Search results for query: *

  1. GuitarLife

    Can we have separate threads for the thank yous?

    Well to this I just wanna add.. Thank you Cliff, for the hard work. Noooo! I did it again sorry, must be out of controll.
  2. GuitarLife

    Ask for a sound and I do it for You

    How to make this sound, with Axe fx 3..? (Here I mean the clean in the beginning)
  3. GuitarLife

    Who uses just 1 Cabinet IR?

    Maybe if it's 2x12, but it's rare.. If it's 4x12 IR I always only use one. To me it starts to sound more like a stadium stack (8x12) and don't need that for recording..
  4. GuitarLife

    Wish DAW Plugin editor

    Was it not the old 11-rack that had loaded this preset info into the audio file when it was recorded In the DAW? I remember i could recall what ever preset when you used this function over the USB connection.
  5. GuitarLife

    Does Axe FX III needs any load on output jacks when using SPDIF?

    I wrote ´listen´ to and he ask why we should choose, and there of was the answer.. there is not a SPDIF out 1 and 2 in axe fx.
  6. GuitarLife

    Does Axe FX III needs any load on output jacks when using SPDIF?

    Your output setting on axe fx (axe edit) can be diffirent for output 1 or 2, out 1 can be dry and 2 can be et wet. You can choose what out SPDIF will copy (dry or wet). But you prefere maybe to record dry.
  7. GuitarLife

    Does Axe FX III needs any load on output jacks when using SPDIF?

    But we´ll have to choose which type of output (1 or 2) we wanna listen to. SPDIF out will then copy that.
  8. GuitarLife

    Axe-Fx III Firmware Release Version 19.07

    This was correct for my problems some times ago, I now also only use Axe edit to access Fractal-Bot, and never had a problem since.
  9. GuitarLife

    SPDIF input problems

    I would mean that it's only if you're re-amping, the input source will be digital, as far I can tell. Your source from guitar is analog, it is translated later to digital to sound card. That's how I understand it..
  10. GuitarLife

    SPDIF input problems

    In Input config, I have: all my input to analog... Word clock on internal. Digital input source on SPDIF. SPDIF/AES/ Out source on Output 2. This works fine on my gear.. This is UAD Apollo sound card..
  11. GuitarLife

    Axe-Fx III Firmware Release Version 19.05

    About "scene ignore", we will then have to dedicate a switch button (FC6 or FC12), to change the channel, if we want to go to another channel, when it's active? Right..? But we can just change scenes to go back again.. Could be useful, but in the moment, I don't see how this would be helpful.
  12. GuitarLife

    Manage unused channels/scenes?

    I just save all scenes in the preset with the respective channels and they will never go to other channels, because it remember where I saved the channels all the time.. I never had this problem.
  13. GuitarLife

    AFIII My new song "Dropped" - (amp Bogner Blue Modern)

    I like it a lot..good nerve and rock 'n roll..
  14. GuitarLife

    Always wanted one of these......

    Runt 50? Isn't it just a BE 100, but just 50w?
  15. GuitarLife

    Axe-Fx Firmware Release Version 17.01 Public Beta #2

    Now success.. Thanks! -I tried both, but I had the latest Fractal bot 3.0.11.. It must be Axe edit have to be closed. I didn't know that..?
  16. GuitarLife

    Axe-Fx Firmware Release Version 17.01 Public Beta #2

    I continue to have this error, when I try to install 17.01 public beta 2. I think it must be 7-8 times now Any others who experience this? USB is sure connected, I can see Axe edit communicates. I also have an empty preset on Axe Fx, when file is installing. Is this it..?
  17. GuitarLife

    Why does a "side" Reverb block at the end of a chain, right before the output so different/great?

    Oh yes sure..of course, this is the workaround. I do this a lot.. But I just see it as it will give 100% completely control over those effect in serial.
  18. GuitarLife

    Why does a "side" Reverb block at the end of a chain, right before the output so different/great?

