Search results for query: *

  1. Axeman

    The Edge/U2 and UAFX pedals

    Agree and all your assumptions are right on target. Many (not all) of Edge's strat songs are played in quack position (Streets, AIWIY, Pride, ISHFWILF, etc). Strat quack into AC-30 set to "edge of breakup" is the core tone. Don't forget the Edge uses a Herdim pick and turns it sideways. He...
  2. Axeman

    The Edge/U2 and UAFX pedals

    Sure, I'll post it next time I turn on the gear (over the holiday). I tried the SDD-3000 before the amp and to me it's just a boost. Maybe my ears can't tell, but it doesn't seem to doo much. It's not the key to my tone with the Axe. I've learned to simplify. I tried to make all my core...
  3. Axeman

    The Edge/U2 and UAFX pedals

    I know, but I just can't get the Axe model to work the way I want to without turning it on and up. I've tried others' presets over the years and they are almost always too "thiin and/or brittle." So I started from scratch one day and spent hours experimenting with all the knobs to understand...
  4. Axeman

    The Edge/U2 and UAFX pedals

    And here is a Streets clip without the backtrack and a few other snippets with and without delay so you can hear the underlying AC-30 tone. AC-30 Model Tones w/ & wo Delay
  5. Axeman

    The Edge/U2 and UAFX pedals

    I made some minor tweeks to my preset based on FW 21.04. I used the Paris clip above as my reference point. There is no tone matching here. As I mentioned above, there is no reason to ever use another amp. BTW the trick for U2 tone IMHO with the Axe is the negative feedback knob. For the...
  6. Axeman

    Takahiro Moriuchi Rocks

    Taka is the lead singer of One Ok Rock (Japan). This is fantastic! Note the jazz touch at the end.
  7. Axeman

    The Edge/U2 and UAFX pedals

    I'll update my Streets preset over next few days or latest firmware release (it's been a while since I played the song) and then I'll post a clip. I like the tone in the Slane version but over last few years I've been using the Paris clip as a reference. I can get very close to that version...
  8. Axeman

    The Edge/U2 and UAFX pedals

    So kind of you thank you! Yes, I found Mick and others on the same group. They are my mentors. The only time I've been ahead of Edge was with regards to Fractal. I can say I started using it before he did and said he should simplify his rig. ;-)
  9. Axeman

    Bryan Adams and Keith Scott!

    One of my fav artists of all time. I missed him many times on tour. But this past week I was early on Ticketmaster presale and just scored two front row center tickets in Raleigh for next March. Can't wait!
  10. Axeman

    The Edge/U2 and UAFX pedals

    The Axe-Fx has an amazing Vox model for U2. The best part is you can adjust so many parameters to dial in any adjustments you need. About 12 years ago I wasn't happy with the Axe model in the old unit and used the Liverpool pedal which is fantastic (warm and you can dial in great AC-30 tone)...
  11. Axeman

    I think we will see a major product release very shortly from fractal!

    Announcing the Axe-Fx La Fine (pronounced "fee-nay", meaning the end) Ultra Mega Platinum Diamond. Best and Final. Adios. So long, and thanks for all the fish. Offers new simple, five step process that saves all musicians a massive number of preset building / tweaking hours... 1. Connect...
  12. Axeman

    Barracuda flanger

    I came across this old thread. This is one of my favorite rock guitar tones of all time. I’ve studied the song and tracks and not only is it a flanger but the key to the tone is how the two tracks complement each other. The song can be played with one guitar but it’s not like the epic studio...
  13. Axeman

    Heart - Barracuda amp tone

    I was able to connect with Roger Fisher, one of the original guitarists in Heart (with Howard Leese), and I asked him what he used. This is a direct quote from him: "Strat and Marshall. It's in the hands, heart, and soul. The gear doesn't really matter." There are two guitar tracks. At least...
  14. Axeman

    Coming soon...

