Search results for query: *

  • Users: jimosity
  • Content: Threads
  • Order by date
  1. J

    FS AxeFX II, MFC101, Mission SP1, Mission EP1

    AxeFX II (first gen) Ares 2.00 fw, MFC-101, Mission SP1, Mission EP1 - will separate. I recently picked this up to help out a buddy that needed $ quickly but I simply don't have a use for it and know it'll just sit unused. It's been very well cared for an in great condition; sounds fantastic; no...
  2. J

    Is it possible to use 4CM and bypass the 'A' (preamp section)?

    Using the 4-cable method, is there a way to send the input to come in after the (A) amp in the signal path? What I'd like to do is have the input signal skip the preamp section of the amp and go straight to the FX8 output (which goes into the amp fx return).
  3. J

    Rocktron Mainline 1U power amp

    I saw a demo video of the Rocktron Mainline and tried searching around for it on different forums and can't seem to find anyone talking about it. Does anybody know when it'll be available? I've got a Velocity 300, but the way it was described made me think that the Mainline would be more to my...
  4. J

    CAB on RIGHT Output 1 only?

    Is there a way to assign a CAB block to only be active on the RIGHT channel of Output 1; but not LEFT? No, I can't use Output 2 (loop).
  5. J

    Using more than 2 expression pedals

    I currently use an AxeFX Standard with a GCP (two EB VP Jr for CC). Works great, but I'd like to be able to add a couple more CC pedals. I know I could probably just use the Pedal 1 & Pedal 2 input, but is there any way, using midi, to have more than two CC pedals?
  6. J

    Issue with CC pedal not saving saved setting when returning to patch.

    Situation: I'm using the Standard with a GCP with two EBJr's as CCs. Here's my rough example. I have two amps set up like this: I then control which is active via CC by setting the EXP1 state on each of the MIXER block gain controls. I set one for 100% to 0% and the other from 0% to...
  7. J

    Talk Box

    OK - I need a 'talk box' effect and I assume that the AxeFX can't do it (I have a standard) so I know I need to buy one. I have a Rocktron Banshee, but I've not been able to incorporate it into my setup the right way. Can someone give me some advice on how best to set up the Banshee with the...
  8. J

    GCP CC pedal weirdness

    OK - So I have my AxeFX Standard, GCP, and two ERnie Ball VP Jr's connected to the GCP. In the GCP, I have both P1 & P2 turned on, I step on a patch and ensure that P1 is set to CC10 and P2 is set to CC16. I can step on P1 and see the display on the GCP go from 0-127, no issues. I can step...
  9. J

    Amp model names

    I would really like to have the amp model names be what they are intended to be a model of. Not in Axe-Edit either, in the unit itself.
  10. J

    FRFR: Peavey Impulse 1015

    OK - So I know these aren't the greatest choice in the world for going FRFR, but hear me out... I've used my AxeFX as my standalone preamp/effects unit for a while, then decided to go back to my Egnater M4 for tones; pushing off my AxeFX for effects only. While that's working fine, I can't...
  11. J

    Midi merge device, will it do this?

    I use my GCP with my axefx...i have two eb cc pedals connected to the GCP. I have my GCP in 10 button mode, but there are times that i still would like to be able to have some individual on/off effects without losing my full 10 patch per bank setup. If I were to get a midi merge device, could...
  12. J

    EHX 44 Magnum Power Amp

    OK - So I got an EHX 44 Magnum Power Amp for xmas. This guy is freakin' awesome. I was just going to use it for quick band practices with my Line 6 M9 into it, then into a 2x12 cab. Did a 3 hour band practice with it last week and it was incredible. SUPER loud and I didn't have to crank...
  13. J

    1 In to separate outs (one with a cab sim, one without) - independent volumes

    I run guitar into the front of the AxeFX, then want to split my signal so that one output goes to one amp, then branch off the signal after everything else but add a cab block before sending it to the second output. I want totally separate volumes and one output to have a cab block on it that...
  14. J

    Powering my GCP via Midi - help!

    OK - So I use the Ground Control Pro to control my AxeFX. I use a Line 6 PX-2 (same that is used with all of the 4 button modelers) power supply to power my GCP. No issues there, it works perfectly. I want to power my GCP thru MIDI by plugging my Line6 power supply into the back of the...
  15. J

    Peavey IPR 1600 Power Amp + AxeFX

    So, I bought one of the Peavey IPR1600 power amps to use with my AxeFX rig, mostly because I wanted something light and powerful. I have a VHT 2/90/2 that weighs a ton, but sounds like god. I have a Marshall 8008 that is pretty heavy but sounds good. 1U is a plus. I also have used my AxeFX with...
  16. J

    4CM Hum - yeah, again...

    So, I've read a bunch of the other posts about the 4CH hum problem and all that, but I'm still not sure I've come to a conclusion as to how to avoid the problem. Is it an impedance issue? Is it a buffer issue? I'm running: Guitar -> AxeFX Input AxeFX Loop Send to Axess BS-2 splitter BS-2 Main...
  17. J

    Behringer B-Control BCR2000 Midi Controller?

    The one thing that I don't like so much about the AxeFX is when I get a tone that I like; in a live situation, I can't necessarily tweak a few key knobs as quick as I'd like to. I saw this device and was wondering if this would work well with the AxeFX to let me map some knobs to be able to...
  18. J

    Dual signal routing...

    OK - I've searched until I'm at my wits end and can't find what I'm looking for...I know I've seen it before though. What I want to do is have my guitar signal going into the AxeFX -- running thru my pre-effects, then out of the AxeFX to my external preamp - then back into the AxeFX for post...
Back
Top Bottom