Search results for query: *

  1. Paulo Remigio

    Post Your Axe-Fx III Rigs Here!

    The Fractal is an amazing tool, I use it all the time, but ... Yes, I still love my tube amps and can't get around to part with them, still love to dial some good old fashion knobs and play through an amp and cab whenever I get the chance.
  2. Paulo Remigio

    Post Your Axe-Fx III Rigs Here!

    thanks, it'm my "happy place" hehe got a couple more stuff in the room, over 30 years collecting
  3. Paulo Remigio

    Post Your Axe-Fx III Rigs Here!

    Here's my home setup
  4. Paulo Remigio

    Axe-Fx III Firmware 22.00 Release

    This is so rewarding, makes my GAS happy ... I love my AXE FX!! 😻 ... and Cliff 😻
  5. Paulo Remigio

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    YES! Making modelers great again! :tearsofjoy:
  6. Paulo Remigio

    FM9 Turbo Problem, cant save config settings, like naming my device.

    I like the way you think .. this could be an upgrade to the ol' altoids box :tearsofjoy:
  7. Paulo Remigio

    Axe-Fx Firmware Version 21.00 Public Beta #2 (Beta 2)

    Fixing resistors and adding obscure parameters and what knot ... you guys are absolutely insane :oops: ... and that's why we LOVE IT!!!!! :D🙌
  8. Paulo Remigio

    Compact pedal sized stereo power amp for FM9?

    The Harley Benton is 100w into 8ohms or 190w into 4ohm, it's reportedly similar to a 33w tube amp. I have a couple and they're loud enough to gig with, but you're right about the response, they're not flat. But you can't use the onboard EQ and sorta sort that, but heck, for the price there's...
  9. Paulo Remigio

    Compact pedal sized stereo power amp for FM9?

    The Harley Benton GPA-100 is very cheap and has a lot of power for it's price/size. It's not very transparent imho, but you can eq it easily. It's a solid buy, and you can't go wrong for the price.
  10. Paulo Remigio

    FM3 As Pedalboard with Backline

    If I was presented with this situation, I'd just bypass the cab block and plug straight into the FX loop return of the amp as that usually sounds pretty good. You can also add an EQ block to tweak it to taste.
  11. Paulo Remigio

    [implemented] Klon Centaur drive block model as in Axe FX III

    +1 for me .. I miss it more than extra footswitches :tearsofjoy:
  12. Paulo Remigio

    FM3 Slow?

    Yes, I also noticed that, heavy presets makes it even slower. I believe that, that's why I got it. I was ok with the unit not being able to reproduce very heavy presets, but I wasn't aware of the performance difference on the switching and menu's, it is noticeably slower and I didn't knew...
  13. Paulo Remigio

    FM3 Slow?

    Compared to the AXE3 it's night & day, there's a huge difference. I'm trying to figure out if it's something wrong on my end or if it's just what it is.
  14. Paulo Remigio

    FM3 Slow?

    I'll try to reinstall the firmware, thanks. As @hubula mentions, it feels sluggish .. I press a footswitch and the sound doesn't change instantly like the AXE3 does. The buttons and menus have the same slow feeling compared to the AXE3, kinda like when you have a slow pc or something.
  15. Paulo Remigio

    FM3 Slow?

    Hi guys, I've been using an AXE-FX3 for a few years at home plugged into the pc/monitors and live with an FC12. I decided to get an FM3 for practice and small gigs, just got it today, firmware is 5.03. I immediately noticed how slow it is changing scenes and presets, compared to my AXE-FX3...
  16. Paulo Remigio

    Axe-Fx III Firmware Version 20.03 Release

    Sounds just right, I can almost hear the diodes sizzling under the goop! :cool: Joking apart, some sort of Klon has been my goto drive boost for years, I love it .. a now I have it in my Axe! I feel totally spoiled with my AXE-FX3 ... if I knew this was going to be the level of service when I...
  17. Paulo Remigio

    Axe-Fx III 16.00 Beta 5 "Cygnus" Firmware - Public Beta #2

    Thanks! My miss :(
  18. Paulo Remigio

    Axe-Fx III 16.00 Beta 5 "Cygnus" Firmware - Public Beta #2

    Not sure if this has been reported yet, but I encountered some issues after updating. Some of the amps I'm using on a couple presets (not sure about others) are defaulting to different amps, I could not get the USA IIc++ to work and the JVM OD1 Red neither, also. Not sure if this is a random...
  19. Paulo Remigio

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    What the f... just happened!? :oops::oops: .. My AxeFX3 sounds soooooo amazing now!! :eek:o_O
  20. Paulo Remigio

