Search results for query: *

  1. S

    Guitar "mojo"?

    Well, isn't it great things like this happen?
  2. S

    fcb1010 preset number issue

    That's why I suggested so. I had the same thing happen once or twice and I was pretty sure about how my fcb was programmed (on pc with the ripwerx editor). So the CC#0 value reached my Axe-FX SOMEHOW, who knows. What I did later was to program the CC#0 to be sent with the FCB patches 98-100...
  3. S

    fcb1010 preset number issue

    before that you could just try to turn both units off and repower them. If the behaviour stays and you haven't done a big programming on the fcb you can do a factory reset.
  4. S

    Good Wireless unit

    Since noone brought it up yet, I (Europe) love my stageclix jack. For me the real plug and play solution. No pots, nothing to adjust, just plug in, power up and play. Don't know if it's available worldwide, but I'd guess sinse it's 2.4 GHz digital it should work anywhere.
  5. S

    48 hrs with the axe, and I am loosing my patience

    Hmm, maybe I'm just way tooooo easy to satisfy. But when I hooked up my standard the first time (to mixer, listening to with in-ears pluged into phones out) I didn't get past Patch No. 1 Studio Lead (display offset on) for quite a while. Just because I could do almost anything just with this...
  6. S

    Axe standard set up

    Definitely use a mixer. You might want to hear any other source to play with sooner or later so some extra ins solve the problem. Plus you can give them the right eq-setting if sound is not satifying from the start.
  7. S

    Stand for Axe FX rack?

    I'd go for the second, I'm using this one too and I like it.
  8. S

    reset frustration!!!!!!!!

    As to parameter factory reset - from the manual, p. 98 - "To reset all the factory parameter in your Axe-Fx select this page and press ENTER. This will reset the Global parameters, the MIDI configuration, Continuous Controller setup and Pedal configuration. This will not clear or otherwise...
  9. S

    Need a way to determine modifier settings

    Thanks for the answer! Sorry, I wasn't online for a couple of days. So I guess my calculating way was correct I just have to change 24 to 40 (I calculated with a range of -12 to +12 instead of -20 to +20) wich leads me to the same result with (20+3.5)/40 = 58,75%. I just wasn't sure if...
  10. S

    Modifier Einstellung

    Hab mittlerweile auch nen Tip im Axe Diskussions-Forum erhalten. Bei Nutzung des Editors sieht man die Änderung des Parameters nämlich, so dass 0dB = 50% und +3,5dB = 58,7%. Schade, dass es für die Anzeige der Parameter des Zielwertes im Modifier wohl kein Firmware Update mehr geben wird.
  11. S

    Need a way to determine modifier settings

    Thanks a lot! So I guess there is no way to calculate these when editing on the Axe? Then I'll have to go use the editor for those parameter changes that do not show on the Axe screen. Thanks again. Wolfgang
  12. S

    Need a way to determine modifier settings

    I'm trying to control the level-parameter of a filter block (Null-Filter) with one expression pedal of my behringer FCB1010 between 0dB (min.) and +3.5dB (max.). What values do I have to set "start", "mid" and "max" of the modifier (since they are %-values and not the dB values of the selected...
  13. S

    Modifier Einstellung

    Nanu, sind die ganzen Programmier-Cracks alle in Urlaub? Keiner nen Hinweis außer "nach Gefühl ausprobieren"? Bei anderen Parametern, die ich mittels Pedal ändern kann, zeigt mir das Axe die Veränderung an, so dass ich die %-Werte für Start, Mitte und Maximum, danach einstellen kann, beim...
  14. S

    Modifier Einstellung

    Hallo Leute, ich bräuchte nen Tip zur Einstellung von Modifier-Werten, die ich über ein Midi-Expression-Pedal an mein Axe Std. sende. Ich habe (in einem Axe Std. Patch) einen Null-Filter (könnte auch ein Vol-Block sein, bei mir ist es jetzt gerade ein Filter-Block) und will mit dem...
  15. S

    Using both inputs..I've looked...I find almost the same question but not quite

    Okay, I skipped some posts now . . . . but in your Layout if you only want to use the rear-input 2 you shouldn't have a connection from the very left side of your Layout screen to your FX-Loop input. Doing this the front input signal will not be forwarded to further processing. That's how I...
  16. S

    FCB1010 uno and tap tempo issue - help appreciated

    My suggestion - and the way I do it - I use an extra footswitch set to global tab tempo control. Okay it's another cable and another somethin on the floor, but the easiest way for me.
  17. S

    Own hammer price increase !? WTH !!??

