Search results for query: *

  1. B

    Configuring at Axe-Fx 3 for wireless (e.g., differential line in on Input 2 "left")

    It's the more engineering term for balanced. The signals appears 180-degrees out of phase on the plus and minus lines instead of a signal line accompanied by a "static" ground line. Well done, they can mitigate ground loops. Reasonably done, they ignore coupled noise that couples onto both the...
  2. B

    ML Mars PR Cab Packs | IR's based on four Marshall™ pre-Rola™ Greenback cabs [ML Sound Lab]

    Bought the entire pack and NOT disappointed;) Your demo is right on the mark and I too love the H55! So easy to find a great sound with these IRs... Highly recommended if this is your style. Thanks for your efforts
  3. B

    ML Mars PR Cab Packs | IR's based on four Marshall™ pre-Rola™ Greenback cabs [ML Sound Lab]

    I don't know how long I can hold out. I've owned the Scumback versions of the H55 and H75 and they were my goto speaker(s) - they were paired in a 2x12. The samples here sounded so close to my speakers (on my HS8 monitors), so good that I'm drooling :) I used them mainly with my Metro JTM45 I...
  4. B

    New Axe-Fx III and Couldn't be More Grateful!

    Started this journey with Fractal maybe 2007 with the original unit. Still have my II. The Fractal crew have really outdone themselves with the III. Refined, polished, easy to use in all respects. Bravo Fractal, well done...Again
  5. B

    What will you do when no more firmware updates?

    I didn't vote because none of the answers fit my circumstances. I love the DSP audio technology and have most of the competitors current offerings as well as the MK 1. Obviously I am not in need of any updates from anyone and I hardly have time to turn on the Mk 1 these days with so many...
  6. B

    Amp for Axe has a "Fixed 10k Ohm Balanced Input" -> any particular adjustments needed on the Axe ?

    I'm not quite sure I understand your question, but I'll attempt an answer. The XLR (cannon) balanced outputs are 600_ohm line outs and should drive 10K_ohm balanced inputs just fine with no special selections or adjustments other than simply selecting the correct output from the front panel...
  7. B

    Got my Axe Fx.....but not impressed so far.

    Rich, This reminds me of your posts 13 years ago on the Marc Seal Forum; Back then I think you were working up to a Marshall Half-stack in your bedroom searching for that "something". Those of us older than you saw you making the same mistakes we had made. I wish that an internet forum or piece...
  8. B

    will I be missing anything by using 5" monitors?

    There are times I really miss Jay. He was willing to jump in and point out the serious, physics-based flaws in arguments like many above and tolerate the inevitable noise. I'm not going to wade into this because I won't engage in the too predictable exchanges. I would suggest some basic reading...
  9. B

    Questions about Dynamics, Pickups and IR's

    You probably already know this, but two things not mentioned so far that has a dramatic impact on dynamics are speaker size (not the IR) and volume. You won't get great dynamics at real low volumes and certainly not with small monitors. just sayin, boogie
  10. B

    Verify Preset Version?

    Well, my wording was not exact. It reads *exactly* " *** Warning *** Factory Presets Not Installed Correctly Press Exit To Continue" Support has also verified this for me in the past. It occurs intermittently after turn-on of the unit. Support gave me the "secret" way to fix it, but alas it...
  11. B

    AxeFX still dead after 4 months

    I had one of the very early Axe-Fx IIs and it intermittently hung or froze on turn on. The factory replaced the oscillator and it fixed the issue.May not be related to the OPs problem as his sounds constant.
  12. B

    Verify Preset Version?

    Maybe brain-fade on my part, but how can I verify the version of the Preset Banks in my A-Fx II ? I loaded the latest version banks and got a warning about factory presets not loading correctly (once). Now the presets look odd to me (old). thx boogie
  13. B

    Simplest Recording Program?

    Thanks all. I used Audacity years ago and have forgotten its interface; I'll give it a look.
  14. B

    Simplest Recording Program?

