Search results for query: *

  1. P

    New update changed my output

    Oh, sorry. I will absolutely upload a preset that was affected.
  2. P

    New update changed my output

    Fixed Hi All, Thanks to everyone for chiming in. It is very much appreciated. Since I use the FX3 for gigging I needed a quick fix. Last night I reverted to firmware 16.05, which is what I had before the issues. I then copied all my backup files to the unit and as soon as I copied...
  3. P

    New update changed my output

    Hi GlennO, yes, that is the first thing I did. I then tried to restore my presets with the new firmware... no good. I also noticed that after the firmware update, my FC 12 no longer worked. I didn't give that much thought because I figured with the new firmware I would also have to update the FC12.
  4. P

    New update changed my output

    Thanks for the response GlennO. But as Mr Fender said, that change would have affected all, including factory presets, and that is not the case. All my files were backed up at MANY stages over the last 4 years or so but only the last backup is relevant. Should I reinstall the backup first then...
  5. P

    New update changed my output

    Correct, that is because I haven't had a chance to send them. This weekend I will try some stuff and if unsuccessful will upload Monday. Frankly I don't know how "my settings" are relevant. The only thing that changed was the firmware. Oh, and my FC also doesn't work now.
  6. P

    Reverting to earlier firmware

    Did not work.
  7. P

    Reverting to earlier firmware

    Yes, thank you. I'm aware of that and I was hoping 21.01 would fix the issue. It did not.
  8. P

    Reverting to earlier firmware

    I truly appreciate everyone's help.
  9. P

    Reverting to earlier firmware

    I already tried installing just the presets D, which is where my programmed presets are. Didn't fix the problem.
  10. P

    New update changed my output

    Hi Yek, That will be my last resort and thanks so much for the help.
  11. P

    New update changed my output

    Hi Chris, I haven't changed anything. The only thing that changed was the firmware. I only output to Output 1, that's it. No fancy stuff. When I'm home tonight I will save a preset that is not working and send it. Thanks for the help Chris. You have helped me in the past and I appreciate it.
  12. P

    New update changed my output

    Hi Yek, I didn't touch any front panel stuff. The only outputs that are affected are the ones I programmed. The factory presets work just fine. The headphones also work fine but only on the factory presets. Thanks
  13. P

    Reverting to earlier firmware

    Hi Mr Fender, Yes I backed up everything before any changes.
  14. P

    Reverting to earlier firmware

    THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Hope it works.
  15. P

    Reverting to earlier firmware

    Hi All, The newest firmware 21.00 screwed up my Axe FX3. I didn't update for at least a year fearing this kind of problem. I think I was running Firmware 16.0 or so. Is there a place where I can find earlier firmware to revert back to where it was? I looked on Fractal Audio's site and didn't...
  16. P

    New update changed my output

    I looked at the outputs
  17. P

    New update changed my output

    Hi All, Thanks in advance for help. Against my better judgement I updated my AX3 that "was" working perfectly well to the NEW big update. All the preloaded presets work fine however all the presets I programmed now have the output set to USB only. Do I have to go through every preset or is...
  18. P

    Pedal 4 problems on FC-12

    Hi Unix-Guy, You fixed it! When I went to the modifier you suggested I saw that the Pedal 4 was not selected. Thank you so much!!!!!!
  19. P

    Pedal 4 problems on FC-12

    Hi and thanks for the help. Much appreciated. Yes, when calibrating Pedal 4 the fader moves left and right but only in the calibration screen. The knob in the screen shot does not move, When testing pedal volume blocks 1,2 and 3 they all move as they are supposed to.
  20. P

    Pedal 4 problems on FC-12

    Yes, the volume 4 block.
  21. P

    Pedal 4 problems on FC-12

    Hello All, For some reason I cannot get Volume Pedal 4 to work on my Axe FX 3 FC12. I have 1, 2 and 3 working fine. I calibrated it in the FC configuration and it shows in MIDI/Remote external but no matter what I do I cannot get it to work. Any ideas as to what I am missing? Thanks.
  22. P

    Scene in the preset changed hitting the FC 12 switch

    Thanks Unix Guy, No switches set on FC to do anything but loop (never use), tuner and selecting a scene, that's it. I made no changes to the FX3. It was 6 feet away from me (in case it had Covid). Just hit switch(s) on FC12 and boom.
  23. P

    Scene in the preset changed hitting the FC 12 switch

    Hi All, Thanks to everyone that responded to my plight. I got my Axe FX3 home and did some checking based in part on comments here. I paged over to the meters and saw that the output levels were reduced by around half of what they should have been on both analog and USB left and right. I...
  24. P

    Scene in the preset changed hitting the FC 12 switch

    Thanks GlennpO, You are probably right on that but I always appreciate the suggestions. In any event I did turn on Scene Revert as he suggested anyway. :)
  25. P