    I never worked with IRs and to be honest I obviously didn't understand most of the posts if it is about a 10$ library with somewhat 1,980 IRs in it (and a whole lot of different file formats) or if it is about one cab sim for 10$ ? ? ? Could someone clear this up for me please? Thanks.
  18. S

    Dream Theater tonight in Orlando...

    I'll have to wait until february 2012 to see them in Germany. It'll be my 2nd time and last (and my first) time was this year in August at Loreley Night of the Prog Festival and it was really cool. Can't wait till febrrrrrrrrrr
  19. S

    Intelligent Harmony

    Since noone else answered, I got this out of the manual (I only have a Std): Custom Shifter (Ultra Only); The Custom Shifter is identical to the Intelligent Harmony except that it uses the custom shift tables stored in the global memory. Parameters; All parameters are the same as the...
  20. S

    Saw Dream Theater last night

    I saw them at the Night of the Prog Festival at the Loreley here in Germany on July 9 and loved it. As to amps: I remember on a DVD backstage tour MP explaining there was only one "real" amp miked under a blanket behind the fake cabs.
  21. S

    Copying a Block to place in another patch

    Oops, I would've answered "effect retrieve"
  22. S

    Need Advice Regarding Boss FS-5U Footswitch & MFC Pedals

    I'm using one of the two switches on my FS-6 as tap, but plugged into the Axe-FX. Just not shure what settings I use. I'll have to look it up when I'm home. Think I have it set to "latching" in the Axe-FX I-O Menu for the tap tempo assignment and on the FS-6. Sorry, but having no idea if it's...
  23. S

    Pitch/Intel Harmony Bug

    You didn't mention if you have a midi-device attached to your Axe. My first suggestion from your description would be, that some floorboard sends a midi-signal on recall of patch #2. So if only your voice2 Harmony becomes inaudible, check if you happen to have a controller/modifier attached to...
  24. S

    [A complete noob question] - Is there a place where users share their presets?

    Oops, you were too quick, I wanted to be a bit more detailed: Forum -> Axe Fx -> Share and Request Patches
  25. S

    [A complete noob question] - Is there a place where users share their presets?

    jep, you should look in the "Share and Request Patches" Forum.
  26. S

    Why do Europeans have to pay $3,300

    Hmm, didn't know that. So within the US if you're buying from another state there is no sales tax at all only if you're in the same state???
  27. S

    Why do Europeans have to pay $3,300

    Because shipping is around $100, customs I'm not sure about, that could be 4,5% (TARIC-Code 8518 40 80 91 which could be wrong, but I didn't find anything better), Tax is 19% which adds up to 23,5% onto $2.200 /1,4273 = 1.541 EUR x 1,235 = 1.903 EUR. And that's calculated from the sales price...
  28. S

    I don't understand why there are almost no stereo amp heads.

    I used to play a Hughes & Kettner AX 64 Stereo Combo with two 12" and also an Ampeg stereo Combo with two 12" (this also is the one that I would use to amplify my Axe if needed). Both of them weren't tube amps. Don't know about heads or tube amps but some Combo were there in stereo. Not may though.
  29. S

    G66 has opened its waiting list

    Can't say for sure now, but I think I waited over a year for my Standard.
  30. S

    Updating Firmware from ***6.x*** to 11, if you can believe that

    Backups and firmware updates I always did and do with Midi-Ox (Bomes war a little slow on my PC, for whatever reason). I usw Axe-Edit for reoragnizing my patches only.
  31. S

    brauche dringend Hilfe beim erstellen eines AMP/DI presets

    Das wäre meine Frage gewesen: warum zwei Reihen mit identischen Amp/Drive oder anderen Blocks einmal mit und einmal ohne Cab anstatt einfach vor dem Cab das signal quasi in zwei Reihen zu splitten und die Reihe mit Cab an Out1 und die DI-Reihe an Out2 zu schicken?
  32. S

    How many presets do you really use live?

    I think it can depend on what kind of music and band setup you're playing in. If a cover band is set up to sound original - or at least different from song to song - you'll probably need a number of presets. Plus, using IA's can change the number of presets you need dramatically. I don't have...
  33. S

    Am I nuts for being happy with my Standard?