    I almost never record, and the last time I did was with Reaper. Reaper was great but its power made it a bit cumbersome to use for a "quick and dirty" recording - especially since I have not used it for years. Finally, I have a new computer and Reaper is not even on it. A friend wants some...
  15. B

    Fractal Audio AMP models: Deluxe Verb ('65 Fender Deluxe Reverb, AB763)

    No denying how many recordings and performances have been done with these amps. Sadly, after owning several of them (including the re-issue), I've never been able to get them to take pedals well unless I modified them a fair amount. I do like the Fractal results better than the actual amps I've...
  16. B

    Axe-Fx II "Quantum" Rev 2.01 Public Beta

    Since a 5F1 tweed is a single-ended, single power tube, it's hard to understand how it could not be class A and still be usable for audio? I can understand push-pull guitar amps as you've stated.
  17. B

    Marshall type tones in the Axe FX -- How Good ??

    Asking questions like this on the manufacturer's forum invariably produce glowing, hyperbolic responses. While I usually try to avoid responding to questions like this, I'm compelled. I'm a big fan of Marshall-esque tones and I've built plexi's and JTM45s along with numerous tweaks and circuit...
  18. B

    10k vs 100k expression pot for Axe II or MFC

    My last comment on this. I was paid a helluva lot of money over the years as a Professional Engineer to fix signal/power integrity problems. The expression pedal is an analog input on a long cable that feeds into the unit. It is "good practice" to not introduce things like RF into enclosures in...
  19. B

    10k vs 100k expression pot for Axe II or MFC

    From a general engineering perspective, I would suggest using the lowest impedance that will do the job; the lower the impedance the less effectively it will act as an antenna to pick up unwanted noise. good luck boogie
  20. B

    Loading Preset-Cab Bundle?

    Thanks again. I'm quite handy with hardware, firmware and software and don't understand exactly what is going on. Anyway, I more than appreciate your kindness. I have a couple more experiments I can try, but at some point it is diminishing returns for me as I normally stick with my few presets...
  21. B

    Loading Preset-Cab Bundle?

    Thanks. If it's convenient I appreciate it. If it's a hassle don't worry about it - back and hand issues make playing a fairly rare event here. I live near the Long Beach Airport. BTW, I again verified last night that there is no problem loading regular presets. Can't understand why the...
  22. B

    Loading Preset-Cab Bundle?

    So I've never done this and I'm having a problem. I'm trying to load Moke's Longtime Bundle and I timeout getting this error. Latest Firmware and latest Axe Edit using Import button. My unit is the original Axe-Fx II. Tried re-downloading the .syx file. Never had a problem with...
  23. B

    AxeFx: Standard vs AxeFx II

    I sold my Standard and bought a II in order to participate in the technology Cliff was developing. As an Engineer who worked in DSP, and a guitar lover, it has been a blast. The II is extraordinary. However, I personally could live quite happily with my old Standard and if my II fails, I would...
  24. B

    Axe-FX II as Audio Device on Skype

    Been there, done that. I was able to jam with a friend in England over Skype with my AxeFx II simply connected to the computer via USB: worked great. I believe I used VAC, but I can't verify that as I moved to a new computer and I've not configured it to do the same. You can certainly do it and...
  25. B

    Lag with scene changes on quantum

    On our military DSPs when we had something like this we would refer to it as a "feature" or design artifact ! - not a bug. We had a lot of design artifacts.
  26. B

    1960TV Cab (Basketweave TV mix)

    Take a look (listen) to Scumback Speakers. When I went looking for the aged Celestion sound, they hooked me up. They can do the aged speaker sound and the cabinet as well. boogie
  27. B

    Axe-Fx II "Quantum" Rev 1.00 Public Beta

    Hmmm - a Schrodinger paradox whereupon users become Fractal-entangled upon updating with Quantum firmware :-)
  28. B

    USB Ground Loop Isolator - Full speed or High Speed?

    I have not designed equipment to USB specs for several years and I no longer have the detailed interface specs. I don't recall the interface grounds having substantially different grounds than the main devices that use them. If you plug the Axe-Fx and the sending computer into the same grounded...
  29. B

    OH MAN NOT AGAIN!!!