    AFIII Anti-Climax

    Just messing around with some different amps on AXe-Fx3, mostly the Super Reverb and a Mark2c+, and my 54 reissue Strat. I haven't recorded and mixed a full tune since ... last century! (literally, lol), I'm new to most of the software and techniques, it's all so much easier than back in the...
  21. Paulo Remigio

    Simple pedal platform + extras (Deluxe reverb based)

    I created this simple pedal platform to run my pedal board into the Axe-fx3 and test pedals. The results where so cool decided to expand and created created 8 scenes raging from dry to wet to some mild OD's and rock OD's and even a couple lead sounds so it can be used as a standalone preset...
  22. Paulo Remigio

    Axe-Fx III Firmware Release Version 12.09

    The bar keeps getting higher ... eventually they will model Eddie's fingers in front of all this goodness ...
  23. Paulo Remigio

    Mesa Mark IIC+

    @Gilesy I'm happy this inspired you! Post what you come up with so maybe other II users can enjoy it too.
  24. Paulo Remigio

    I use studio monitors all the time

    I've played my Spirit Folios for years (10+), like .. pretty much every day ... and ended up retiring them without any perceivable damage. Speakers are durable as hell, as long as you play them within their designed limits.
  25. Paulo Remigio

    Mesa Mark IIC+

    Sorry, I only have the III, not sure if there's any backwards compatibility possible also.
  26. Paulo Remigio

    Mesa Mark IIC+

    That was the main idea, to have a simple preset that covered a lot of ground. Many get lost in these huge ecosystems and end up getting frustrated, I know I've been there, I hope these type of presets can get them going with something straightforward yet versatile.
  27. Paulo Remigio

    Mesa Mark IIC+

    Here's a very straightforward preset, rock/metal with some cleans, some crunch, some higher gain and a couple lead patches.
  28. Paulo Remigio

    90's inspired preset

    Hi guys, Been developing these sounds for a while, it's my main go to preset for jamming and general fiddling around, sounds good on my CLR's but also translates well into other systems i've tried (studio nearfields and into a 4x12 with the cab block disabled). Check it out and let mw know...
  29. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    És muito bem-vindo Pedro :)
  30. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Here's the patch, in case anyone else wants to use it. Cheers guys.
  31. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    Sure guys, here it is!
  32. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    @George Koerich the master volume was higher on the model, that may account for the extra compression. Apart from that, all the model settings are the stock ones, I only edited the basic and post EQ pages.
  33. Paulo Remigio

    Monsters Inc.

    Here's my latest take on those late 80's and 90's rock/metal tones many of us enjoy. I included 4 amps for different gain stages and flavors, both a rhythm and a lead scene each.
  34. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    @shatteredsquare, the sound is a bit closed/dull because of my IR choice and very sparingly use of fx (only a slight delay, no reverb at all) its not the loadbox's fault.
  35. Paulo Remigio

    Changing

    Not sure what you mean by non-linear o_O It matches both the amp gain structure and dynamics and will be eq'd/shaped by whatever you have on the mix, so the miking is extremely important and will have a big impact on the final result. The best profiles are usually put out by recording...
  36. Paulo Remigio

    Axe-Fx III Firmware Version 2.03

    Wow, you guys don't sleep ... Thank You!
  37. Paulo Remigio

    Wish Dimebag Darrell Rig

    Don’t get me wrong, I would love a Randall model also, I really dig those amps, but we can get very close to Dime’s tone with what we have available already.
  38. Paulo Remigio

    Wish Dimebag Darrell Rig

    Check this out: https://forum.fractalaudio.com/threads/dimebag-darrell-patch-pantera.125116/
  39. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Ok, I got it, thanks for the explanation! There’s no way to know what Mr Friedman was thinking, but maybe there’s some reason behind his choice. Sometimes is an availability/cost issue, but I don’t think this is the case at all.
  40. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Amp settings:
  41. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    Amp settings: (disregard the clean channel, it’s the bottom row and the graphic eq that count for this scenario, also, amp was set to mkIIc+ mode)
  42. Paulo Remigio

    Changing

    Want mine? It's for sale! :D
  43. Paulo Remigio

    Favorite Clean amp in the III?

