Search results for query: *

  1. Rocketsurgeongeneral

    Something strange happens when I use my Axe Fx II XL+ as a post FX processor.

    I don't think my global EQ is on, but I'm not sure if I was correct by pressing the utility button on the Axe Fx II. What looked like a graphic EQ had everything set to 0.
  2. Rocketsurgeongeneral

    Something strange happens when I use my Axe Fx II XL+ as a post FX processor.

    It's hard to explain and I did try recording it but oddly enough, when I recorded it, the playback didn't catch the effect.
  3. Rocketsurgeongeneral

    Something strange happens when I use my Axe Fx II XL+ as a post FX processor.

    I noticed when I run my Axe Fx II as a post FX processor through my Peavey Invective MH, the guitar tone is affected by the Axe Fx II simply being powered on. I've toggled the FX loop on the Invective and still could hear the Axe Fx II giving a more digital effect. Has anyone else had this...
  4. Rocketsurgeongeneral

    Trying to run my Axe Fx II as a Post FX Processor only

    Greetings everyone. I recently sold my Axe Fx III and am back to using the Axe Fx II. I was primarily using the III as a Post FX processor like it shows in page 29 of its respected manual. Since I'm trying to do the same thing but with the Axe Fx II I followed pg. 23 of the Axe Fx II manual. The...
  5. Rocketsurgeongeneral

    Recording a wet & dry signal at the same time

    I have the Axe Fx II XL+ plugged in via SPDIF to my Scarlett 18i8. I use the Scarlett 18i8 Focusrite Center Software to setup the SPDIF audio connections. It's important to make the Axe Fx the slave especially if you want to run synthesizers via MIDI and have everything synced up to the DAW...
  6. Rocketsurgeongeneral

    Recording a wet & dry signal at the same time

    Thanks for screenshotting this!
  7. Rocketsurgeongeneral

    Recording a wet & dry signal at the same time

    So you're just using the Axe Fx III as your main interface?
  8. Rocketsurgeongeneral

    Why does the delay at 110bpm 1/4 545ms groove so well at 84bpm?

    I've tried using this tempo calculator to understand why but I can't wrap my head around it. http://www.sengpielaudio.com/calculator-bpmtempotime.htm
  9. Rocketsurgeongeneral

    Being able to choose 4 amps in one channel is such hack

    I am only doing 4x for now. I categorize all my presets by bpm, amp, delay.
  10. Rocketsurgeongeneral

    Being able to choose 4 amps in one channel is such hack

    I am in full appreciation of the Axe Fx III's ability to switch between 4 channels for every block. Messing with amp blocks and delay blocks got 10,000,000,000x easier.
  11. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    What a coincidence. I used to rock with one of those as well and originally got the fcb1010 and eprom for that purpose. When I got the Axe Fx II XL+ it was at the same time that the Axe Fx III was coming out at $2500 which I bought at the same time because I was so enamored with Fractal Audio...
  12. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    I try to cycle through the presets in Pr mode but my Axe Fx II XL+ does not "obey" the fcb1010 eprom chip. Have you encountered this problem before and do you have a solution? I have the MIDI IN of the fcb1010 plugged into the MIDI out of Axe Fx II XL+ and the MID OUT/THRU of the fcb1010 plugged...
  13. Rocketsurgeongeneral

    Axe-Fx 2 XL+ and Eureka Prom 3.2

    I try to cycle through the presets in Pr mode but my Axe Fx II XL+ does not "obey" the fcb1010 eprom chip. Have you encountered this problem before and do you have a solution? I have the MIDI IN of the fcb1010 plugged into the MIDI out of Axe Fx II XL+ and the MID OUT/THRU of the fcb1010 plugged...
  14. Rocketsurgeongeneral

    Axe-Fx 2 XL+ and Eureka Prom 3.2

    I got as far as 12:44 before having to stop and ask a question. I scroll to the MIDI page just like you but my menu options are different: MIDI CHANNEL: 3 MFC PORT: DISABLED/FASLINK/ETHERCON MFC ECHO TO MIDI OUT: ON PROG CHANGE: ON MAPPING MODE: NONE MAP FROM PRESET: 0 MAP TO PRESET: 0 MAP TO...
  15. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    I got as far as 12:44 before having to stop and ask a question. I scroll to the MIDI page just like you but my menu options are different: MIDI CHANNEL: 3 MFC PORT: DISABLED/FASLINK/ETHERCON MFC ECHO TO MIDI OUT: ON PROG CHANGE: ON MAPPING MODE: NONE MAP FROM PRESET: 0 MAP TO PRESET: 0...
  16. Rocketsurgeongeneral