    Sorry, don't have the number of Mrs Fox (probably wouldn't give it to you, if I had :-)), but as for my Standard; I'm still over all satisfied, don't even have the newest FW on it. Think I'm still on 10.3 because I didn't want to bother with the new Midi ID, before it was a step forward in...
  34. S

    Blastoff!

    Some questions of the last 11 pages haven't been answered yet, so I'll bring them up again: - Can Standard and Ultra presets be loaded into AxeFX II? - Was FW 11 the last for the old models? (doesn't feel old to me, since I never really waited for a new FW) - Will there be a new Axe Edit...
  35. S

    Where is the sticky Thread for the FCB 1010?

    I thought there used to be a sticky thread for FCB with almost everything in there you need to know. Now I want to calibrate the pedals and that thread is gone. Or just not sticky anymore? Anyone knows without having to search? Any help appreciated. Thanks.
  36. S

    My Axe-fx ULTRA doesn't sound

    My first impression is: turn up the output knop on the front!
  37. S

    Multiple identical patches in the same bank?

    It's 384 memory slots in Ultra and Standard (just the Ultra already has 384 presets and Standard only has 256). To be sure, the patch is just copied I'd try it on the Axe itself. Choose the preset -> store -> change location/name -> Enter Identical patches should then also sound the same.
  38. S

    international users - how long did it take to get your axe-fx once you ordered it?

    Just imagine you'd have to order a Standard (1.500 USD right now, if I found that right) at your dealer for Europe and pay almost 2.400 USD. What do you complain about? And it took a little over a year - back in whatever year it was when the Axe had firmware 5.19
  39. S

    anybody uses the Boss FS-5U for tap tempo?

    No, using the FS6 but with one switch set to latching and the other to momentary. Using it for tap tempo and works fine. What's the question? When assigning a controller to tap tempo (I did it in global) be sure to select the right mode for the controller (latching oder momentary).
  40. S

    Older Firmware Question

    Sorry - wasn't around for some days. I found out I don't have 8.04 but I sent you 8.02 and 8.05!
  41. S

    Sharing an Ultra patch with a Standard user

    I'm not sure Standard and Ultra patche are compatible. Sice the Ultra has additional effcts and parameters, the MIDI-Information in the .syx-file might have a different structure. Sure someone else knows more about this.
  42. S

    Older Firmware Question

    1. Always backup your presets before firmware change 2. Don't forget to use the function to change your presets to the new firmware after upgrading. If you don't like it, downgrade your firmware again and load your old presets back into the Axe 3. Since the download folder is not open to...
  43. S

    How do you tap your tempo?

    It's not really a matter of how you tap but what you're telling the Axe it should do with the tap signal. If you set your Delay to quarter notes and you tap eith . . . well, it's twice as fast. If you're not a "constant tapper" (I mean, using the same tapping rhythm all the time) you'll have...
  44. S

    Is there a way of 'Locking' effects

    Maybe I misunderstood the question but if you want to be sure not to accidently bypass an effect I just would not assign a global controller to that effect. Of course that also means that you have to assign a specific controller in every patch where you do want to be able to turn one specific...
  45. S

    FCB1010 + UNO + ripwerx...how to access different banks!?!?

    Re: FCB1010 + UNO + ripwerx...how to access different banks! Great! Now I know, what is sent first and after. I might install the UnO Chip I bought to use this. For me so far the FCB has just worked fine in Standard Config. Well, why not go for a change? Thanks for the hint.
  46. S

    FCB1010 + UNO + ripwerx...how to access different banks!?!?

    Re: FCB1010 + UNO + ripwerx...how to access different banks! Okay, what I did and what I'd do in your place is to store the five patches you need on Preset no. 1 to 5 and have the FCB send PC 1 to 5. Looks like the easiest solution to me. The way you want the FCB to behave is to send the CC #5...
  47. S

    No effects working...

    You didn't happen to push the bypass-button???
  48. S

    Midi question... way too advanced for me (FCB + Axe)

    This is of the Behringer HP: "Senden von 5 MIDI-Programmwechsel- und 2 Controller-Befehlen pro Preset gleichzeitig" So the FCB can send up to 5 Program Changes and 2 Controller Changes per Preset.
  49. S

    compact midi controllers

    For the ease of setting up the equipement wouldn't it be easier to 'throw' the fcb on the ground and attach the cable than having a smaller controller, have to connect an additional expression pedal and organize the cables on stage? For the ease of putting up my stuff, I love my fcb (10 patches...
  50. S

    MFC 101 - der erste ...

