Search results for query: *

  1. Moeed Kazi

    Axe FX 3 Headphones output

    Thanks @J.C
  2. Moeed Kazi

    Axe FX 3 Headphones output

    Thanks @Repartee41 appreciate your help. I understand now by all the responses I received above. No limitations as from a higher impedance perspective, AF3 can drive a 250 ohms headphones without any issues. :)
  3. Moeed Kazi

    Axe FX 3 Headphones output

    Thanks @toro484 and @Mark-B :) appreciate you taking out time and responding to the post :)
  4. Moeed Kazi

    Axe FX 3 Headphones output

    Thanks for your kind response, yes it does matter, but I need to first derive to a conclusion between the 3 output levels (25,80 or 250) vs what can best match AXEFX3 headphones output, later on I dwell deeper in the aspects of speaker sensitivity. Can AF3 drive a 250 ohms headphone without any...
  5. Moeed Kazi

    Axe FX 3 Headphones output

    Hello There, I am looking for the best experience headphones to be paired with AF3. Just have a quick question, can the AF3 headphone output handle a high impedance headphone like the Beyerdynamic 250 ohms? or should i go for a lower impedance headphone like 25 ohm or 80 ohm? Please recommend...
  6. Moeed Kazi

    Axe-Fx III Firmware Release Version 14.04

    Absolutely 💯 %
  7. Moeed Kazi

    Axe-Fx III Firmware Release Version 14.04

    Yea not a mandate at all, and Cliff should definitely have sometime off. Just that we all are so spoiled by the awesome firmwares.....
  8. Moeed Kazi

    Axe-Fx III Firmware Release Version 14.04

    Yeah, this silence on the new firmware is creating Anxiety.... what's cooking in 14.5? I hope as usual a delicacy.
  9. Moeed Kazi

    Wish Wish List: New Amps

    Super... Thanks to you and Cliff.
  10. Moeed Kazi

    Wish Wish List: New Amps

    Ah....Are you aware what exactly is the difference and how can that be compensated?
  11. Moeed Kazi

    Wish Wish List: New Amps

    Ok.... 😀 Thanks for the clarification Cliff and drarren. Appreciate your responses.
  12. Moeed Kazi

    Wish Wish List: New Amps

    Hence the request.... :D
  13. Moeed Kazi

    Wish Wish List: New Amps

    Mesa Boogie Mark V please...... :)
  14. Moeed Kazi

    Impedance curve in amp section?

    Hello Austin, Just to update, the 1x12 V30 sounds relatively close and opens up to nice harmonics. Thanks for the guidance. I appreciate it very much.
  15. Moeed Kazi

    Impedance curve in amp section?

    Thanks Austin, will check and let you know. BTW your IRs are simply impeccable 👌.
  16. Moeed Kazi

    What is up with Fractal, and supply? New Customer

    Yea exactly, Cliff had also announced during the Axe fx3 about the delay that the shipment from China was delayed due to unavailability of critical components, so Fractal surely has been more transparent than any other companies... the wait was absolutely worthwhile... Enjoying the FC 12 so much.
  17. Moeed Kazi

    What is up with Fractal, and supply? New Customer

    Hi There, totally understand the frustration you are in, a year and half back I was also in the same boat. Initially for Axf3 and then for FC12... had fx3 for a long time without the switch controller. The wait sometimes takes over..... But believe me, Fractal does what ever they can to...
  18. Moeed Kazi

    Impedance curve in amp section?

    Hello Everyone, Which is the best impedance curve to select for a Carvin Legacy amp block? the default is pointing towards 4x12 USA lead, where as the suited IRs are all 2x12 leggy's, so how come it is pointing to a 4x12 Mesa model? Anyone has any more information? As far as I remember the imp...
  19. Moeed Kazi

    TC MIMIQ?

    Thanks Cooper, your contribution to Fractal and music man is amazing..., hope you know that ....:)
  20. Moeed Kazi

    TC MIMIQ?

