Amp...
  10. Enzo Sutera

    First recording session with 7.01 Video

    Many thanks guys! The preset is nothing really special. Just the stock 1987X Treble model into the Triptik 1x12" cab. Gain on 6, Middle and Presence pushed a bit. Stereo Delay and Studio Reverb. The Triptik cab is not what a Plexi is calling for but it works for me. It offers some nice thick...
  11. Enzo Sutera

    First recording session with 7.01 Video

    The trusty 1987 Plexi never sounded so good. I feel I´ve to dig more into the strings after the upgrade like I would on the real amp. Thumbs up!
  12. Enzo Sutera

    Wish Assign Scene 1/2 Toggle to External Switch

    You can achieve Scene 1/8 Toggle if you assign an external switch to Scene Select. It´s an hidden feature and almost the same as Scene Toggle 1/2. I´ve built a switch pedal with two separate outputs, one connects to the AX8 and the other to my amp. This way I can switch the channel on the Amp...
  13. Enzo Sutera

    Wish Maxon SD9 Sonic Distortion

    Anyone wishing it so bad like me?
  14. Enzo Sutera

    Questions about AX8 v FX8

    The AX8 works good in 4CM and it´s pretty neutral considering the double AD/DA conversion involved. It only adds some HISS in front of a distorted amp, nothing you can actually ear in a live environment but it´s there. In front of a clean amp it´s pretty quiet. HUM can be present if not using...
  15. Enzo Sutera

    Amp, Cab & Effect Wishlist

    I know.. since Badger Amps are already there it would be great to have just one High Res mix of that Cab. The Veteran 30 is my go-to speaker, I like it far better than the Vintage 30
  16. Enzo Sutera

    Amp, Cab & Effect Wishlist

    Suhr Badger 1x12 Cab with WGS Veteran30 Maxon SD9
  17. Enzo Sutera

    Axe going acoustic

    Thanks mate. Sorry but I´m not into that sound anymore.. I´ve got some complaints about sounding too 80s :mad:
  18. Enzo Sutera

    Axe going acoustic

    I use these 2 IRs I´ve made out of an old Martin Dreadnought. Basically they add some deepness and overtones to my little Martin 0018. Dont know if they are going to work with another guitar/pickup but worth a try. Pan them hard left and right in the cab block and mix to taste, I woudnt go past...
  19. Enzo Sutera

    Axe going acoustic

    Many thanks! I´ve never stopped using the Axe for recording. I use to take it with me at my workshops as well to demostrate my studio sounds. Time to get an AX8 for live use I guess ;)
  20. Enzo Sutera

    Axe going acoustic

    1971 Martin 0018 with LRBaggs M1A into AxeFxII
  21. Enzo Sutera

    Fx8 modes

    Exactly my thoughts.. without an external midi pedal all is going to be pretty limiting, also considering the FX-8 will have 2 Exp Pedal ports only. A pity really.
  22. Enzo Sutera

    Coming Soon

    I mean the "exp pedal" outs to control internal fx parameters, on/off states.. NOT the "relay" outs to switch amp channels
  23. Enzo Sutera

    Coming Soon

    These are great news! I´m ready to fractalize myself again then.. hope soon ;) A pitty it has 2 exp pedals ports only.. do wah and toe switch and you are out of controllers, but I think I could live with it. An IR loader block would be awesome ;)
  24. Enzo Sutera

    Anyone interested in a German Axe Fest?

    Wenn es in Bayern statt findet, bin ich gerne dabei.
  25. Enzo Sutera

    Axe-Fx II Firmware Version 8.00 Up

    The tuner works great now, on the MFC as well. Many thanks!
  26. Enzo Sutera

    Am I one of the few Fractal Artists who uses the AFX II for Everyhing?

    I´m one.. all my studio works are done with the Axe and so most of my live sessions. My amps are still here for nostalgia.. I use them live with a couple of stompboxes when I want to feel somehow "old school". But I usually end using the Axe for almost anything. The new reverb is so nice I´m...
  27. Enzo Sutera

    Really At A Loss With v7

    Sorry guys but I really dont get it. Every firmware upgrade is a step forward imho, making each amp model closer to its real counterpart. When was the last time you played a "real" amp? V7 amps are spot on! If you dont like a model after an upgrade move to another one! You have got so many...
  28. Enzo Sutera

    Tip for Matrix users

    If you have not access to a real amp to make comparisons no way you are going to feel the difference. Sorry. Our ears get used to everything we play and it becomes very hard if not impossible to make decisions based on pure air. Not to mention if you use to play at home alone you are likely...
  29. Enzo Sutera