    In Anbetracht der Preise für das Axe schätze ich nicht unter 800 EUR! Axe: Liste US 1.800 USD, Sale US 1.500 USD G66 1.700 EUR Ultra: Liste US 2.300 USD Sale US 2.000 USD G66 2.200 EUR MFC101 Liste US 800 USD Sale US 750 USD G66 . . .
  51. S

    xlr vs unballanced

    Funny, everyone writes that. I haven't noticed a higher level when I changed from unbal. to bal. outs. Should I be worried or is it just a barely noticeable difference?
  52. S

    Kosten für Import eines Mission Pedals nach Deutschland

    Jetzt nur aus der Erinnerung, daher kann es für Sonderfälle auch anders sein. Der Versand wird bei privaten Verkäufern nicht in die Einfuhrumsatzsteur/Zoll-Berechnung einbezogen, bei gewerblichen Verkäufern schon. Der für die Ermittlung des korrekten Zoll-Satzes notwendige TARIC-Code kann hier...
  53. S

    Behringer FCB ...unbekanntes Leben

    Nur für den Fall, dass Du die Presets bezüglich der CAB's entweder/oder benutzen möchtest und nicht sowohl/als auch gäbe es da diesen Satz in der Bedienungsanleitung auf S. 94 unter GLOBAL PARAMETERS: "CABINET - Turning the CABINET to BYPASSED bypasses the Cabinet blocks in all presets. Use...
  54. S

    how to access the new presets

    Not quite sure if I'm mistaken here. I think what you're talking about are the newly available amp sims. Like the new firmwares new presets would be available on the fractalaudio hp http://www.fractalaudio.com/support-fractal.html and the presets on that page are dated Nov 2009. So it's no...
  55. S

    FCB1010 Expression pedals

    Hmm, mine works perfectly well with my standard FCB. But it tells you in the firmware info if your firmware is a standard one or a UNO one.
  56. S

    FCB1010 Expression pedals

    Probably check if max and min values of the expression pedals are set to the values you want them to have. I have mine set to a range from 0 to 127. But in some factory preset patches they might be set to 0 and 1.
  57. S

    FCB1010 won't change banks?

    Just some hints because the information on your setup is not complete. You wrote that you only programmed the patches 1 to 5 on your FCB, so the rest of the patches on the FCB is in a state they have been before. Check, if they do send a program change at all. Maybe they don't. When I...
  58. S

    Axe & FCB-1010 I/A Switch Mystery

    Maybe you should check what type of controller you assigned in the AxeFx. Could be you assigned a "momentary" to the one sort of effect and a "latching" to the other. Hope this helps.
  59. S

    old firmware..

    Well, believe it or not, but there are some PCs out there and still working fine that don't meet the system requirements of Axe-Edit. So with my 833MHz PC I guess I'll have to do it without Axe-Edit. And believe me, I like editors (I've got one for my FCB1010, for the GT-Pro and an old one for...
  60. S

    old firmware..

    Old Firmwares can be found in the Documents starting with Version6. 7.x would be here http://www.fractalaudio.com/Documents/Version7_00/ As to the editor I'll have to let someone else take over, since I've never used it.
  61. S

    Axe und Fratomic Ampständer

    Würde ich den nehmen, da hab ich mein Rack drauf (wozu eigentlich ein Verstärker? ;) ) http://www.thomann.de/de/millenium_as2001.htm
  62. S

    Are the System Dumps compatible

    I'll give it a bump, for I'l like to know too!
  63. S

    Boss FS-6 as controler in pedal 1 and pedal 2 and midimate

    I had the same question, since I was hoping to have four controllers at hand ('feet'). Must be somewhere on the old forum. The pedal inputs on the rear are no stereo inputs and only deliver one controller signal to the AXE. So you can only use one FS-6 with the AXE.
  64. S

    FCB1010 expression pedal problem

    First check, if your pedal midi data goes from 0 to 127 on your Behringer. If it does, the problem should be in your controller setup of the Axe. Do you have an offset defined, changed the scale or anything like this? More than that, I don't know right now. Note: I know all the things with...
  65. S

    What is "ignore redundant MIDI program changes" good for?