    I skipped the Beta, but when I up-dated to the latest firmware I had to reset my noise gate on all patches; I was definitely getting the "normal" hum/buzz one gets with the Axe or normal amps and the noise gate was essentially off. Reset to my old settings and all was fine. Actually, the change...
  30. B

    18.01 sounds different than 18.00 b7

    Sounds like a creative working interpretation of Occam's Razor to me; a philosophy I subscribe to whenever possible. boogie
  31. B

    Hideaway | Performed by Scott Szeryk - Live | Blues Guitar | Axe FX 2

    Seriously fine playing and performance Scott. Material's not so bad either ;-)
  32. B

    Objektive sound comparison: Fw17.04 vs. FW18 (G3)

    So someone has to say it... This is a subjective, not objective (objektive), comparison since it relies on the listener to measure or interpret the results. An example of an objective comparison would be FFTs or something based on data, not interpretation. Objective seems to seldom solve audio...
  33. B

    Axe FX vs Mesa Mark IV 12" combo

    I've said it before in threads like this; If you can afford to and have the room, keep the tube equipment (esp. your woody Mark IV!): it's art. I love my AxeFx II as well, but when the modern DSP stuff breaks, more often than not it's off in the mail to the supplier for repair (not conjecture...
  34. B

    Anyone Want to Test This Beta Firmware

    You might be conflating a couple of concepts. The technique Cliff is providing simply removes any amplifier artifacts from the final speaker/cab IR. What we want is a "faithful reproduction" of the speaker/cab combo without any other influences co-captured. Guitar speakers (and their cabs) have...
  35. B

    ODS Ford???

    Good grief. Mods, there's nothing redeeming in this exhibition of typical internet forum bad-behavior. Time to lock it up and put it away perhaps?
  36. B

    Merry Krampus

    Thanks Cliff. Hope you and the Fractal Crew enjoy some quality downtime. health, happiness and peace to all of you in 2015 Brad
  37. B

    Powering my GCP (Phantom Power) from AXE FX II

    My GCP Power Supply/adaptor is 9VAC @ 500mA. This is the original Wall Wart Voodoo Labs shipped to me. I've never tried to power my GCP via the MIDI cable (you need a 5 pin cable according to the GCP manual), so I cannot confirm everything is OK or not. Glancing at both the AxeFx manual and the...
  38. B

    Windows, Skype and Axe-Fx II

    It would seem that Virtual Audio Cable will do OK. If others have alternatives, happy to hear them. peace boogie
  39. B

    Windows, Skype and Axe-Fx II

    I have a friend I'm doing Skype with. He has a MAC and a Yamaha THR (USB 2.0) and I have a windows 7 desktop with a USB Cam/Mic. He can talk using the built-in mic while playing his THR over the USB. On my Windows Desktop, I have to choose which input Skype uses: the USB-MIC or the AXE-Fx: not...
  40. B

    Thinking of dumping my Bogner

    I'm going to suggest you keep the amp if you can. As someone mentioned, you can use a Torpedo, power brake, power-scaling etc. for the volume issue. BTW, I find I need about the same volume to sound good with the Axe-Fx as I do with my tube amps if I want to get the right feel/punch and sonic...
  41. B

    What gets damaged if the MFC-101 is disconnected while connected to Axe-Fx II?

    So one of the things I used to do was write design rules and check our designs for power sequencing; that is basically what you are discussing here. Usually, using robust design techniques up-front, you can avoid this sort of user inflicted damage: sometimes you cannot (at least practically)...
  42. B

    Ruminating on Selling Amp Collection

    This question varies by individual and their circumstances. I've been a Fractal Axe devotee since 2007 and still have an AXE-FX-II. Fractal is a great company. However, things happen and my AFX has been back and forth across the continent a few times and I've been without it for ~ 2weeks each...
  43. B

    Strat + Plexi FW16 is mighty woody...

    Sounds pretty good. I wish I was set up to record my amp; I have my modified Metro JTM45 build with KT66s and a pair of Scumback speakers a few feet away. You ain't heard a woody Plexi sound 'till you've heard one of these :-) I'll have this amp till the day I die. IMO...YMMV of course, etc. boogie
  44. B

    Finally about to upgrade from the Axe Ultra to the Axe II

    As a long time owner of a Standard and then a II, I strongly suggest if you get a II, get the extended warranty. I won't comment on the tone or feel differences as they are too subjective: others will. boogie
  45. B

    Axe "crackle" repair cost

    I hope you don't have what I had! I had a snap-crackle-pop (you can search my posts) that *was not* my local environment nor was it related to the Mac issues (PC user). I was fortunate that Fractal covered mine under warranty, so I can't tell you how much the repair cost. What I can say is that...
  46. B

    Unreal Support

    I had an AxeFx II issue that had been bugging me for a couple of months and decided to contact support. It was 4:10PM EDT today, a Friday. Six minutes later I had an auto-response that assured me it was received. Four minutes after that, 4:20PM EDT I get an in-depth personal response from Sean...
  47. B

    Cliff, Oh My...The Swirl!