    Hi, may I have the link of the podcast you are talking about... i tried to find it on you tube both on Coopers and Dougs channel but couldn't find it.
  21. Moeed Kazi

    Axe-Fx III Firmware Release Version 12.03

    Leon, mate aren't you racing against yourself, always to deliver the first..... the best. Your the shining star guiding us all.... :cool:
  22. Moeed Kazi

    Effects Grid Utilization

    Much appreciate it H C E, you ain't a veteran just like that. :)
  23. Moeed Kazi

    Effects Grid Utilization

    Thanks Yek. Appreciate help.
  24. Moeed Kazi

    Effects Grid Utilization

    Hello There, Have couple of queries. 1. How do we utilize the second row of the grid connected to the first, I have utilized all 14 blocks, now I want the 13 block to get connected to the some more effects in series before is goes to output 1...
  25. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Here's with the case. Gator GTSA 61 case.
  26. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Here's READY TO ROCK and DRIVEN. GATOR GTSA 61 Case, Fits exactly without any issues, PERFECTLY.....
  27. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Thanks a ton Leon, you know you are simply amazing....:)
  28. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Ha ha, Thanks, Great minds think alike. Keep us posted on the progress and the pics.
  29. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Sure, the width of each Aluminium hollow pipe is 2 inches. These hollow pipes are the ones that are used to hold glass, and hence have screw cavities. Made the outer frame (41inch X 16inch... this should easily fit in a Gator 61 keys keyboard case), The mid section pipes are screwed on the...
  30. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Here's Mine .... Here's Mine...
  31. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Here it is finally.... phew ;) Firing up the beast.... DIY Pedal Board (Aluminium) so that's its lighter. Thank you FRACTAL.....
  32. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Thanks Arun, that is what I guess will have to do.
  33. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Looking awesome....👍
  34. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    What about the FC12? It also have 4 rubber bumps at the corners? How do we velcro that?
  35. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Hey Chad, how did you stick your FC12 and EV1s to the pedal board? I also have the same setup. The reason I ask is as I noticed small bumps beneath the FC12 .... and 6 small grips (stands) beneath the EV1s. So the velcros wont fit.
  36. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Arun, how did you stick your FC12 and EV1s to the pedal board? I also have the same setup. The reason I ask is as I noticed small bumps beneath the FC12 .... and 6 small grips beneath the EV1s. So the velcros wont fit. Can you upload a pic?
  37. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Rao Saheb, Jhakaas.
  38. Moeed Kazi

    *FREE* Far-Field Session #2 Cab Pack

    Thanks Mate for taking out the time to explain this, I really appreciate your help. Makes more sense to me now, when I understand it well. Thanks once again.
  39. Moeed Kazi

    *FREE* Far-Field Session #2 Cab Pack

    Hey Leon, Can you do a Vdo about this topic.? That will really help some of us understand what's it all about?
  40. Moeed Kazi

    Expanding on the FC-6

    Loved it Leon, smart way of asigning parameters to the pots ..... :)
  41. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Yeah..... Patiently waiting. What about you? You got yours?
  42. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Both, Kashe ahat ani kuthe ahat? :D
  43. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Rao Saheb, Kuthe ahat tumhi? Nice setup....
  44. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    You must be good in Tap Dancing....Loved the setup.
  45. Moeed Kazi

    John Petrucci's JP2-C Settings

    Perhaps, this just grabbed my attention, so thought of highlighting.
  46. Moeed Kazi

    John Petrucci's JP2-C Settings

    This pic is a grab (screen shot) from the Crunch video itself, shows a bit different settings (esp tone controls mids and bass) for the 3 channels as compared to the above post.
  47. Moeed Kazi

    The Bogners in FW 5.05

    Aha, Thanks Marco you are kind. :)
  48. Moeed Kazi

    Update on the FC12? I got the FC6 but this FC12 seems to be a biaatch to get.

    Fred... I had my waitlist in July..... its going to be a year in 3 months from now.... think about me.... he he he:D
  49. Moeed Kazi

    The Bogners in FW 5.05

    Marco, which cabs are you using with Ecstasy Model? The Bogner ones in the library are not high res ones.....
  50. Moeed Kazi

    The Bogners in FW 5.05

    Killer Amp isn't it. Fractal has done a awesome job in replicating the nuances. What Cab are you guys using, I understand that the IR Bogner cabs are not ultra res cabs. @austinbuddy Any plans of getting Ultra res cabs for Bogner ... it's a killer amp. Please let me know which IR sounds the...
  51. Moeed Kazi

    Axe-Fx III Firmware Version 5.06

    I am sure ... it would have been hours since you guys met again....
  52. Moeed Kazi

    Axe-Fx III Firmware Version 5.06

    Cliff you are the biggest Rock star I have ever seen (though i have not seen you in person). Relentless aren't you?
  53. Moeed Kazi