    Tip for Matrix users

    You´re absolutely right. To put it in simpler terms: the tweaked settings let the model react with the actual cab in the same way the real amp would do. As pointed out the effect is pretty apparent as you compare the model to the real counterpart.
  30. Enzo Sutera

    Tip for Matrix users

    The GT800 is definitely flatter than the GT1000/GM50.. I dont have mine anymore, I liked the GM50 transient attack a tad more. I can only suggest you to do an A/B test with a real amp thru the same cab, if there´s a difference you will hear it.. the models on the Axe are very accurate after V7...
  31. Enzo Sutera

    Tip for Matrix users

    Yes I do. I dont use many amp models thought. A classic Fender clean, an hot rodded Marshall kind of tone, sometimes a Vox.. it´s all about recreating the real amp feel. You will not realize it until you compare the model to the real thing. Anyway these are the sounds I´m after: G66 - ENZO SUTERA
  32. Enzo Sutera

    Wanted: Amps to Model

    I´m not sure, sincerely I never cared about the PT100, but I think it should be even more Marshally voiced.. so try a Marshall tonestack
  33. Enzo Sutera

    Tip for Matrix users

    I use IRs of my Cabs powered with the Matrix. The IRs contain the Matrix response then, at least the static one.. but your point makes sense. Anyway it sounds "real" on my studio monitors too.
  34. Enzo Sutera

    Tip for Matrix users

    During retweaking of my presets for V7 (biggest step forward imho) I found something interesting.. I´m using a Matrix GM50 into real cabs but the following applies to the GT1000 as well. As already pointed on the forum, later Matrix power amps tend to infatuate somewhat the speaker/cabinet...
  35. Enzo Sutera

    Wanted: Amps to Model

    After V7 I´m getting closer with the CA3+ rhythm model. Try lowering the INPUT TRIM to 0.350 and the TRIODE1 PLATE FREQ to 3000 Hz Still not the same but closer.. I sent Cliff the OD100 schematics sometime ago.. He´s right about the "3+ into a Plexi power amp" thing, anyway there are some tweaks...
  36. Enzo Sutera

    suhr badger in 7.00

    The 35 sounds pretty much like the 18 with more headroom, it actually sounds bigger which is good imho.
  37. Enzo Sutera

    suhr badger in 7.00

    I´d wait for the final release. BTW Cliff wrote me that increasing the low cut to 220 Hz sounds closer
  38. Enzo Sutera

    suhr badger in 7.00

    I already replied on this thread that it´s going to be the 18. The final fixed version should be released soon I guess, Cliff is working on it.
  39. Enzo Sutera

    suhr badger in 7.00

    You´ll love it more and more when Cliff releases the fixed version! The Badger is a work of art. Everytime I plug into it I have to ask myself: how can this thing sound so fenderish with its EL84 based power section? The gain knob actually works like an amp selector: Fender-Vox-Marshall! Have...
  40. Enzo Sutera

    advice needed: anyone else getting pops when engaging their drive blocks?

    yes I do.. before 7.00 switching was silent though
  41. Enzo Sutera

    So what's next?

    This is actually my biggest dream, an "amp builder" with actual component values. It´s in part already possible providing you understand/know which component of the circuit some advanced parameters are modifying. The Axe is a great developing tool in this sense. Each time I´m building or modding...
  42. Enzo Sutera

    suhr badger in 7.00

    Thanks to kerrlehr and vAmp for the kindly words.. I really appreciate it. It´s always good to know your work means something to someone ;) It doesnt get any better than John Suhr. He is a real guru and a big font of inspiration for what I do.. on pair with Leo Fender in my book, go figure. I...
  43. Enzo Sutera

    suhr badger in 7.00

    Well.. I finally found the time to play with the Model and compare it to a real one. I´ve found a couple of mistakes. I informed Cliff. John Suhr wrote me they will work together to let it sound at its best. I repeat it here so that everyone can read it and maybe I stop receiving tons of...
  44. Enzo Sutera

    The history of Axe Fx so far.

    Standard. Here the Ultra: Enzo Sutera guitar improvisation live - YouTube Enzo Sutera & Salvo Meccio - Shapes - YouTube
  45. Enzo Sutera

    The history of Axe Fx so far.

    Yes. I still remember at the very beginning it was a pain to program and make it "feel" right.. later firmwares changed that though. Anyway nothing compared to the II, this one sounds right out of the box! Here a couple of live videos from that time: Enzo Sutera live at the...
  46. Enzo Sutera

    The history of Axe Fx so far.