    So I have not been playing a lot for quite some time. Decided to load up 15b and give it a drive tonight. I went through a couple of my Fender/Marshall presets and was astonished at the dynamic swirl I was hearing. Absolutely amazing in that it sounds like some of my tube amps have (and do) when...
  48. B

    EPROM time again

    It's not a problem for one unit vs. another. The issue is that they, as a device/technology, are too frequently of modest reliability (I'm trying to be diplomatic). We used Flash EPROMs, and their predecessors, for many years and they were always a reliability problem. Failure analysis always...
  49. B

    Guytron Gt100

    I recently encountered a Guytron GT100 for the first time and must say that I'm very impressed. I've built and modified amps for over 30 years (still have several) and have been an Axe Fx owner since 2007. This is the best "any volume amp-only distortion" I've encountered. Having an EL-84...
  50. B

    V10 Update

    Festina Lente
  51. B

    Scumback Sprakers IR

    I have a couple of Jim's speakers in my 2X12 that I use with my Metro JTM-45. They are my touchstone sound. Needless to say, I love Scumbacks!
  52. B

    Version 10.0 Sample

    Yikes! Seriously fine.
  53. B

    DSP/Digital Sound Design Courses - Free

    Free college level courses. https://www.coursera.org/courses See: Intro to Digital Sound Design Very basic, but could be helpful for non-engineers/scientists Digital Signal Processing A more rigorous introduction for those with basic linear algebra and calculus under their belt...
  54. B

    Crackle, Pop Vinyl Record Noise Solution?

    Hi All, As indicated I'm moving this offline to discuss with Fractal. Matt said the users in the thread I referenced have a characterized USB issue, not a problem like I'm describing. My problem is intermittent and requires a lot of time to duplicate, so where I go from here is not decided...
  55. B

    Crackle, Pop Vinyl Record Noise Solution?

    Hooked up the unit this AM anticipating a call from Matt. Noise started after about 50 minutes and I tried your suggestion to no avail - obviously more quiet (without otherwise compensating volume), but the snap, crackle pop was still there when notes were processed (noise gate off). enjoy...
  56. B

    Crackle, Pop Vinyl Record Noise Solution?

    Thanks kerrlehr. I have volunteer commitments that pretty much consume my weekends. I'm supposed to work this problem with Matt, so hopefully the issue will be isolated and resolved. thx boogie
  57. B

    Crackle, Pop Vinyl Record Noise Solution?

    Kush, I appreciate your thoughts. This is the first problem on this unit: My first unit had the infamous start-up (due to a batch of oscillators that did not like to oscillate) from day 1 and then the fan failed (also a common issue), then it had an issue that I won't go into. My environment is...
  58. B

    Crackle, Pop Vinyl Record Noise Solution?

    Bump because I can't believe there were so many users with this problem a couple of months ago, yet nobody who has a solution or had Fractal fix it. Perhaps all those troubled units were sold? kerrlehr: When I can get some time I'll pull out the AxeII and try your suggestion. It is intermittent...
  59. B

    Crackle, Pop Vinyl Record Noise Solution?

    So I noticed these threads back months ago, but paid little attention to them. I was a senior dsp hardware guy specializing robust design and in solving tough customer problems and I know how customers descriptions etc. can be misleading. Well the joke is on me because now I have the Vinyl...
  60. B

    No word from support...perhaps not in today?

    I sent an email to Support at 9AM Eastern Friday and I've not heard anything, so I suspect they were tied up Friday. My past experience was always fast and excellent and I have no reason to believe that has changed. I'll follow-up Tuesday of next week if I've heard nothing by then.
  61. B

    Software for viewing IR freq reponse

    I simply used Octave and did an FFT on the IR file(s). Works great and it's free. enjoy the process, Boogie
  62. B

    Attempt at Sloe Gin - Joe Bonamassa

    Outstanding job, both tone and technique. I'd also love a peek at your preset :-)
  63. B

    Engineers or Techs Interested in DSP?