    100bpm1/4 = 150bpm1/4dot = 600ms

    The calculator doesn't factor in 1/4dot. EDIT: The interface could use some updating but this is a pretty sweet piece of info.
  17. Rocketsurgeongeneral

    100bpm1/4 = 150bpm1/4dot = 600ms

    I just wanted to share this little tid bit in case anyone stumbled upon that groove but found it difficult to record with the DAW metronome.
  18. Rocketsurgeongeneral

    I wanted to mimic/recreate something I experienced

    I was walking at my local community college campus and when no one was around I started shouting to see what kind of delays and reverbs I was working with. To my pleasant surprise, I noticed something that low key fascinated me. The louder I shouted, the more the delays would repeat. The softer...
  19. Rocketsurgeongeneral

    Can I keep two units connected simultaneously?

    I've got a scarlett 18i8 and the axe fx ii xl+ and axe fx iii. I was wondering if I could use the spdif i/o to connect both units at the same time so that i could switch between units while recording. I would imagine that one spdif cable for each unit. Has anyone done this?
  20. Rocketsurgeongeneral

    Can the Axe FX mimic what the eventide quadrovox does?

    Ever since the Neural DSP Archetype: Tim Henson came out I know that fans are loving the multi voice feature the plugin has. I've heard that the Eventide Quadrovox does the same thing, and I'm wondering if the Axe FX II has the ability to mimic what these plugins do. I'm pretty sure the answer...
  21. Rocketsurgeongeneral

    How do I backup my Axe Fx II XL+?

    I'm not willing to try it yet just because I have everything wired the way that I like it.
  22. Rocketsurgeongeneral

    How do I backup my Axe Fx II XL+?

    I tried using fractal-bot to do the back up but I get timed out and it never goes past bank a. I tried doing each bank at a time, but would timeout after bank a. How come Axe Edit II when editing blocks by using blocks library the edit page disappears momentarily amd I have to click somewhere...
  23. Rocketsurgeongeneral

    Is there a way to automate tempo changes on the Axe Fx III?

    I'm trying to get my delay block to go from 100 to 90 to 80bpm while all still being a 1/4 note delay.
  24. Rocketsurgeongeneral

    Using my Axe Fx II XL+ with my Peavey Invective MH

    I figured out what it was. As it turns out I needed to mute the SPDIF inputs on my Scarlett 18i8.
  25. Rocketsurgeongeneral

    Using my Axe Fx II XL+ with my Peavey Invective MH

    Thanks for reading, I've got a slight inconvenience. I started using my Axe Fx II XL+ as an effects processor, plugging up the FX Loop from the Axe Fx II XL+ to the Invective MH FX loop. When I run the clean channel with the Axe Fx II XL+ everything sounds beautiful and I love it. However, when...
  26. Rocketsurgeongeneral

    Trying to copy the clean intro to Periphery Psychosphere but having issues with getting the delay just right.

    you here it better on the 21 second mark, but not in the meinl live session.
  27. Rocketsurgeongeneral

    Been using a Moog Mother 32 with my Axe Fx III

    It is my understanding that the Moog Mother 32 synth has a MIDI input that when connected to an external clock will switch up the tempo/gate length knob into subdivisions of whatever external clock is plugged into the Mother-32. Can I use the MIDI I/O of the Axe Fx III to make it so? How is it...
  28. Rocketsurgeongeneral

    Master Volume VS. Master Volume Trim

    It's become standard for me to set the master volume on all amps to 10.
  29. Rocketsurgeongeneral

    Master Volume VS. Master Volume Trim

    I'm using the Vibra-King amp block.
  30. Rocketsurgeongeneral

    Master Volume VS. Master Volume Trim

    so the master volume trim is a gain knob?
  31. Rocketsurgeongeneral

    Master Volume VS. Master Volume Trim

    What's the difference? What does trimming the volume do? Isn't that just like lowering it?
  32. Rocketsurgeongeneral

    I don't really understand the delay tempos past 1 Trip.

    Can anyone explain these bizarre, time signatures?
  33. Rocketsurgeongeneral

    Axe Fx III Vs. FM3

    What kind of limitations does the FM3 have that the Axe Fx III doesn't in terms of making presets?
  34. Rocketsurgeongeneral

    150bpm+1/4 note delay=100bpm+1/4tripletdelay=400ms. Is there a formula for this?

    if you have it at 100bpm with 1/4 triplet it will have the same groove as 150bpm with 1/4 note.
  35. Rocketsurgeongeneral

    150bpm+1/4 note delay=100bpm+1/4tripletdelay=400ms. Is there a formula for this?