    Maybe there should be two modes for the "level" and "balance" -knob, particular in delay and reverb block? Mode1 is as now, its effects all the signal, while mode2 would effects ONLY the wet signal. Mode2 will then not effect the dry signal, at all.. Just a suggestion..
  19. GuitarLife

    AITR

    +1 Whole my bank user 2 is empty, so for me it would be a yes to IR FR - Most of my IR I have purchased is on my computer. I test a few sometimes.
  20. GuitarLife

    AFIII Original: “Bulletproof” (Instrumental)

    Sound pretty good.. I like it a lot.. may I ask if this is recorded drums or virtuals plug-ins? You are keeping the bass very low, if sometimes any..? It's in good balance anyway.. Also very nice guitar rhythm and tone, is this Angle-Server in Axe fx?
  21. GuitarLife

    Basic setup for Logic Pro X

    Do you see the audio signal in logic (audio trace), if you record something? To me it seems to be an output-select problem from logic, to you monitor channel. What have you selected in: preferences > Audio > "I/O Assignments" -page?
  22. GuitarLife

    What studio monitors are you using

    I have Adam A77x and see (hear) it as a clear improvement to sound and mixing..
  23. GuitarLife

    FC-12 Bank Up Bank Down Question

    Yeah, it's working very fine here with "preset inc/dec", but I did before have a problem, that it jumped 20 steps anyway in the preset, when I had the inc/dec set to +1/-1. I found out that I had to turn the "PC Mapping" of: Push setup button on Axe fx > go to "Midi remote" push inter and in...
  24. GuitarLife

    PowerAmp and Cab to FRFR

    I guess you'll have to split the signal up in to out1 and out2 (or out3 or 4), as one will you listen to with your 4x12 cab, the other will go to a IR cab blok from Axe library. You will want to record the last one. Maybe first tjek the IR in headphones. If you want your sound from your physical...
  25. GuitarLife

    EV-1 Calibration not quite there...

    Do you use exp. Pedal with FC 6 /12? Or do you use it with axe fx pedal input? It is calibrated after were it is connected. Edit: Oh I see it´s FC 6 be aware its calibrated another place than ”pedals”.
  26. GuitarLife

    Axe-Fx III 16.00 Beta 11 "Cygnus" Firmware - Public Beta #8

    Ah, thank you my friends, you're right.. My Apollo console did show 44kHz. It normally sets on 48 kHz.. I's corrected now..
  27. GuitarLife

    Axe-Fx III 16.00 Beta 11 "Cygnus" Firmware - Public Beta #8

    Im using S/PDIF, yes..? It's the cause to this problem..? Thanx..
  28. GuitarLife

    Axe-Fx III 16.00 Beta 11 "Cygnus" Firmware - Public Beta #8

    Any of you who also have problems with the Tuner..? After firmware beta 11 i shows about one whole step to high (E is almost F#). I did refresh Axe edit some times.. I check tones with keyboard and other guitars?
  29. GuitarLife

    New Member and yes I'm sorry, another S/PDIF Apollo question (SOLVED)

    I think it's a UAD support question, if the problem consist? It can be something about "new protocol" for SPDIF with optical, do not match Axe fx SPDIF, but I really don't know. https://help.uaudio.com/hc/en-us/articles/210253543-Contact-Support Or some specialists on UAD forum can maybe...
  30. GuitarLife

    New Member and yes I'm sorry, another S/PDIF Apollo question (SOLVED)

    Will this help..: https://media.uaudio.com/support/manuals/hardware/Apollo%20x8p%20Hardware%20Manual.pdf From start page 25 to mid page 27?
  31. GuitarLife

    New Member and yes I'm sorry, another S/PDIF Apollo question (SOLVED)

    As I understand it, you want to go from Apollo Hi-Z input to Axe fx digital input (SPDIF)? I just did that on first channel in my Apollo sound card interface, through Hi-Z input. Axe fx received the signal to the input and playing my signal chain (rig, amp block and effects etc) I have one...
  32. GuitarLife

    Sudden latency with Axe-Fx 3 and Logic Pro X

    No problemo.. glad to help.. Don't overlook the gate function in input block, this can remove a lot of noise, if you have a good load of drive and distortion.
  33. GuitarLife

    Sudden latency with Axe-Fx 3 and Logic Pro X

    You have to listen to your direct monitor from Axe fx only, in some way. Now you're probably only listen to your recorded source or maybe together with direct monitor, You hear it first when its recorded (and/or processed). This is an ocean of latency.. A better way is to connect your Axe fx to...
  34. GuitarLife

    What's the Blinking Red Light Under the Fan Mount on the Motherboard of my Axe III MkII?

    It's Cliff calling, asking what guitar we're playing, if we're making to ugly tones. You can speak into the guitar pickup..
  35. GuitarLife

    How do you record your Axe-Fx?