    Actually, it's been the future for a while now... I started my EE career at Hughes in the mid 70s and they patented the Programmable DSP then :-) We were actually flying Digital Signal Processors in the F15 fighters at that time as part of the fire-control radar. I worked in the Digital portion...
  64. B

    producers/sound engineers - share some tips on removing that 'metallic' reverb sound

    Try a search on User "Radley" and the term "reverb". Over the last couple of years he's really helped a lot of us get more from the reverb adjustments than just about any other source. enjoy, Boogie
  65. B

    Axe-Fx II Firmware Version 5.00 Up

    I'm not prone to hyperbole, so I'll simply say... Bravo! Oh, Thanks!
  66. B

    High end fizz...is this normal?

    I don't have the motivation to read this entire thread, but I think this is what is being discussed. It may well get back to the "knock" that Cliff was discussing finally identifying/modeling. Blocking Distortion Interesting reading anyway for folks not familiar with Aiken's excellent site...
  67. B

    Need a hand identifying an EMI/noise issue

    Well the power company *might* get away with trying to ignore your problem if it is completely isolated to your guitar rig, but I suspect if you can get an AM radio (or terrestrial TV signal) and show it picks up the noise, the FCC will have something to say about it! See if you can network...
  68. B

    V3 Plexi help

    You are not alone in some struggles with the Plexi model. Actually, I also had a bit of a time with the last firmware upgrade and 3.0 is even more challenging for me. I run my plexi models like I do my real Marshalls (Plexi and JTM45): MV all the way up (as they don't have them), and with gain...
  69. B

    Dennis Ritchie is dead.

    After I read this I turned to my bookcase and appreciated my *old* copy of Kernighan & Ritchie, "The C Programming Language". He was an integral part of entering C-programming for many of us a few decades ago.
  70. B

    Just how good is the Axe-fx II modeling???

    It's good to see you avoid the pitfall of excessive hyperbole when making your point :-) We all hope you and everyone else that wants one gets an Axe II sooner rather than later. Good luck!
  71. B

    Axe II display flickers

    I've had exactly the same problem with my Axe II. Two issues have stopped me from pursuing it: I don't know how repeatable it is (it doesn't always do it) as I don't sit around and watch the display and I already had to send my unit back to Fractal for some rework and I really don't want to do...
  72. B

    Axe-Fx II Firmware Version 2.00 Up

    Seriously good update. Some of my patches feel like they have a faster attack and more brilliance, some have a new snarl on the big E and A strings. The HiWatt and Solo (existing) are even more badass than they were. The Triode Hardness seemed to work backwards from the release description -...
  73. B

    USB Audio and Reaper Question

    Check out the other threads for ASIO4ALL and see if that solves your issue.
  74. B

    Tranformer Drive

    A seriously good tip/reminder. I had fiddled a bit with this parameter when trying to sort out my Plexi model, but now I realize it deserves more attention than I gave it. Thanks
  75. B

    Fan is changing speed and noisy

    My Axe-Fx II fan was making weird noises as well as changing speeds then it died completely. FAS replaced it and all is well at this point.
  76. B

    Plexi Treble and the Bright Cap

    Big fan of the Plexi2 model. I brought this same problem up a couple weeks ago. Javajunkie was kind enough to provide the Gen I parameters: lower damp to 4.76 change bright cap value to .22 xformer high = 14965 hi freq res and low freq res = 5 pres freq = 1200hz tone location = post sag...
  77. B

    Input Impedance (Auto)

    My interpretation is different. The way I read it, the Instr Input impedance is changed based upon the first effect in your *patch* so that the guitar looks into a more representative load (the first effect) vs. the amp's input impedance. So if I'm correct, your analog pedal is now looking into...
  78. B

    We Lost a Long Time Moderator?

    Wow, a lot of responses overnight! I'm not on the forum with any regularity and it sounds like I simply missed out on some controversy that resulted in Jay leaving or being asked to leave. So be it. Thanks all for the info. boogie
  79. B

    We Lost a Long Time Moderator?