    Axe-Fx III Firmware Version 5.02

    Will this work for Axe Fx3, the link states it's meant for Axe Fx2 or Ax8 quantum firmware.?
  54. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    I don't even have one till now....you have 2 ..:p.. love your setup. How and why do you need 2 FC12 ... that's 24 switches......
  55. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Yeah, I did that as well, hoping it works. I have found that the more closer you are to a WIFI router, you tend to lose signal, this is in any given mode RF1 or RF2. So the idea is to stay away from WIFI routers or use Shure jammers or wireless boosters on stage (this might unnecessarily become...
  56. Moeed Kazi

    Blind Test #1: Axe-Fx III vs. Real Amp

    You betcha.... Its rocks.... Have been digging the Bogner Ecstasy since a fortnight.... have been just loving it.... Do we have ultra res cabs for Bogner? I couldn't find any in the factory list.....
  57. Moeed Kazi

    Blind Test #1: Axe-Fx III vs. Real Amp

    Ha ha ha... was able to identify the difference ... but went the other way. Good one Jason. Thanks.
  58. Moeed Kazi

    Blind Test #1: Axe-Fx III vs. Real Amp

    Sample 1 and 2 Real amps 3, 4, 5 Axefx 3. Results ?
  59. Moeed Kazi

    Axe-Fx III Firmware Version 5.00 Beta #2

    Don't worry, Cliff's got your back... :)
  60. Moeed Kazi

    Axe-Fx III Firmware Version 5.00 Beta #2

    I am sure by now, you have enough material to make a biopic movie/documentarry of 5 hours for us.... please do consider to some show us behind the scenes....that I am sure would be super interesting.
  61. Moeed Kazi

    Axe-Fx III Firmware Version 5.00 Beta #2

    Did anyone tell you? Your a living legend.....get well soon.
  62. Moeed Kazi

    AFIII Richard Hallebeek testing my Axe-Fx III Amp Packs

    Was a treat listening and seeing you play Richard... flawless left hand movement... your playing also reminds me of Tom Quales playing ...flawless players you both are.....
  63. Moeed Kazi

    AFIII First gig with Axe-Fx III @ House of Blues Houston

    Loved it... your vocalist looks like Ozzys twin brother.... Curious ... what guitar do you use... real pointy headstock... :D
  64. Moeed Kazi

    AFIII First gig with Axe-Fx III @ House of Blues Houston

    Bark at the Moon ...solo.... was a soul crusher.... super awesome.... better than Jake... :D
  65. Moeed Kazi

    AFIII Ozzy’s “Mr. Crowley” live.

    You sounded EXTREMELY BRILLIANT... just like Zakk.....couldn't believe my ears and eyes..... Initially was a bit confused because of the perfection of the whole band... sounded and looked like Zakk and Ozzy... The tone of patch.... is just freaking out of the world.....Amazing stuff Bishop...
  66. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Thanks, please let me know once you figure it out. I might also look in that direction.
  67. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Were you able to pin point the issue?
  68. Moeed Kazi

    DS-1 model anyone?

    Get it now, thanks for the explanation ......out of curiosity...in what modes are the opamps operating?... looks like voltage follower mode with R10 and R39 acting as load impedance..
  69. Moeed Kazi

    DS-1 model anyone?

    I am yet to install the latest firmware, So should we replicate the settings you have given to clone DS1? From what I read on forum we can play with biasing of diodes (both reverse and forward) and also the number of diodes (and its type) we can use... please help and elaborate.
  70. Moeed Kazi

    FC Controllers Now Shipping!

    Ha ha .. like wise... FC12 for me to. I am spending most of my time dialing delectable tones from Axe3 ..... waiting to the release of stable 3.02 firmware to try out the drives Cliff has been slogging on... I am sure they will turn out to be super AWESOME. Have been hearing the tones on the...
  71. Moeed Kazi

    FC Controllers Now Shipping!