    I also use apollo firewire Silverface 16/18 in/out, though Apollo have thunderbolt as well, but my Imac can't (yet). I have connected SPDIF I/O + out 1 and out 2 from Axe Fx to apollo and USB for Axe edit. I also use Behringer ADAT preamp 8 I/O (not expensive) connected via Apollo "Cue...
  36. GuitarLife

    Wish Matching cab suggestion

    Or maybe in cab block, there could be a roll down menu, with all the possible amps in Axe fx, so it could suggest a cobble (5-20) of factory IR, for this particular amp you select. Seems to be some kind of mapping.. In use that function, only the suggested cabs, will be visible. Of course its...
  37. GuitarLife

    Wish Standard Cab block associated with Amp block, or auto Cab matching

    Oh, it's FM wish list, I didn't see that.. I followed a link..
  38. GuitarLife

    Axe-Fx III Firmware Release Version 15.01

    The depth knob is working good in band-commander ideal mode, as it is lacking some bottom to my ears.
  39. GuitarLife

    Axe-Fx III Firmware Release Version 15.01

    Sorry for the change of subject, but is high cut in Suhr Badger 18 and Suhr Badger 30 suppose to do nothing..?
  40. GuitarLife

    Powered cab users: What are you using?

    I use Yamaha DXR12 in FRFR mode, they go a little deep, so I need often to cut a little in the low end. But excellent sound..
  41. GuitarLife

    Studio Monitor Recommendations

    I got my Adam A77X here some days ago, 250 W each, 3- ways. It can however cut the volume to half the power on front panel. I'm still kind of testing and correcting some music in my DAW creations from the old one. Until now I think they are fantastic, really tight deep bottom and powerful...
  42. GuitarLife

    Announcing Axe-Fx III Mark II

    I will, for now, choose to see it as just an Axe Fx 3 with a bigger flash stomach, more hungry for data.. All the modelling quality is just the same and will always be..
  43. GuitarLife

    Using a direct out for reamping using Logic and Apollo?

    Yes ofcourse I do, wow.. thanks for information.. I have the exact same audio interface and have connected my Axe fx wih Spdif to Apollo..
  44. GuitarLife

    Using a direct out for reamping using Logic and Apollo?

    I hear or see no sound from the settings of "spdif out source, input 1" to the Axe fx rig, when I play back the DI signal? I did the two tracks as you mention 1 spdif in/out and - 2 analog in/out.. I have connected the Axe fx output 1 and 2 analog with my apollo as well. Should the Spdif cable...
  45. GuitarLife

    Using a direct out for reamping using Logic and Apollo?

    How do you set the in/out in your DAW, to actually do the reamp..?
  46. GuitarLife

    Axe-Fx III Firmware Release Version 13.00 Public Beta

    Have you tried Suhr amp, both 18 w & 30 w, with a Suhr riot LED drive in front (no distortion), amps with input drive around 5-6 and master something higher, to taste? A good delay and nice reverb.. I have cab #757, #760 and #758 on Suhr 30 w and #34 and #52 on Suhr 18 w, but I'm sure you have...
  47. GuitarLife

    Axe-Fx III Firmware Release Version 13.00 Public Beta

    Thank you Cliff and the FAS team, I really like this update a lot. Many helpful exciting changes in the drive block, it is clearly an immense improvement, to my experience and ear.. It will take some time to explore it all, but for what I have heard, it's just kick-ass..
  48. GuitarLife

    Re-amping without USB, just using DAW, ext. soundcard and Axe Fx 3, to keep 44,1 kHz

    But aggregate device will demand I use 48 kHZ, wouldn't it ..? Or is this acceptable ..? DAW (and sound card) 44.1 kHz and Axe Fx 48 kHz.
  49. GuitarLife

    Re-amping without USB, just using DAW, ext. soundcard and Axe Fx 3, to keep 44,1 kHz

    Ok, but I'm on it very fine to record the dry signal from USB, but how do I send dry signal back to Axe fx, to re-amp and do live re-amp? I'm aware to use USB in -block, but how do I have Axe fx to listen to dry signal from track recorded. I have only set my DAW input to record from Axe fx...
  50. GuitarLife

    Re-amping without USB, just using DAW, ext. soundcard and Axe Fx 3, to keep 44,1 kHz

    Hi thanks .. This is good to hear.. Could you explain a little more how you do this? I'm on Mac and using Logic X.. That would be great..!
  51. GuitarLife

    Re-amping without USB, just using DAW, ext. soundcard and Axe Fx 3, to keep 44,1 kHz

    Have some of you had some luck to re-amp without USB, but instead through ext. sound card? Just using DAW and Axe Fx 3, to send the signal in and out of DAW to Axe FX for live re-amping and back again on a new track? Of course with help from external sound card, multi In/out. This is to avoid my...
  52. GuitarLife

    How do you make this thick heavey (tight) djent sound in DAW with Axe-Fx 3 in your music?