    Aahh, thank you very much! That was quick. Now I remember again. I just wonder why I couldn't find it anywhere? Maybe that was in the old forum. Thx again.
  66. S

    What is "ignore redundant MIDI program changes" good for?

    I stumbled over that parameter after the last update and the only thing I found in the forum and the Wiki is one sentence in the Firmware history 5.05 "Added Global Option (I/O menu, MIDI tab) to ignore redundant MIDI program changes". Can someone tell me what that is good for? I can't remeber...
  67. S

    Roland FC-300 vs. Behringer FCB1010

    There are no buttons beneath the pedals on the Behringer. But with the auto-engage function of the Axe you don't need any button to turn the effect on, just start moving the expression pedal.
  68. S

    Axe Not Saving...

    You don't happen to be using a Global Amp in that patch? If not, disconnect MIDI-controller and try again. If it still doesn't save, sorry I don't know.
  69. S

    Input level LED question

    To make a short answer a little longer, it depends on which inputs you use. Using only one input jack of INPUT1 (either the one on front or one of the two on the rear) will make one colum of input leds light up. Using both inputs on the rear (stereo guitar, out from another preamp or whatever)...
  70. S

    Momentary dropout when boost using FCB1010

    I'm using an FCB without UnO. I usually have a "filter"-block added to each preset right before the (very final in each preset) "vol"-block. The filter is a Null-filter usually set anywhere between 2 and 5 dB. Whatever I want to use for SOLO or BOOST I have in the chain bypassed. I use a single...
  71. S

    FCB1010 replacement?

    We're using 220V 50 Hz here in Germany.
  72. S

    Will someone save me from this &*)(&% AXE-FX!!

    Bank Change: all it needs is a controller change, I think CC#0 with 0, 1 oder 2 (it's in the Wiki) to select the banks of the Axe. Even my Behringer does that (though I don't need it). Bank location: If using a Midi librarian (I'm using Bome's right now) you can change the bank position by...
  73. S

    updating presets to no avail ... suggestions please

    Not really. Before uploading banks to the Axe rename a patch that is likeley to be overwritten by the upload. After that, the patch should have another name and has been replaced.
  74. S

    updating presets to no avail ... suggestions please

    If you updated successfully you probably also loades the new presets successfullyy too! There is NO indicator when receiving presets or banks in syx files (especially not the Midi in light).
  75. S

    FCB1010 Exp Pedals don´t work

    a) check the FCB manually, if your settings have been transmitted b) check your Axe, if you assigned the same Midi-Controller # to your (e. g.) Extern1 (or whatever controller you use) that you have assigned your Exp Pedal of the FCB to. If a) and b) are positive your Axe's Midi LED should...
  76. S

    CPU load estimate & global cab bypass issue.

    That's what I remembered from reading before. No matter if you bypass it or not, each block is calculated in your patch (bad for all the just-one-patch-with-all-effects-in-it people, who use IA's to turn the single effects on and off). But it's new to me and good to know, that if you turn...
  77. S

    Can't hear signal coming in thru Input 2 Right jack. Why?

    Well, I don't have the Axe here but I assume it's like this: you have two inputs1 and two inputs2 on the rear. One (mostly the left one) is designed to be used as a single mono input (no matter if it's input1 oder 2) and the other one is meant to be the second half of the stereo input signal...
  78. S

    FCB1010 only switches patches up to 69

    Might be as simple as this: the FCB is set up like this from the start. To change that you'd use the editor as it's the easiest way to change settings of your FCB for numerous patches. All you have to do now is to set the "program change" to the desired value (in your case that would be 69 for...
  79. S

    How to call presets in bank B and C using a GCP?

    I know absolutely nothing about the GCP, so someone else has to take that part, but for the bank change via MIDI I saved me this from the Wiki (since I never find anythin in the Wiki when I need it :oops: ) - this applies to whenever you want to recall a presetz in another bank of the Axe from...
  80. S

    better FOH sound?

    Okay, and now after we blamed the poor Behringer once again, why don't we start beeing helpful. Without knowing the setup you usually use and therefore what sims, effects .... are activated or turned off, I'd try and check: - do the patches you want to use have a cab sim turned on and is it a...
  81. S

    7.10 firmware

    "not available in your country" - well I guess I won't find out what this is all about :|
  82. S

    Moving Banks?