    Scene in the preset changed hitting the FC 12 switch

    Hi Doug, Thanks for the suggestion. I will investigate that but I do have backups so I can restore to original. My concern is why did this happen and how do I prevent it in the future?
  26. P

    Scene in the preset changed hitting the FC 12 switch

    Thanks for the comment TG3K. I know I'm not crazy so I'm glad you chimed in. I've been using this setup since it came out and never had a problem like this but I assure you, it did happen. I can understand strange things happening but what gets me is that the change was saved. You would think...
  27. P

    Scene in the preset changed hitting the FC 12 switch

    Hi Unix, Thanks, I will look at the amp block to see if that was somehow changed and yes, you are a helpful bunch and it's important to let you all know that we appreciate it. Re: Internal Magic - Exactly my concern because I've used this unit since it came out and NEVER had this happen...
  28. P

    Scene in the preset changed hitting the FC 12 switch

    Hi Unix Guy, Thanks, I appreciate the help. Yes, I owned a computer business and serviced AMIGA computers back in the late 80s and early 90s when you didn't fix computers by swapping boards but rather by replacing ICs. Just to clarify, I am using Layout 2 - Scenes Chris and some others have...
  29. P

    Scene in the preset changed hitting the FC 12 switch

    I appreciate the help but not the semantics. In terms of computer technology, which is what this is, corrupted is what has happened. The scene changed and no longer worked. The scene in the preset changed and saved into memory. The scene no longer had any volume even though the parameters in...
  30. P

    Scene in the preset changed hitting the FC 12 switch

    Hello, Thanks for the response. By corrupted I mean it was changed/altered/different from what I programmed. I did nothing to make this change, which was permanent and occurred only with my foot. The question is, how can permanent changes be made to a scene with my foot?
  31. P

    Scene in the preset changed hitting the FC 12 switch

    Hi All, After using the AXE FX3 setup for a couple years now I had a strange thing happen today for the first time. While playing I changed scenes and the scene I changed to was corrupted having no volume. Even one of the other scenes in this preset was corrupted. I think I hit more than one...
  32. P

    Scribble Strip issue

    Hi Chris, Thanks for the help. Yes, I have each switch set for a different scene. I looked at the "Mini-Display" section of Axe Edit FC Controllers and I don't see any references to "Toggle", "Current" or "Destination" there. If you can point me in the right direction I'd appreciate it. In the...
  33. P

    Scribble Strip issue

  34. P

    Scribble Strip issue

    Hi All, I just finished setting up a preset and I named each scene a different name and they all read correctly until I hit scene 6. Let's say scene 5 is called Dog and scene 6 is called Cat. I see those names on those scenes, however, when I hit scene 6 which shows Cat, the scribble strip...
  35. P

    Stand In Switch

    Thanks Chris, I wasn't using Axe Edit III, I was working from the Axe FX3 front panel. When I saw the video and saw the Axe Edit III part of the video I went into it and just set the switch to "toggle" between the two scenes I want to go back and forth between and it works perfectly. That Stand...
  36. P

    Stand In Switch

    Hi Chris, Thanks again for the quick help. I'll check this out. I set up the switch in Setup/FC Controllers/Stand-In Switches FC1 SW1 Layout 2 Scenes 8: Scene, Select I misspoke earlier, I'm trying to switch back and forth between scenes within the same preset. I have to get used to the...
  37. P

    Stand In Switch

    Hi Chris, Thanks for the response. You were so fast responding I hate asking for clarification but how or where would I do that? Party
  38. P

    Stand In Switch

    Hi All, I looked but didn't see a post answering my question. If there is one please direct me to it. With my stage setup my FC12 is too far away from me where I can get to it to change a preset. So I configured a Stand In switch that can be right next to me when I need it. It works great...
  39. P

    Question about updates and block changes within a scene

    Hi Chris, Thanks for the response. Correction, Filter block not Line Level Block (going from memory). Something changed. Could have been an amp block that I'm using that was changed by the firmware update. I'll check which amp block it was this weekend when I'll be using the Axe FX 3. It was...
  40. P

    Question about updates and block changes within a scene

    Hi All, Question: Will updating the firmware on the Axe FX 3 affect or change block parameters that are already programmed into scenes within a preset? The reason I ask is that I have a particular preset programmed for a particular song. I haven't used this preset for 6 months but I have...
  41. P

    Need Help FC-12 with Firmware 1.06

    Thanks again Chris. It worked! You're amazing.:)
  42. P

    Need Help FC-12 with Firmware 1.06

    Thanks so much Chris. Seems logical since I went to older firmware. Will try. Much appreciated!!!!!!!!!!!!!!!!!!!!!!!
  43. P

    Need Help FC-12 with Firmware 1.06

    Hi All, I hope what I did can be reversed. I understood that there was a firmware update for the FC-12 1.06. I looked at the Fractal download section and the newest update was 1.05, which I have. So I searched Fractal Firmware 1.06 and there it was. I downloaded it and installed. The problem...
  44. P