    Thank you very much Lohengrin! , I will look at this with interest. You do not mention down tuning? Is this not important for the djent sound, as I believe?
  53. GuitarLife

    How do you make this thick heavey (tight) djent sound in DAW with Axe-Fx 3 in your music?

    I am not heavily experienced in this genre, however in some passage of my idea in music, it would be a exiting kick in my music to have some djent sounding passage. It is some kind of experimental rock - heavy-and metal, with lots of wird synth landscape/grooves) . It seems to me, that also the...
  54. GuitarLife

    Axe-Fx III Firmware Release Version 12.09

    Thanks this is just fine, no problem, I'll look forward to this.
  55. GuitarLife

    Axe-Fx III Firmware Release Version 12.09

    Ok, it's this.. I have turned "out compression" a little up so it was more present.
  56. GuitarLife

    Axe-Fx III Firmware Release Version 12.09

    Yes I am running two amp blocks. But only one at the time, not two at ones. One is muted and also muted when bypassed.
  57. GuitarLife

    Axe-Fx III Firmware Release Version 12.09

    I experience unfortunately in this update 12.09, that some Amp is cracking and popping in some few specific high gain amps when I turn on the "out compression" in dynamics page in amp block? This is for me the Friedman BE V1, and the Friedman HBE and Friedman HBE V2 and the Friedman BE.. Maybe...
  58. GuitarLife

    Wish More different colors for filtering in the cab banks (mainly), would be a help

    With over 2200 cabs in the cabs bank, it would (for me) be a very big help to have more colors for filtering, so you can give all the different types of Cabinets an specific color. Like all "Marshalls"/Brit or Rectifier, 5153 -cabs could be given a color each. I think there is about 30-40 types...
  59. GuitarLife

    Now full member of the Axe Fx 3 family

    Got my Axe Fx 3 two days ago, exactly wednesday, sent from G66 in Germany. I'm coming from Axe Fx 2 XL + - and had the feel I just had to switch, couldn't help it. Sold my Axe 2 and MFC 101 for about half of the price and I could then purchase just Axe Fx 3 for about 1/3 of the price...
  60. GuitarLife

    Can the Axe-Fx III play clean or is it only for metal ...

    Really nice clean and break up.. I'll first have my new Axe Fx 3 tomorrow afternoon. Do I look forward..?
  61. GuitarLife

    Axe-Fx into UA Apollo Twin=Mind Blown

    I would rather use UA 1176 compression/limiter plugin in the mixer console, than UA 610b. I think there is enough EQ possibilities in Axe fx to put EQ on the console, but for the fun (or exactly control) I would put a Neve 1073. Cheers.
  62. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    Hi positive news!! When I was going to pack the MFC 101 mark 3 for G66-support in Germany, in the box provided and just wanted to clean it, It happened to see that the bolt on button # 1 was loose?!! And I tried to tighten it as best I could. After it was clamped and tighten the best i could ...
  63. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    It is now continue to do this strange error.. It is stocked at these "FW Update mode" and will not operate normal now. I did try to update the firmware for MFC 101 Mark 3, and it did the update, but just still stocked at "FW Update mode" again, after reboot Axe Fx 2 xl+? It did this 2 or maybe...
  64. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    Hi unix-guy. Now it works again in miraculous way..?! But I had to do some sweat about it.. Powered Axe Fx up some times with the #1 footswitch hold down and it seams nothing happened. I did tjeck the cable was set right and also took the midi out from Axe fx out of the computer. Then I just...
  65. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    Thanks so much. I’ll look at this function when I get home.. Im at work now until late evening. Sounds like the first button has been stocked?
  66. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    Hi unix-guy Thanks.. What do you mean by "sociocultural specific button"..? This sounds strange. Is it a button on Axe 2 xl+ or at the MFC 101? Can you point out what exactly button you mean? The cable is the the XLR -kind of cable, that followed the MFC 101 from fabric, and have been used...
  67. GuitarLife

    My MFC Mark 3, has going dead, just displaying "FW Update mode" and nothing else.

    Hi there hope you please can help me.. My MFC Mark 3 foot controller, has going dead, as it not light up anything, but only the display saying "FW Update mode". This just happened when I tuned on the Axe Fx 2 xl+ today? I did turn off and on Axe FX 2 some times, but didn't help at all. Its...
  68. GuitarLife

    Axe-Fx II "Ares" Rev 2.00 Firmware Release

    It's f`..king unbelievable, Thanks to FAS (Cliff) !! Ares 2.0 sounds even more like tubes to my ear, it's rolling and rolling and very tight. And it seems for me the characteristic difference of all the mod. amp types is a lot more easy to hear. (my first impression) (Of course in the seperat...
  69. GuitarLife

    Wireless?