    That's quite an investment when you move to AxeFX3 ...the rack mounts..... the FC .. then Pedal Boards....the pedal cases..... then cables....I am sure they are absolutely worth it ...I am still waiting for my FC ....
  72. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Great need to check out Shure surely then....:)
  73. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Was anyone from your band on wireless apart from yourself? Like your vocalist (on a cord less mic)? I suspect frequency collision/cancellation and wifi routers to be the culprits....if everything works great at home ..... then you know what's the problem.
  74. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Let me know what you find, have been facing similar issues. It drops especially if you are closer to any wifi routers around, from the venue pic you posted it looked like a closed venue ..and i suspect the wifi routers interrupting your guitar signal.
  75. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    The Venue looks mesmerising....:speakerthree::speakerthree::guitar::guitar: :D
  76. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Looks Stunning, are you using Line 6 G50 wireless? How is it holding up for you, I have noticed signal loss sometimes during a gig (if wifi around). I am sure the gig would have sounded awesome...owing to Axefx3 and the latest firmware (3.01) ...and off course your talent.
  77. Moeed Kazi

    Headphone Output pop when powering down

    Allrighty......Thanks for the quick response...
  78. Moeed Kazi

    Headphone Output pop when powering down

    Try the same with headphone output (front panel), switch off the unit while having your headphones hooked to your ears. You should hear a decent loud pop.
  79. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Looks DAMN AMAZING, Can't get better than this. .. . But why 4 expression pedals? I am assuming 1 for vol, 1 for expression, 1 for Wah. ... And the last one for?
  80. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    From my perspective, it depends on the manufacturer, I use Ibanez Weeping Demon Wah (WD7) it has a lever and can be used both ways like a normal Wah with a switch to turn it on and spring loaded. The best part, it has a timer function to disengage the wah in heel position. So you can set a brief...
  81. Moeed Kazi

    Axe-Fx III Firmware Version 3.01

    Sign of a PERFECTIONIST ... Thumbs up for this attitude.
  82. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    From what I have noticed on this thread is.. EV1's are an Overkill (I also have 2 EV1s) EV2's look a bit smaller....Mission pedals perfectly compliment FC12 in terms of size.
  83. Moeed Kazi

    Post Your FC-12 and FC-6 Pedalboards Here

    Can't tell you, how awesome it is looking...a big thumbs up (can't find the emoji) :D
  84. Moeed Kazi

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Will you be able to post a picture to make it easy for us to understand?
  85. Moeed Kazi

    Iron Maiden - Powerslave Dave Murray solo 1

    Hello, were you able to create that one patch with all the scenes? If yes, would you be so kind to let me know where do i find it... Is it on the exchange?
  86. Moeed Kazi

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Nice one Chris.....Hope to see more.
  87. Moeed Kazi

    FC Controllers Now Shipping!

    Hey Chris, hope you doing good. Ok, Is fractal planning any tutorial/ introductory videos? Just to showcase how smooth is the interface with Fx III? From my perspective at least this should be possible. The folks involved in this and the other numerous FC thread would be excited to at least see...
  88. Moeed Kazi

    FC Controllers Now Shipping!

    It's a bit strange that FC's are been shipped since the end of December and January and no one from the wait listed customers who received it have posted a simple "Yay" message.....or pic.
  89. Moeed Kazi

    Large-but-Precise Question re: FC-12 vs. RJM MMGT

    Hello Tim, Can you post some videos of the FC12? Layouts? Scribble Strips? ( I am assuming that you already have your FC, as you state that you have no trouble with FC strips)
  90. Moeed Kazi

    FC Foot Controllers

    Absolutely, Fractal should release some videos showing how awesome FC's are. This will at least feed our curiosities (folks who are on a later part of the wait list)
  91. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Wishing Everyone in the FRACTAL team and in this Forum ... MERRY CHRISTMAS and a Happy New Year.
  92. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Hey Chris, I am on the waitlist since the start, will I get an option to choose 6 or the 12, initially when Fractal started the waitlist, it didn't ask for which option, it only asked us to click on a FC waitlist link which created an automated email. Any information on that will be appreciated.
  93. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Keeping Fingers Crossed :) Hoping your reliable source is right.
  94. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Is it of this year 2018? :) we would be happy to hear that. EAGERLY WAITING.
  95. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Ah!! This is pretty recent, I wonder if fractal is still stating that the parts ain't available, does it mean more delay?? The parts unavailability message on this forum was posted almost 2 months back (approx.) Thanks for sharing it though, appreciate it.
  96. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    When exactly did you get this message, is it very recent? Though the same information has been communicated long back on this forum itself.
  97. Moeed Kazi

    Timing on availability of exact specs/photos of FC-6/12

    Thanks Chris for your understanding. Appreciate your response. Have a Good day ahead.
Back
Top Bottom