    150bpm with a 1/4 note delay=400ms 100bpm with a 1/4 note triplet delay=400ms I had this neat groove that I tried recording at 100bpm in cubase but the cubase metronome was not in sync with the axe fx. Come to find out that if I changed the tempo to 150bpm and switched the delay timing to 1/4...
  36. Rocketsurgeongeneral

    150bpm+1/4 note delay=100bpm+1/4tripletdelay=400ms. Is there a formula for this?

    150bpm+1/4 note delay=100bpm+1/4tripletdelay=400ms. Someone please help me understand this.
  37. Rocketsurgeongeneral

    not entirely sure what i did here or how to utilize it

    I was messing with the controller "block" on axe edit and thought that maybe this would do something but i'm not hearing a difference.
  38. Rocketsurgeongeneral

    I've got some ground hum in this preset and want to eliminate it without using the gate/expander block.

    my mismatch parameter was at 0.000, gonna hold off on soft/hard resetting it because i do like how it sounds.
  39. Rocketsurgeongeneral

    I've got some ground hum in this preset and want to eliminate it without using the gate/expander block.

    i was but i think i'll ditch that idea if its gets rid of the hum.
  40. Rocketsurgeongeneral

    I've got some ground hum in this preset and want to eliminate it without using the gate/expander block.

    Is there a way to do this, the gate affects the way the delays roll
  41. Rocketsurgeongeneral

    How many different tempos can you save in one preset?

    This is lit! Thanks for showing me the way!
  42. Rocketsurgeongeneral

    How many different tempos can you save in one preset?

    i don't see a block called controllers.
  43. Rocketsurgeongeneral

    How many different tempos can you save in one preset?

    i found that i can set two different tempos with one preset when it comes to use axe edit iii. to add a third one is a process.
  44. Rocketsurgeongeneral

    how do i get the overtones of a delay to really pop out?

    you should know that it's a slight tweak to your lush digital sim block. I kept everything the same put increased gain 2 to 1.10 in the eq section of the delay to get the result i was hoping for!
  45. Rocketsurgeongeneral

    how do i get the overtones of a delay to really pop out?

    this got me pretty chugging close to the result i was looking for
  46. Rocketsurgeongeneral

    how do i get the overtones of a delay to really pop out?

    downward expander? I have one in front of the amp block but i'm using it as a gate.
  47. Rocketsurgeongeneral

    how do i get the overtones of a delay to really pop out?

    I got this preset here and when i play, i hear some suttle overtones of the delays making this unique harmony. I want to make the "wash" of it pop. scene 3.
  48. Rocketsurgeongeneral

    Emulating the meris ottobit + data corrupter

    thank you, you just saved me the hassle of trying to buy the pedals.
  49. Rocketsurgeongeneral

    Emulating the meris ottobit + data corrupter

    Has anyone ever tried to copy these pedals? can it be achieved?
  50. Rocketsurgeongeneral

    Anyone have the STL Tones Will Putney Axe Fx III pack?

    The amps that you can't find on there such as the MRT15 and the Victory Kraken, are they profiled or reversed sound engineered in some way?
  51. Rocketsurgeongeneral

    I get popping in my lead channel. What's up with that?

    I tried switching IRs and that didn't help.
  52. Rocketsurgeongeneral

    Anyone have the STL Tones Will Putney Axe Fx III pack?

    I was wondering if it's worth the $80 seeing as the info sheet claims to model some amps which aren't standard in the Axe Fx III.
  53. Rocketsurgeongeneral

    AFIII Axe-Fx III Violin

    Any chance of you posting the II patch? I'm specifically wanting a cello sound.
  54. Rocketsurgeongeneral

    I want to make my guitar sound like a cello.

    How do I accomplish this?
  55. Rocketsurgeongeneral

    How do I "side-chain" reverb on the Axe Fx III?

    Totally thought of this after I asked the question.
  56. Rocketsurgeongeneral

    How do I "side-chain" reverb on the Axe Fx III?

    I see Threshold, Attenuation, Release Time knobs. Which one does what and how do I achieve my goal?
  57. Rocketsurgeongeneral

    How do I "side-chain" reverb on the Axe Fx III?