    Looks like we lost one of our "old timers" in the last month or two (joined in 2007). While he preferred not to practice a lot of diplomacy, as an older Engineer I appreciated his willingness to educate the less technical board members despite the flak that often ensued. Perhaps he will still...
  80. B

    Ultra or II

    I've owned a Standard since 2007 and recently bought a II. I would not argue with any of the reasoning given by others in this thread, and since you said budget is not an issue, the II sounds like it may be a good fit. One thing *not* mentioned is product maturity and stability. I specifically...
  81. B

    SLO warren haynes mod

    +1. That will do it.
  82. B

    Questions for those who switched from the Ultra to the II.

    I can understand the OP (and others) viewpoint. I had 6 or 8 of my favorite patches setup on my Standard and they were fantastic. I can't recall how many minutes or hours I may have put in to refining them, but I did not do much tweaking as updates came out. My II has already demanded more...
  83. B

    Trouble powering on the Axe-FX II

    Analog Devices has published silicon anomaly lists for these DSP chips; I suspect you already know that since you mentioned their DLL/PLL start-up issues. I'm sure Cliff is far too busy to enlighten those of us that may be interested in more details. If he knows more than the errata and anomaly...
  84. B

    Trouble powering on the Axe-FX II

    Just received mine today and had the exact same problem. First power cycle did *not* clear the issue, but I powered-off, unplugged everything, then recycled and it was OK. Instead of each of us contacting support, perhaps you can share what they suggest? thx Boogie
  85. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    Thanks guys; I'm a very lucky fellow!
  86. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    Well I *thought* I was out... Wife jumped the line and bought me one today at about 10:30 PDT - She's a real keeper ;-) Good luck to all
  87. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    I'm out. Not sure I'm wanting a II at this point and I no longer check the forums or store. *Thanks* for the efforts you put forth on all of our behalf. Hope you get one soon and enjoy the heck out of it. Boogie
  88. B

    Analog vs. USB recording in Axe fx II!

    I don't have a dog in this fight so to speak, but I've noticed a strange shift recently. A few, some high profile, Axe users advocated analog out over S/PDIF for recording in the recent past. However, with their new AXE II, they are tossing up recordings and glowing about the positive attributes...
  89. B

    store will be change or upgrade..

    Unlike many folks, I don't do PayPal (and never will). If a PayPay account is required in the new store, I'm out. There will be one less on the list and I'll stick with my Standard! One more II for the rest of you ;-) enjoy boogie
  90. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    Wife said she would augment my attempts, so we'll both try when we can this week.
  91. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    I think without a heads-up here on the forum, it's not going to work for me (at computer but doing real work). I'm out good luck boogie
  92. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    I've not tried yet, but I have some time today where I need to be at my computer for fairly extended periods time, so I'm going to give it a try. Thanks boogie
  93. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    Thanks or8ital. It's clear you've been doing the heavy lifting in this thread and everyone who follows it owes you a debt of gratitude. Thanks! Boogie
  94. B

    The "Official" unofficial Axe Fx II US Purchase Availability Thread

    Is the first page in this thread the best source for times the units have been put on the store? I don't plan to play the F8 game, but if it slows down I might consider giving it a couple of tries now and then. Thanks and congrats to those who have units :-) Things have improved since my last...
  95. B

    Right and Left sides sound different when using 2 processors

    The Mixers are unique to each side (left/right) so don't overlook swapping those. Put the mixer from the "better sounding" right channel(s) over on the left channel(s). Yes I understand they are identical, but something is different and these should not be overlooked. enjoy
  96. B

    Marshally Clips

    Absolutely brilliant. Well done. I don't know which is which, but it demonstrates exactly what I've suspected: there's plenty of joy left in those Standards and Ultras folks. Thanks
  97. B

    Ultra or AXE-FX II

    That's exactly right. Same goes for the Standard. Some folks need to go back to the Fractal Artist page and re-read the comments by some of the most discerning players in the business: words like flawless used for the existing technology. I may in fact go to the new processor for fun, but there...
  98. B

    Ultra B-Stock in Stock

    For anyone who is not caught-up in the II frenzy and may be looking for a deal on an Ultra... I was able to add one to my cart (then subsequently removed it) a few minutes ago. It might make sense if you want a warranty, but obviously there is a glut of cheaper used ones at the moment $150-200...
  99. B

    Will you buy an Axe FX II?

    I did not vote since there was no category I identified with. Being a techie and early adopter with the money available, I could get one as soon as they are available. However, I'm quite happy where I'm at with my Standard so I will take a wait and see approach. I don't personally need or want...
Back
Top Bottom