    So far, the 59 Bassman, I just love it, but I can't say I've tested them all yet, not by any means.
  44. Paulo Remigio

    AFIII Mesa Boogie MarkV:25 vs the Axe-Fx 3 USA IIC++ Model

    Here's another small clip, this time I'm comparing my own Mesa Boogie MarkV:25 to the AXE-FX 3 USA IIC++ Model I inserted the AMP into the AXE-FX 3 using a Two Notes Captor loadbox, everything else (all FX and CAB IR's) are the same, for a fair comparison. In my opinion, the AXE-FX 3 is even...
  45. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    No idea what you just said :D
  46. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    No this is the standard, the 2018 is a another sound, less gain, slightly different voicing, maybe a bit thinner, not sure. My amp is a 2016 model with the gain structure mod added, also has the sat, fat and c45 modes, all of them disabled for this comparison purpose. It’s an awesome sounding...
  47. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Not sure if you’re being sarcastic, LOL :) I intentionally did it this way because I honestly don’t see the point of comparing amps using different cab setups, it would be impossible to conclude anything other than “I like A or B better than the other one”, it would be totally subjective. I...
  48. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    It's recommended (in the manual, actually, if I recall correctly), to push hard on the bass on the BE100, it's the way this amp was designed I guess. This!! Totally agree.
  49. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Settings on the BE100 where very similar to the model, apart from the treble, which was significantly higher on the BE (around 2'o clock) There's no High Treble knob and no Bright switch on the real amp, so I guess that was the trade-off. Sounded closer this way, that's why I set it up like...
  50. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    This was my setup, also you can see my model basic settings bellow: My CAB setup, for both amps
  51. Paulo Remigio

    AFIII Friedman BE-100 (HBE channel) vs the Axe-Fx 3 HBE Model

    Here's a small clip, comparing my own Friedman BE100 (HBE channel) to the AXE-FX 3 HBE model I inserted the AMP into the AXE-FX 3 using a Two Notes Captor loadbox, everything else (all FX and CAB IR's) are the same, for a fair comparison. In my opinion, the AXE-FX 3 is amazing at recreating...
  52. Paulo Remigio

    High Gain Monsters

    Here's some chunk & lead sounds I created, heavy stuff, meant for medium output humbuckers, mostly. I spent quite a bit trying to get a cool CAB combination, let me know how this sounds in your setup.
  53. Paulo Remigio

    Handling Multiple Outs

    My thoughts exactly when I did it. I've done some comparisons and I can't really tell, to be honest. That's a very interesting idea! Monitoring FX through the Axe-FX but leaving them out on the traack to be added in the mix stage only. Nice one! I was considering adding a second split, right...
  54. Paulo Remigio

    Handling Multiple Outs

    Nice catch. I checked and you are correct, I was losing stereo. Thanks for the tip!
  55. Paulo Remigio

    Handling Multiple Outs

    I love the Axe-Fx 3 capability of handling multiple out's and different scenarios, the flexibility it was one of the main selling points for me. I mostly run a dual output configuration: - Out 1 goes stereo to FoH / Studio - Out 2 goes mono (Left only) to input A of a Matrix GT1000X set to...
  56. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    Now you're just being a prick. Well, good day to you!
  57. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    Not really, tube amps put out an amount of noise, much more on the gain channels, even without signal applied. Just turn on an amp, plug in a guitar and dial it to zero, turn to the gain channel, add gain and add enough volume, it's there. In every amp. When you apply signal you get all sorts...
  58. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    C'mon, you're nit picking my words. I also get hiss from the amp with the guitar plugged in and the volume down, duh. Amps put out noise, that's just how it is. That "regular" noise is to be expected and can be corrected with a noise gate. Where I absolutely agree with you is that most of the...
  59. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    I do get noise on my tube amps gain channels without the guitar plugged in, but it's mostly hiss, not hum.
  60. Paulo Remigio

    Changing

    Hello All, I've been using the Kemper Profiler for a little over a year, I also own a few tube amps and cabs so it made sense to go the Kemper route as I could be able to profile my own amps and record/gig with "them" at a much lower weight penalty. Over the period I've owned the Kemper, I've...
  61. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    If you have any gain on that channel, that would be common. If so, any chance you can't correct that lowering the gate threshold on the axe fx input, maybe?
  62. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    Where do you go from here? You send the Amp Out to to a speaker cab? So it's mostly an integration to use the Axe Fx as an FX processor and have fx before and after the amp's preamp stack, correct?
  63. Paulo Remigio

    Welcome: FC Controllers!

    Hello guys, Sorry if I'm repeating the question, but what's the news on the shipment of the FC's? Anytime soon? I'm on the G66 waiting list.
  64. Paulo Remigio

    Question about a setup idea (with tube amp and LB-2 in loop)

    I've been wanting to test this, my approach would be to have the amp return to the Axe Fx using the FX Send and bypass the power amp section altogether, using the tube amp as a preamp stack only in the Axe Fx chain. I'd use the loadbox only to protect the amp, but I keep the master volume...
Back
Top Bottom