    And we are done! I posted it in the Recordings thread... https://forum.fractalaudio.com/threads/cover-of-stevie-nicks-edge-of-seventeen.194134/
  15. Axeman

    AFIII Stevie Nicks' "Edge of Seventeen" Cover (Live Guitar Tone)

    So here it is! I was able to capture the elusive live tone of Waddy Wachtel's work on "Edge of Seventeen" by Stevie Nicks. This is Axe-Fx III with no tone match. No delay either. It's all up and down 16th notes. Waddy doesn't use effects, although the studio version definitely has some post...
  16. Axeman

    Coming soon...

    Yes my bad here. Before I finish the tutorial I have to watch my own cover and learn it again. I’ll get to work on it after I finish this cover. I needed to do something that I though was easy. I’ve recorded several versions of the cover. I keep screwing up. Now I know how Tom Petty felt...
  17. Axeman

    Coming soon...

    I promise my cover will be a little better than this. ;-)
  18. Axeman

    Coming soon...

    Nope but two of those on my list to build ultimate preset.
  19. Axeman

    Coming soon...

    I know it must be good at this point. I promise, I’m working on it. It’s going to be my comeback on my channel even if not U2. Lots of new production equipment. It will be worth the wait.
  20. Axeman

    Coming soon...

    Nope but this is on my list. I have all the original guitar tracks and Rockman effects. I’ll model them on the Axe. That will be a lot of work but I will do it someday. Same with Limelight. Two of my favs. I’ve started recording the cover of the to be mentioned song. It’s harder to play...
  21. Axeman

    Coming soon...

    Ah!! This was originally posted under Recordings but Fractal moved the thread!!
  22. Axeman

    Coming soon...

    So I dropped the ball here and got distracted with life, which included a move out of the big city to North Carolina. I’m glad I never posted what was planned because I’m hindsight I wasn’t happy with it. Well, I’m back and I promise a big cover is coming soon. As of this week I nailed the...
  23. Axeman

    WTB Beware of This Seller (audiomaster)

    Yep, all good. My mistake... I'm usually careful but got lazy this time. I'm a big believer in "caveat emptor." Live and learn. Won't happen again!
  24. Axeman

    Axe-FX III with Real cab vs. the Real thing

    I absolutely believe this. The Axe III is amazing. So time to end firmware updates? ;-)
  25. Axeman

    WTB Beware of This Seller (audiomaster)

    Agree. Let’s see what happens. Just noticed that I’m no longer able to send seller messages over PayPal. They never responded any any emails or PP messages. He’s a fraud.
  26. Axeman

    WTB Beware of This Seller (audiomaster)

    Thank you for offering! Very kind of you. Someone else contacted me and I found the cab I was looking for. I still have faith in people. I take responsibility for my mistake. It could have been avoided. Here is what's interesting... I was in a rush and didn't read the final negotiating...
  27. Axeman

    WTB Beware of This Seller (audiomaster)

    I'm writing to warn everyone of this person on the forum: https://forum.fractalaudio.com/members/audiomaster.85058/ Do not engage with them about purchasing any item. He asked for F&F on PayPal and then didn't follow through. It's been two weeks of silence (tried reaching him through PayPal...
  28. Axeman

    FracTool - for power users only

    I was able to get part of the way there. I loaded Axe-Fx III firmware 2.0 and then my XLII+ cab back up file to the Axe III. Fractool connected to my Axe III and then converted and loaded my XLII+ presets (saved back in Aug 21 from Quantum v10.01). Some presets had an "Out2" block put in the...
  29. Axeman

    FracTool - for power users only

    I have both and Axe-Fx II XL+ and Axe-3 Mark II. I've loaded Quantum v10.01 (latest on Fractal site) on the XL and latest firmware on the III. I then loaded my old Axe II presets into the XL+. They all work perfectly. When I export them and use Fractool to load into the Axe III, they don't...
  30. Axeman

    FracTool - for power users only

    I tired the latest version of Fractools to convert old IIXL files to III and when I load the converted files into the Axe I get no sound. I've spent an hour on one preset trying to track down the problem and can't figure it out. There are levles on each block on the Axe, and very minimal...
  31. Axeman

    Saving Unlinked Presets?

    Yes, work/life got in the way. Slowly coming back to guitar.
  32. Axeman

    Saving Unlinked Presets?