    Thanks! Axe Standard, Firmware 4.00 or 5.00 dont remember exactly, direct to the desk, no plugins.
  47. Enzo Sutera

    The history of Axe Fx so far.

    First was the Standard, some months later the Ultra and so on.. I had the luck to get one of the very first Standard back in 2007. It used to sound like this: http://www.enzosutera.com/axefx%20clips/session1.mp3 http://www.enzosutera.com/axefx%20clips/session2.mp3...
  48. Enzo Sutera

    suhr badger in 7.00

    It´s a 18. I´m the one who provided the schematic to Cliff
  49. Enzo Sutera

    What speakers for Matrix+Guitar Cab?

    Take a look at the Eminence Tonkerlite, best of both worlds imho and you will save tons of weight as well. I use the GM50 with an oversized 2x12" open back and couldnt be happier. If it MUST be ceramic then check the Tonespotter
  50. Enzo Sutera

    Suhr Badger 35 - Is it possible with the AxeFX II?

    I´ve sent the schematics to Cliff ;)
  51. Enzo Sutera

    Suhr Badger 35 - Is it possible with the AxeFX II?

    Hey Cliff I reverse engineered the amp recently and have a schematic. Please let me know if you need it! I have the OD100´s one as well ; )
  52. Enzo Sutera

    Suhr Badger 35 - Is it possible with the AxeFX II?

    Sure you can match EQ say an AC15 to emulate the Badger frequency response.. but dynamic is something different and we are speaking here about an amp that is way more dynamic, organic than a Vox. Not to mention its design with the dual Gain pot allows to set it from sparking clean to blistering...
  53. Enzo Sutera

    Tuner Accuracy

    +1
  54. Enzo Sutera

    Why no Fender Tweeds?

    +1 on everything but another high gain sim.. and Suhr Badger would be killer as well ; )
  55. Enzo Sutera

    tuner fixed???

    It´s actually the only thing that bothers me about my Fractal rig.. the MFC tuner is totally unusable on almost every string, the Axe display is very fine though
  56. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Maxon SD9 cloned!

    yes you are right.. my mistake I always loved this kind of fast chorus.. a slow one sounds too poppy to me
  57. Enzo Sutera

    Matrix GM50 Review

    I was told the GM50 IR is not working.. something went wrong with AxeEdit. Sorry. This one should work.
  58. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Custom Audio OD100

    I was told the IR is not working.. something went wrong with AxeEdit. Sorry. This one should go.
  59. Enzo Sutera

    Matrix GM50 Review

    If you want to ear the sonic difference between the GT800 and the GM50/GT1000 load the 2 IRs below. Same Cab, same mic position and mic preamp, only the power amp changes. Anyway bear in mind that the IR doesnt capture the attack of the amp, only the frequency response.
  60. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50

    Sorry, I have to correct myself: the Axe Looper can do pretty much everything "I NEED"
  61. Enzo Sutera

    Matrix GM50 Review

    I´m sure Matrix will chime in with better details.. anyway I didnt try the GT1000, but it should be "voiced" as the GM. The GT800 is voiced more on the flat side and has a softer attack. It´s not a night & day difference but it´s there. That being said the biggest difference is the amount of...
  62. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50

    Yes it´s the Axe looper. You can do pretty much everything with it! I´m a Fractal user since 5 years and used to be an FRFR guy 4 years long.. sure I´ve got great tones out of it but I always missed some interaction, dynamic control over the sound.. feedback.. the Matrix paired with a real cab...
  63. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Custom Audio OD100

    Yes you are right. The OD-100 Standard was the only one I´ve owned and reverse engineered. The Shiva is very close. Both are actually hot rodded JCM800s
  64. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Fender Twin

    Many thanks to everyone! Yes I use this rig mostly in the studio and live when I´m not going with one of my own custom built tube amps.. for the biggest stages I use a 2x12" with Tonkerlites
  65. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Custom Audio OD100

    As always.. it´s a matter of taste. Personally I´m not a big fan of 4x12s.. an open back 1x12 or 2x12 suit me best, less phase issues, bigger open sound.. You can try my IR I attached below. Pair it to the 1x12 EMI OPEN BACK (JM) for extra "in the room" feel. Set mic to NONE on both and let me...
  66. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - heavier lead tone

    Thanks! No problem at all. The Tonespotter with its 100.7dB sensitivity is a loud speaker, I mean a very loud one! You will never need more than 75Watts (its rated power) from the GM50 to compete with the loudest drummer. At 30Watts it is already insanely loud! Probably too loud for the purpose...
  67. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Maxon SD9 cloned!