    Tone Matching

    Hi All, I've tried in vain to Tone Match with the Axe FX 3. The only instructions I see for Tone Match points to the Axe FX 2, but the menus on the Axe FX 3 are different, like what is "Solo Reference"? I didn't seem to need to hit the solo reference button to get the reference signal into the...
  45. P

    Volume pedal and the Axe-Fx III with FCB1010

    I'm only using one midi cable "Midi out/Thru". I intend to buy the FC12 when it comes out in September for exactly what you mentioned above that you won't get from the FCB 1010. But at least for now you have something to control the Axe 3 for live shows. :-)
  46. P

    Volume pedal and the Axe-Fx III with FCB1010

    Hi Saint Chuck, Sorry for the delay in getting back to you. There is good news and there is great news. The good news is that the FCB1010 does work with the Axe FX 3, the great news is that as you start understanding it's operation it becomes very easy. Many of my problems were just me not...
  47. P

    Volume pedal and the Axe-Fx III with FCB1010

    First of all I'd like to thank everyone for chiming in with suggestions. I needed a third expression pedal anyway for a steel guitar that will go into input 3 of the Axe FX3 so I picked one up today. I plugged it in and set the volume block for Pedal 1 and had the same problem, so now I knew it...
  48. P

    Volume pedal and the Axe-Fx III with FCB1010

    Thanks for the suggestions. I tried calibrating the pedals but the lowest number heel down was 14 and it should be <10. So I checked out the link you sent and opened the FCB. I can't believe Behringer released the senors so poorly aligned. I adjusted both of them and now get heel down number of...
  49. P

    Volume pedal and the Axe-Fx III with FCB1010

    Hi Guys, Thanks some much for the help. I tested both expression pedals. The volume pedal (left) doesn't go all the way off however the wah (right pedal) does. I already calibrated the pedals but you might be right that it is a calibration issue. I'll try it again. Auto engage is OFF...
  50. P

    Volume pedal and the Axe-Fx III with FCB1010

    Hi All, I'm trying to set up my FCB1010 (with Eureka Prom chip) left expression pedal as a volume pedal on my Axe FX 3. I have the left expression pedal set as ext 1 for the volume block and the right expression pedal set as ext 2 (wah block). The wah works fine but the volume pedal doesn't...
  51. P

    FCB1010, III, Channel...

    Thanks to those that helped me. The pedal is finally working but I'm not sure exactly how it happened. I used the idiot's guide to the FCB1010 and followed the directions for setting the midi channel to 1. I didn't expect it to work because the chip is different (Eureka Prom) but desperate...
  52. P

    FCB1010, III, Channel...

    Thanks trancegodz, It's hopeless... I have 3 midi cables one of which is brand new and I tried all of them but no luck. Under General I set the Midi Channel to 1. No error codes flashing either. I'll keep searching for an answer. My keyboard player is away at the moment. When he returns...
  53. P

    FCB1010, III, Channel...

    Hi trancegodz, Thanks so much for taking the time to try to resolve this for me. I did as you suggested but the problem still exists. Summary: Under PC Configuration I turned Program Change to "ON". All CC numbers were added to the "Bypass" area. I have the Midi Channel set to "Omni" since...
  54. P

    FCB1010, III, Channel...

    Thanks for the help. I'll continue looking at the FCB1010 then. Maybe I'll find something that I've missed.
  55. P

    FCB1010, III, Channel...

    Thanks unix-guy, This is where I get lost. As in step 7 above under "external", I have it as: External Control 1 16 External Control 2 17 Under General I have it as: Midi Channel 1 (I also tried Omni). Any ideas? Thanks.
  56. P

    FCB1010, III, Channel...

    Hi trancegodz, I am a complete novice when it comes to midi. I've been reading and watching videos trying to get my Axe FX 3 and FCB1010 with Eureka Prom 3 chip working together but with no luck. I followed the instructions you gave above, but again, no luck. The FCB1010 appears to be working...
  57. P

    Custom front panel to rear instrument input has drop in power [solved]

    Hi iaresse, Thanks for helping. Today I heard from Chris at Redco Audio in CT who built the panel for me. He told me to check to make sure the black sheathing on the hot wire (tip wire) was pulled back and not making contact with the soldered end. Sure enough, that was the problem. I thought...
  58. P

    Custom front panel to rear instrument input has drop in power [solved]

    Hi and thanks for the suggestion. I am using the same unbalanced guitar cable for all tests.
  59. P

    Custom front panel to rear instrument input has drop in power [solved]

    Hello, I'm a proud owner of an Axe FX 3 and as such want to keep it beautiful, safe and sound. So I picked up a case, a Furman power conditioner and a custom panel from which I can plug into instrument input, inputs 2 and 3, outputs, etc without having to access the rear of the Axe FX 3. So I...
Back
Top Bottom