    Thank Yek. Wow, your still here contributing. I remember you in the early days. Thanks for all you do for this community!
  33. Axeman

    Saving Unlinked Presets?

    I recall years ago that Axe-Edit had a preference setting so that when saving presets, they would save unlinked from global settings. I can't find it under preferences. I would like to backup all my presets as is (with global blocks linked) and all unlinked. I see I can unlink all the global...
  34. Axeman

    Yellow Dotted Box?

    Thank you! But why would it change when I switch tabs. Sometimes one cab is outlined, and when I click on that same tab later without making any changes, all four are highlighted in yellow. Completely random.
  35. Axeman

    Yellow Dotted Box?

    Hi! Anyone know what the yellow dotted box is around some of the cab names in the cab block? They keep changing without me making any changes. This screen shot has the left most cab highlighted with yellow dotted box (the only one highlighted). When I click the "Cab More..." tab, and then...
  36. Axeman

    FS Matrix Gt1000 2u + NL212

    I understand this is an old post. Did you sell your NL212?
  37. Axeman

    WTB Matrix NL212 Speaker Cabinet

    I'm looking to purchase a Matrix Neolight 212 speaker cab if anyone has one and is looking to sell. Thank you!
  38. Axeman

    AFIII Heartbreaker Full Band Cover

    Great vocal also!
  39. Axeman

    AFIII Barracuda full band cover

    Guitar tone is fantastic! That sounds so close to the original track. Is preset available or can you provide summary of the set up?
  40. Axeman

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    Thanks. It would be great if there was a way to quantify "better." What sounds better one day may not be the next The only true test is a blinded comparison under controlled conditions. There is also confirmation bias. That fact that Fractal announces an update with "improvements" means...
  41. Axeman

    MATRIX is still in business.

    So glad you're still in business. I have your GT1000FX and it's fantastic.
  42. Axeman

    AFIII AC/DC - "Back In Black" Tone Match

    How does the tracking work? Same recording used in different pans or different separate recordings? Thx!
  43. Axeman

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    Question.... The Axe-Fx has improved leaps and bounds over the years. I definitely hear a major difference between the first version of the Axe and software and the latest. But the differences are not as noticeable anymore. I'm curious if there is some practical limit on how many updates it...
  44. Axeman

    Def Leppard Tone

    Agree with you completely. Studio tones by great producers are tough to recreate, but the Rockman does get you most of the way there. I have an x100 and the pre-amp distortion professional version. Someday I'll invest the time to model it super accurately in the Axe without matching.
  45. Axeman

    Def Leppard Tone

    Check out "Distortion #2" on the x100. Nails it.
  46. Axeman

    Def Leppard Tone

    Hysteria has Rockman all over it (studio recordings that is). Colen mentioned it in an interview. So aim for modeling the Rockman tone. Here you go... "98% was a Rockman."
  47. Axeman

    Axe-Edit Layout Inconsistency

    Yes, the Axe and Axe-Edit have a Presence Frequency knob and that is working. It's in Advanced on the unit and on the Power Amp tab in Axe-Edit. If the AC-30 doesn't have a "Presence" knob, then maybe it should be removed in the Axe unit model in the advanced section under Tone and Gain.
  48. Axeman

    Axe-Edit Layout Inconsistency

    The High Cut knob on the Axe on the Tone tab moves the High Cut knobs on Tone and Ideal tabs on Axe-Edit. The Presence knob on the Advanced tab on the Axe unit does not move any knob in Axe-Edit. I moved it while watching every tab in Axe-Edit. Nothing moves. Either the Axe AC-30 model...
  49. Axeman

    Axe-Edit Layout Inconsistency

    Thx, no I just tried that again. The Hi-Cut on the Tone tab on the Axe unit moves the Hi-Cut tone knob on both the Tone and Ideal tabs in Axe-Edit. The Presence knob under the Advanced tab on the Axe doesn't move anything in Axe-Edit. I moved this knob while looking at every tab in Axe-Edit...
  50. Axeman