    What I'm trying to do is have the reverb not affect the signal while I'm playing but once I stop playing I get the reverb effect. Kinda like in this video:
  58. Rocketsurgeongeneral

    Solo 100 Clean VS. Shiver Clean VS. USA Clean VS. Bludojai Clean

    When you say MV do you mean master volume? and when you say preamp turned down are you referring to the preamp bias knob? preamp hardness?
  59. Rocketsurgeongeneral

    Solo 100 Clean VS. Shiver Clean VS. USA Clean VS. Bludojai Clean

    Which amps are better and for what reasons, and which one is your favorite?
  60. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    The reason why I started using it was because I didn't want my Axe Fx III to have to process drum samples when I track. I got the the 118i8 so I could also record DI and use plug ins that I found in Cubase and attempt to reverse engineer them to the Axe Fx III.
  61. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    What does it matter which one is slave and master? Probably not, but it definitely brought some new light to the way I had everything running. Had it not been for this issue I would've never have started to get a grasp on the master and slave relationship between interfaces and modelers. Which...
  62. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    Not only did it solve my problem but the quality of my sound increased. I can hear the multi tap delay much better now!
  63. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    I have the clock source set as SPDIF with a sample rate of 44.1 kHz on my Scarlett 18i8. I'm not sure how I can distinguish the master/slave connection from the Axe Fx III and the Scarlett 18i8.
  64. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    I'm almost certain that this is exclusively a SPDIF issue with the Axe Fx III isolated to the firmware update because: I tried using 1/4in. cables on the Axe Fx III and it did not cut out. I did have to switch the word clock from SPDIF/AES IN to INTERNAL. Prior to the update everything was...
  65. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    I tried plugging in the Axe Fx III via output 1 with quarter inch cables and got a hissing sound. switched the word clock to internal and the hissing sound went away.
  66. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    I switched from over to the Axe Fx II XL+ and haven't gotten any dropouts.
  67. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    The input and output meters still light up when the sound drops. It's connected via SPDIF so a Scarlett 18i8.
  68. Rocketsurgeongeneral

    Anyone have issues with the sound on there Axe-Fx III cutting out?

    I updated to latest firmware a couple days back and was jamming on different presets to make sure that it wasn't that. Any solutions?
  69. Rocketsurgeongeneral

    I can't figure out why the scenes on this preset have different loudness

    Thanks for seeing that. I wouldn't have figured it out.
  70. Rocketsurgeongeneral

    Tape Delay & Looper Fun

    FYI: You're going to need Firmware 12.00 in order to get this patch. I wasn't going to update but this made me want to.
  71. Rocketsurgeongeneral

    Best metal presets free or paid

    You can have one of mine.
  72. Rocketsurgeongeneral

    I can't figure out why the scenes on this preset have different loudness

    It's the same settings except for the delays are timed differently.
  73. Rocketsurgeongeneral

    Has anyone here tried to copy the sounds of Thrice - Vheissu?

    My two favorite songs off that album are Atlantic and Dust Of Nations.
  74. Rocketsurgeongeneral

    Help Axe Fx III doesn't make any sound and everytime I turn it on, the edited light is on.

    You can confirm that it's from the Firmware update though? Did the Firmware update edit all of the original presets in some way?
  75. Rocketsurgeongeneral

    Help Axe Fx III doesn't make any sound and everytime I turn it on, the edited light is on.

    It was Focusrite Control Center. Axe Fx III is working fine, but now I have this thing where if I scroll through every preset the EDITED light is on. I haven't even touched it. I just updated to 11.01 to see if that would fix it, but no..
  76. Rocketsurgeongeneral

    Help Axe Fx III doesn't make any sound and everytime I turn it on, the edited light is on.

    Something's gone terribly wrong. I have my Axe Fx III connected via SPDIF to my Scarlett 18i8. That's how I typically run things and my it's been working just fine but now I don't have any sound and I have no idea why.
  77. Rocketsurgeongeneral

    Trying to get the taps in the Megatap Delay to really stick out without clipping.

    Cool, I'm there. I solved the clipping but now it's getting the taps to stand out.
  78. Rocketsurgeongeneral

    Trying to get the taps in the Megatap Delay to really stick out without clipping.

    I'm searching the manual on how to look up the VU meters.
  79. Rocketsurgeongeneral

    Trying to get the taps in the Megatap Delay to really stick out without clipping.

    I got this preset that I made from using the event horizon patch. I modified it to make it but am having difficulty with making the taps on the megatap delay really pop. Please help.
Back
Top Bottom