    The fast Chorus you ear at the beginning and at the very end is the CE-2 Type one: Voices 8 - Rate 3.3 - Depth 80% - Mix 30% - LFO changed to Sine. It sounds close to the (famous?) TRI emulation I wrote years ago using the Quad Chorus Block, the latter sounds actually better but the Chorus Block...
  68. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Custom Audio OD100

    I hate it! It´s something I cannot control.. pretty ashaming :)
  69. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - heavier lead tone

    Since some asked for an heavier tone, here you have it. Please bear in mind I´m not a metal player! Hope you like it anyway ;) Tweaked Shiver LD model to mimic the Custom Audio OD100 lead channel. Settings: Drive 6.00 - Bass 6.00 - Mid 5.00 - Treble 4.00 - Presence 3.00 - Depth 2.00 - Master...
  70. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Custom Audio OD100

    Axe powered with the Matrix GM50. Cab is 1x12" open back with an Eminence Tonespotter, miked with an SM57. Tweaked Shiver LD model to mimic the Custom Audio OD100 lead channel. Settings: Drive 6.00 - Bass 6.00 - Mid 5.00 - Treble 4.00 - Presence 3.00 - Depth 2.00 - Master 6.00 - Tonestack...
  71. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Fender Twin

    Axe powered with the Matrix GM50. Cab is 1x12" open back with an Eminence Tonespotter, miked with an SM57. Double Verb (Twin) model set to light breakup. Gain 4.00 - Master 8.50 And here with a Maxon SD9 type Drive in front A little jam
  72. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50

    Nothing fancy.. really 1. The Tonespotter is very colored so no cab sim on it. I´ve done an IR of the cab powered with the Matrix and use it on Out 1 only. 2. I changed my mind recently and I´m trying to keep it simpler as it gets. I dont use many presets anymore. I´ve set my MFC as a big...
  73. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Maxon SD9 cloned!

    in the Twin I used the 6.01 stock settings.. nothing fancy. Drive 4.00 - Bass 4.00 - Mid 10 - Treble 5.00 (Bright on, 100pF cap value) - Master 8.50 I´ve only raised the low speaker resonance frequency to 92Hz to suit my cab and added a little bit of depth (2.00). When I´m playing live with a...
  74. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50

    many thanks! Here my review about the GM50: http://forum.fractalaudio.com/amps-cabs/51253-matrix-gm50-review.html
  75. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Maxon SD9 cloned!

    Well.. I compared the model to the original one and the difference is very subtle. Only problem is that the Tube Drive parameters dont follow the SD9 knobs, for example if you increase/decrease the Drive parameter the sound will change in a different way than you would expect from an SD9.. so at...
  76. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50

    A little jam with my 62 Tele thru the Axe powered with the Matrix GM50. Cab is 1x12" open back with an Eminence Tonespotter, miked with an SM57. Double Verb (Twin) model set to light breakup and Maxon SD9 cloned using the Tube Drive model. here with the Strat
  77. Enzo Sutera

    Enzo Sutera - AxeFxII & Matrix GM50 - Maxon SD9 cloned!

    A little jam with my 62 Tele thru the Axe powered with the Matrix GM50. Cab is 1x12" open back with an Eminence Tonespotter, miked with an SM57. Double Verb (Twin) model set to light breakup and Maxon SD9 cloned using the Tube Drive model. Settings for the Drive Block: - Type: Tube Drive -...
  78. Enzo Sutera

    Tube amp VS Matrix GM50 (unbiased)

    +10000 Forget tubes and go Matrix.. you´ll not regret it. The FEEL is definitely there, at any sound pressure level and without the tube hassle.
  79. Enzo Sutera

    Firmware 6.01

    Maxon SD-9 I´ve got close tweaking the Tube Drive but still.. it would be great to have the original modelled. Let´s keep dreaming ;)
  80. Enzo Sutera

    Great speaker for II + Matrix GM50 + 1x12 (any options BESIDES the EV12L)?

    Take the 8 ohms version! You will get 3dB more headroom from the GM50!!
  81. Enzo Sutera

    Great speaker for II + Matrix GM50 + 1x12 (any options BESIDES the EV12L)?

    The Jensen Tornado is a great speaker. You can get very nice clean sounds. Anyway I was not impressed by the Marshall sims with it.. it sounded somewhat too clinic to my ears. The Tonkerlite is a good compromise for clean and dist sounds imho.
  82. Enzo Sutera

    Great speaker for II + Matrix GM50 + 1x12 (any options BESIDES the EV12L)?