    Axe-Edit Layout Inconsistency

    I'm in AC-30 model. In the Advanced tab there is a Presence control under Tone and Gain. It goes from 0 and 10 and it works. But no knobs in Axe-Edit turn with it. Either it shouldn't be in the AC-30 model or it should be added to Axe-Edit.
  51. Axeman

    Axe-Edit Layout Inconsistency

    Yes, it did one automatically and when it doesn't, I always refresh. I appreciate you asking. I'm not trying to be a pain. I've had an Axe since the very first unit released. I do try to fix things myself before posting. I'm far from perfect for sure. I really do think I found a bug...
  52. Axeman

    Axe-Edit Layout Inconsistency

    I just went through each tab in Axe-Edit and when I turn the "Presence" knob in Advanced (under Tone and Gain), and no knobs change on any other Axe-Edit Tabs.
  53. Axeman

    Axe-Edit Layout Inconsistency

    I posted them in a separate reply (20.04 and 1.12.07). Thank you for above. Not sure how I missed the Output Mode (my bad - late night brain issue I guess). But I don't have "presence" in your first screen shot. I have "High Cut." Maybe this changes with another setting? I just tested...
  54. Axeman

    Axe-Edit Layout Inconsistency

    Apologies for not posting the versions, but don't assume I wasn't running the latest either. I'm running v20.04 on the firmware and 1.12.07 on Axe-Edit which are the latest on the support page.
  55. Axeman

    Axe-Edit Layout Inconsistency

    Thanks for the tips. I always run the recent version of both. I updated the most recent version on both at the same time. Can someone confirm for me that these two parameters are not available in Axe-Edit: 1 - Under the Advanced tab on the Axe under Tone & Gain there is a setting called...
  56. Axeman

    Axe-Edit Layout Inconsistency

    Found another mismatch... Under the Advanced tab on the Axe under Tone & Gain there is a setting called "Presence." I can't find this in Axe-Edit. This is different than "Presence Frequency" which is under Power Amp in Axe-Edit and under Advanced (Power Amp) in the Axe unit. Under the Axe...
  57. Axeman

    Axe-Edit Layout Inconsistency

    I'm catching up on the latest firmware for Axe-Edit and the Axe. Apologies if this has been explained, but I can't find an answer. Why do the tabs in Axe-Edit not match the tabs on the Axe? I like to use both and I would prefer consistency. Just one example of the confusion: On the Axe...
  58. Axeman

    AFIII U2 - "Mysterious Ways" Preset Tutorial

    That's one of the best I've heard on the Axe. Well done!
  59. Axeman

    AFIII Van Halen - "Runnin' With The Devil" Intro (Van Halen preset in the making)

    Killer!
  60. Axeman

    AFIII Brian May Style on Axe-Fx

    Wow best Brian May tone I've ever heard on Axe. Amazing.
  61. Axeman

    AFIII Axe-Fx 3 Streaming?

    I'm able to get my Axe3 to work with OMS but only the right side is coming through. When I play there is a red marker at the bottom of the left channel gain light (all the way to the left of the light) on OMS. Both bars are moving but in headphone on YouTube streaming I only hear right side...
  62. Axeman

    AFIII "No One Like You" Intro Solo

    Fantastic tone and playing!
  63. Axeman

    AFIII "Red Barchetta" - Rush - Guitar and Bass with Axe-Fx III

    Sensational!
  64. Axeman

    *FREE* Far-Field Session #2 Cab Pack

    Thank you!
  65. Axeman

    Def Leppard Makes the Switch to the Axe-Fx III

    Do they use standard IRs all available to us or do they create their own from the cabs they've used in the past?
  66. Axeman

    Golden ratio delays

    Great stuff. It does start to converge into reverb or shimmer as you add certain other changes like the diffusion or multiple delays. In fact this is likely a great setting to use when sitting up the multiple delays for shimmer because it's so natural. I'm going to update my shimmer settings...
  67. Axeman

    Cab Pan Followed by Delay Question

    2290 with mod. Everything set to center so not using an stereo panning on the delay black. To test it again, I used a mono delay block instead. Before it is a cab with an IR panned full -100. The first dry note pans full left and then all the delayed notes are in the center.
  68. Axeman