    And if you're not using the editor but just your midi librarian (if it's bome's or midi-ox souldn't really matter) all you have to do. Load the bank from your computer into your midi librarian. The sysex-file should start like this: F0 00 00 7D 00 04 02 (which would be sent to Bank A of the...
  83. S

    random tip -- faster naming

    Thanks for that info godprobe! Too bad though, that's what I was afraid would be the problem. So now I have to find out, why the little programm won't show me the MIDI options. :?: I guess it would be easier if I had the same problem with MIDI-Ox but I can select all my MIDI ins and outs...
  84. S

    random tip -- faster naming

    Okay, I'm having problems here and I'm trying to solve them. A little help is needed though. Windows XP and a Midi cable on my gameport controller jack is my setup that works fine for saving my Axe Banks and doing firmware updates. But this little rename thing here just doesn't send the names...
  85. S

    XLR Outs too hot?

    If the mixer is already turned down (as described above) and still clips the input, you should start turning down the output knop .
  86. S

    XLR Outs too hot?

    Okay, I'd give the easiest solution a chance. Turn down your Output knob on the front until your signal level is fine for the board.
  87. S

    axe-fx with headphone....

    The Axe does not have a headphone out. The outputs produce line level, but not enough to drive a headphone. So you'll have to consider using a headphone amp or a little mixer to hear your Axe correctly.
  88. S

    Mixing guitar, vocals and band to IEMs?

    We're so far using the Main Out signal of the FOH (which is actually a small Behringer on stage with us). You could also use one of your FOH mixer's Aux/Mon sends to create your personal monitor signal with as much of your voc and guitar you need and the rest of the band (supposed they all are...
  89. S

    How do you use input2 for <anything other than your guitar>?

    Guess what, happened to me too the first time I tried to feed a second guitar and happened again when I had to find out the output2 knobs are there for a reason ;)
  90. S

    Exagerrated Chorus Effect

    Since someone will have to ask that question anyway I might ask it now: using the editor? if "yes", try the same thing just with the Axe, Save the patch, scroll to a patch higher than 10 and go back, if "no", someone else please give a hint.
  91. S

    Simulating Guitar-Speaker Interaction in Axe Fx

    Isn't that what the "feedback send/ return" in the Axe is for?
  92. S

    Question about using AXE FX with power amp *AND* PA

    Too late for the gig but if you like to have the effects on stage AND FOH you might consider going though all your patches one more time and route a parallel signal chain "around" the cab sims and either double your effects chain one more time or - not too sure if this would work - send the...
  93. S

    Boss FS-6 connection

    Just for a try, change the polarity on one of the two switches (though I have no idea if that's got anything to do with it, but it's the only thing you haven't mentioned yet).
  94. S

    Boss FS-6 connection

    Well, since my FS-6 works fine with a stereo y-cable (one is the 'global bypass' and the other one is 'tap tempo') into two mono plugs you should check if - both pedals are set up equally (latching or momentary) - poralitiy is the same - your stereo y-cable isn't broke. No other idea so far. My...
  95. S

    Live use routing question

    If you're not running really wild stereo sounds, why not use OUT1 (left) to your QSC and OUT1 (right) to FOH? That might give both of you the chance to adjust the right level.
  96. S

    Guitar doubling?

    I think, that's excatly what he didn't want. So the solution would be to set the delay to 100% wet (I guess you are using the Axe in an effects loop of an amp then).
  97. S

    On which firmware have YOU joined the club?

    When I ordered I guess it was 2.xx or 3.xx, but when I got my Standard from G66 I had 5.19 installed.
  98. S

    FCB 1010 - autodetecting External changed preset range?

    If #001 on the fcb recalls 128/129 (depends if you have your Axe display offset) you have sent a CC#0 to the Axe which changed the bank you recall with the fcb (maybe from copying presets from the X 15 to the fcb?). Turning Axe and fcb off sets it back to normal. There is something in the Wiki...
  99. S

    GCP now starts on 256?

    I just remeber, there was somethin on the Wiki about a CC# for a bank change on the Axe. Can't find it right now, but it's there. So, you can send a bank change message to the Axe.
  100. S

    FCB1010 & AxeFx - strange expression pedal behaviour

    The fcb does not have the same CC# assigned to the two exp.pedals in all the presets. If you always want to have the same CC's you need to reprogram your fcb's. I found this, when I set mine to CC# 7 for Exp.A and CC# 11 for Exp.B for all presets. Works fine with the editor (and I normally...
Back
Top Bottom