    Believe me.. the Tonkerlite sounds nothing like the V30. The V30 is way more bright and scooped on the mids, like almost any Celestion (the CL80 too). If we are speaking neutral speakers simply forget Celestions. I attached 2 IRs of my 1x12" cab so that you can compare the Tonkerlite and the...
  83. Enzo Sutera

    Great speaker for II + Matrix GM50 + 1x12 (any options BESIDES the EV12L)?

    If you are looking for a powerful speaker that will stay pretty neutral I can suggest you the Eminence Tonkerlite. It´s 125 Watts with 101dB sensitivity and being Neodym it weights almost nothing! It has way more character than the EV (not a bag thing at all) and it sounds good at low pressure...
  84. Enzo Sutera

    Less headroom on clean fenders?

    Well.. a Silverface 73 Twin isnt likely modelled in the Axe (what a luck), the Axe is supposed to model a Blackface AB763 circuit (what a luck). Both amps are reacting in a very different way, the 73 has way more "headroom", a Master Volume added, is biased differently, has different trafos...
  85. Enzo Sutera

    Matrix GM50 Review

    Your speakers are likely 8 Ohm each wired in series resulting in a 16 ohm load. You can easily wire them in parallel and achieve 4 Ohm.
  86. Enzo Sutera

    Matrix GM50 Review

    250w into 4 ohms sounds good to me. It would then be around 120w into 8 ohms which is still more than enough for stage use, exactly what I´m hearing with the GM50 into my 16 ohms cab right now (freaking loud). Anyway I wouldnt go for less, it´s always better to have some headroom left..
  87. Enzo Sutera

    GM50 v. GT800FX

    I compared both. Take a look here: http://forum.fractalaudio.com/amps-cabs/51253-matrix-gm50-review.html
  88. Enzo Sutera

    Matrix GM50 Review

    Yesterday I´ve received a GM50 from Matrix for evaluation. I´ve had the chance to play with it a little and I have to say: they definitely nailed it! It was clear from the first chord. I´ve done extensive tests comparing it to the GT800 and to my real tube amps. Using the Axe and my favorite...
  89. Enzo Sutera

    Firmware 6.0 Matched Amp Controls - Hash Mark for Knobs not on Original

    +1
  90. Enzo Sutera

    Matrix GM50

    and it´s ok so.. who needs stereo these days? yes, you can always buy two of them.. they are going to be cheap but I would say buy a GT800 then
  91. Enzo Sutera

    Matrix GM50

    yeah! that´s it. simply amazing!
  92. Enzo Sutera

    Matrix GM50

    I can only suggest to offer a portable version without mounting screws holes. Think people like me that are willing to use it with different cabs depending on the venue, or people that simply dont want to screw it in. Otherwise it sounds promising!
  93. Enzo Sutera

    Matrix GM50

    Cool, thanks! A pic of the rear side maybe? How does it compare to one channel of the GT800 volume wise?
  94. Enzo Sutera

    Matrix GM50

    It´s exactly what I was looking for. Looking forward to read the specs!
  95. Enzo Sutera

    Best power amp for Axe-Fx II?

    no need to be sarcastic.. since Matrix managed to pack 800 Watt in 1U rack space, I´d not be surprised to see a 200 Watt solution packed in a small enclosure you can store in your gigbag pocket. Being a working musician that uses to fly a lot, something like this would save me many headaches...
  96. Enzo Sutera

    Best power amp for Axe-Fx II?

    It doesnt get any better than the Matrix one imho.. I´m looking forward to see the annunced new amp released. If it´s going to be a little brother of the GT800FX with less power and more portable, I´m sold.
  97. Enzo Sutera

    Ernie Ball Expression Pedals Help

    yes
  98. Enzo Sutera

    Ernie Ball Expression Pedals Help

    here you go: Analog Alchemy - EMH check the "linear pot" page. it works, no need to change the pot
  99. Enzo Sutera

    Wow...CAE3+...I love you....

    I´m the one who provided the CAE schematics to Cliff back in the days.. I assure my schematics were 100% correct as I draw them by myself. I compared the model to the real thing many times and I can also say it´s very close. Bear in mind that as Cliff stated once the schematics dont tell the...
  100. Enzo Sutera

    Axe-Fx II Firmware Version 3.00 Up

    Yes I´ve experienced it too, it looks like a bug.. anyway it´s a great update!
Back
Top Bottom