    Cab Pan Followed by Delay Question

    I have a cab IR that is panned left. It sounds fine with the delay (after the cab) off. But when I turn the delay on, only the first dry note is panned left and then all delayed notes are center. Is this what is supposed to happen? Why is IR panning only related to the dry signal? Shouldn't...
  69. Axeman

    Axe-Fx III Firmware Version 5.00 Beta #3

    The SPDIF Input Level control is huge, thank you!!!!
  70. Axeman

    Axe-Fx III Firmware 5 Beta - Mesa Dual Rectifier Tutorial

    Dual "rectum fryer"!!! Awesome.
  71. Axeman

    The infamous "amp in the room" vs FRFR discussion

    Ok, big update here. Thanks to Jason's tips, I made a huge advance in getting the "in-the-room" tone I was looking for. The key is to use a second "room" cab that has modeled the amp much further away. There are fewer of these (with the text "room" in the title of the IR), but I found four I...
  72. Axeman

    Blind Test #1: Axe-Fx III vs. Real Amp

    Jason, I can't tell. Just ignore dumbeat. He's taking this all way too seriously. Most wouldn't be able to tell the difference even if they were there with you. I know because I've done this before with older firmware and even though I knew the answer because I was there, I'm pretty sure I...
  73. Axeman

    Axe-Fx III Firmware Version 5.00 Beta #2

    Thank you for replying. BTW, you may recall I have been a customer since the very first unit. While I may not be able to tell the difference all the time between firmware updates, there is a noticeable difference over time. I recall that I could never get the original AC30 model in the first...
  74. Axeman

    Axe-Fx III Firmware Version 5.00 Beta #2

    Wow, on 5.0 now! Thank you Cliff for continually striving for great tone. I have a question based on all the great updates. Do you think there will ever be a time when you're 99% happy that there is not a need for any more updates? What % of the way do you think you are from finally saying...
  75. Axeman

    AFIII Rush - “Limelight”

    Yeah that sounds incredible! Which backtrack did you use?
  76. Axeman

    The infamous "amp in the room" vs FRFR discussion

    BTW, what type of media links did you use above? What is suddenlink? Cool embedded format where you can download the clip right from this page.
  77. Axeman

    The infamous "amp in the room" vs FRFR discussion

    You helped me in a huge way, thank you! I just added a second "room" cab similar to the one you used, and also added another reverb (so one long and one short time reverb) and it already sounds better, even without the TM block. I'm still interested in your thoughts to my questions above, but...
  78. Axeman

    The infamous "amp in the room" vs FRFR discussion

    No worries, thx. Can you describe the set up in more detail? I didn't understand the PEQ in parallel. Here is how I interpreted your set up: 1 - You played the clip into a mixer block to convert the signal to mono (which I obviously don't need if I'm going to update my original preset) 2 -...
  79. Axeman

    The infamous "amp in the room" vs FRFR discussion

    Jason, wow, that's impressive. Yes, I agree the first clip is much better, and thx for the kind words. I was just trying to illustrate what I think was missing. I obviously don't have your level of experience with sound mixing and the Axe. I can't thank you enough. You obviously put a lot...
  80. Axeman

    The infamous "amp in the room" vs FRFR discussion

    I'm not a pro, but I respectfully disagree. I've been a lot of hours into this. I recently recorded three clips: 1- Axe with carefully chosen IRs (using amp, cab, reverb and headphones) 2- Axe with power amp and cab (not FRFR) recorded with i-Phone mic a few feet away from cab in a small...
  81. Axeman

    FC Series Controllers Waitlist

    Sent request on 5/18/18 at 9:03am ET Received confirm 5/18/18 at 9:08am ET Received order invite 3/1/19, 12:59 PM Ordered on 3/2/19
  82. Axeman

    Basic setup for Logic Pro X

    As Corinthian explained above, are you sure you have the track inputs set correctly? The Axe is like any other device that you used as an input into Logic. Do other devices work in Logic?
  83. Axeman