    I have Line 6, Relay G10.. Seams to work just fine. The channel setting is automated, where it is setting the best channel, by itself.. I have try to go back and hear cable again, for a short test, but think now wireless sounds more clear and just better..
  70. GuitarLife

    Red clip light goes on all the time

    Can you tell us what audio interface you are using? Maybe post pictures of the model or your own and be sure you show the input and output connection?
  71. GuitarLife

    Only Mesa Boogie rig in Axe Fx 2

    If some of you guys should build a rig, with 4 or 5 scenes, just only consisting of Mesa Boogie amps, from clean > break up > rock rhythm/crunch > soloing > heavy/ metal. Which selection of amp would you choose..? Using two amp block of course and x/y (4 amps). Every Mesa Boogie amp in Axe Fx...
  72. GuitarLife

    Not a Bug Ares 1.03 Delay mix

    Which is exactly what we want to do, just much much harder. IMO The overall problem is that "level" in delay block turns down all signal, it should naturally only turn down the delay signal. It would be a kind of "master mix". Yes sure maybe this can be used instead, but you do need some...
  73. GuitarLife

    Not a Bug Ares 1.03 Delay mix

    If you use dual anyway, you can turn down "Level right" to zero and set "pan left" to middle or zero and then turn down "level left" to maybe under 50%, it will then be mono and a very low level delay. You can also use "Ducker Atten" in Tone/Duck -page, to cut away some of the first delays from...
  74. GuitarLife

    How are they getting THAT sound ??

    What are you listening to when you going direct? Just your Studio monitors? This can be a problem.. Rather listening to a pair of (or one) FRFR powered quality scene monitor speakers or simply small powered PA - speakers FRFR, when you record. And mute the direct signal. The issue here is the...
  75. GuitarLife

    How are they getting THAT sound ??

    Oh, by the way to evh_slash, be assure that IF you're using two amps in a preset, but one at the time in the scenes, to mute "all the amps" in bypass mode, so those you're not using are perfect quiet. Also if you have x/y amps so you have four amps, it can tease as hell. They can bleed with an...
  76. GuitarLife

    How are they getting THAT sound ??

    Well I don't know the reason, but to me there is a big difference in quality. Maybe the quality is a little different (maybe newer), when they sell seperat? Better chance to sell them, I guess..
  77. GuitarLife

    How are they getting THAT sound ??

    The stock cabs IR have never been my main use. I have, almost from the beginning, always used 3. parties IR (OwnHammer, Marshall IR). It will take a big step forward to use 3. parties IR..
  78. GuitarLife

    Not a Bug Ares 1.03 Delay mix

    Instead of "ping pong" delay maybe use "dual"..? It's technical the same effect and do/sound the same. Then you can turn down the "level left" and "level right" in "Time/FB" window.. The mix button will then be different..
  79. GuitarLife

    Not a Bug Ares 1.03 Delay mix

    I think I always had the issue with the delay mix (from about the quantum 9), that it was hard to set it low enough. But now I adjust it with input gain in the delay block, as this only turn down the signal to the delay, not the over all level. Then the mix knop is more easy to set.. Maybe...
  80. GuitarLife

    Presets

    Or the other way around, there are to much top dominating your sound? I have also these issues in some amps particular marshals, and some rhythm sections of high gain amp (blue edition). I fix it with GEQ in amp block and this works very fine. Try to set the default GEQ in ampblock in the 8k...
  81. GuitarLife

    Melodic lead tone

    Maybe an AC-20..? There is 4 different types, also with 2 preamp tube structure, They are kind of British clean an break up soft to medium and all have high cut in front panel. Great for fender strat. clean.. Lots of possibilities..
  82. GuitarLife

    Activating external foot switch with two different buttons?

    Yeah, I know that would be logic, but I did try to use the switch (1+2) input for some times ago, but it didn't work. Thou it worked limited anyway in Expression input.. In Ex switch input, you have to do some programming of MFC 101 (and Axe fx2xl+), to make it work. I'll have to point at the...
  83. GuitarLife

    Activating external foot switch with two different buttons?

    Ok, I found out the trick, thanx.. But not easy..o_O
  84. GuitarLife

    Activating external foot switch with two different buttons?

    Hi there folks I have an external foot switch i Use as extra switch together with MFC 101 and go in expression pedals "2", as my Expression pedal goes in "1". The external foot switch is a Ibanez with two buttons, I have used before for an Tweed Combo amp for switch channel and spring verb and...
Back
Top Bottom