    40 Synth presets available to download!

    That second sample is KILLER!!!
  84. Axeman

    Axe-Fx III Firmware Version 3.00

    Cliff is the "Einstein" of digital processing in the music industry. He completely took this industry to an entirely new level and raised the bar. I realize there is a larger team now, but we have to give Cliff credit for his dedication and hands-on approach. Huge shout out to cliff for such...
  85. Axeman

    Help With Spdif

    I think I got it... set SPIDF/AES to SPDIF and SPIDFI/AES Out Source set to Output 1.
  86. Axeman

    Help With Spdif

    Related question so using this thread. Is the signal in the Axe III always sent to the SPIDIF out. I have my computer coming into the USB of my interface and it's working. The spidif out from the Axe is going into the spidif in on the interface but I hear nothing coming from the Axe III. I...
  87. Axeman

    AFIII U2 "Streets" Clip

    Oh, I'm certain you're right. I've heard the same. Many say the delay hitting the amp input impacts the tone. I just don't notice it in the Axe, but I could be wrong.
  88. Axeman

    AFIII U2 "Streets" Clip

    Hi Edo. Long time since we've connected. Hope all is well. I've always placed the delays after the cab to maintain the stereo. I used the new Ambient Stereo delay for the first clip posted above because I liked the stereo feel and separation. But I used the 2290 w/ Mod for the second Matrix...
  89. Axeman

    AFIII U2 "Streets" Clip

    I'm humbled. Thx for the kind feedback! Motivates me to do more/better.
  90. Axeman

    AFIII U2 "Streets" Clip

    Yes, you're right, but I live in an apartment and the volume I prefer isn't going to go over well with my neighbors or my wife! And then there is all the setup, mic adjustments, dog barking, etc etc. So simple with just the Axe III doing everything.
  91. Axeman

    AFIII U2 "Streets" Clip

    LOL, ok smart---. :) Seriously, if I listen to my Matrix set up in my office and then put on my headphones and listen to my preset with cab and reverb, the tone from the Matrix set up is so much better (doing my best to adjust for volume - in other words, I'm turning up the headphones quite a...
  92. Axeman

    AFIII U2 "Streets" Clip

    This is a quick recording of my Axe III Streets preset with cab and reverb model off and then routed to Matrix GT1000FX power amp and Matrix NL212 cab. Keep in mind this was recorded with an iPhone X microphone using an app called "Voice Record." It would sound even better if done with a...
  93. Axeman

    AFIII U2 "Streets" Clip

    Good to know. I think the heavier gauges enhance the chime. Edge uses .11s quite a bit on his Strat. I used .11s on this clip. I think .09s are too small for use with a Herdim pick. The Herdim pick will wear a little over time and not catch as often. I forget if I use the 2290. I think...
  94. Axeman

    AFIII The Big Money

    Nailed it!
  95. Axeman

    Classes The Complete Axe-Fx III Master Class with Cooper Carter - v3.0 AVAILABLE NOW!

    This looks fantastic. I just subscribed to the service. Thank you!
  96. Axeman

    Def Leppard Makes the Switch to the Axe-Fx III

    DL is also one of my favorite hard rock bands. Joe is incredibly dedicated to the band and music. While they sound amazing live, they are one of those bands that has a hard time replicating the studio tracks because they had so many layers in the mix. Robert John Mutt Lange is meticulous in...
  97. Axeman

    Axe-Fx III Firmware Version 2.03

    Thank you for USB input controls!
  98. Axeman

    Coming soon...

    Oh, no worries at all. My sad smiley face was meant to imply it's all in fun, but maybe that didn't come across. Didn't take it too seriously at all. I'm amazed so many are interested. I'm tweaking again now. Aiming for next weekend for the big release. Have to get my recording setup back...
  99. Axeman

    Coming soon...

    I apologize already for disappointing you. :-( Definitely don't hold your breath.
  100. Axeman

    Coming soon...

    Nope. Although it turned out as I was working on the preset I noticed it came very close to nailing Stone in Love. Journey and Def Leopard songs are definitely on my long term to do list.
Back
Top Bottom