Search results for query: *

  • Users: JPE
  • Order by date
  1. JPE

    Micheal Thompson Vibrato?

    Do you have a soundclip or preset?
  2. JPE

    Audio dropping, ASIO crashing

    I gave it a quick reading. I think I go for option 4. Something for tomorrow
  3. JPE

    Audio dropping, ASIO crashing

    it's on windows 10. I did find the v5.62 version and installed it. That one wasn't yet on the european website. My problem remains if I setup studio with a generic asio driver from my soundcard I can playback a song, but I don't have the Axe FX III inputs to record with. I did have that when I...
  4. JPE

    Audio dropping, ASIO crashing

    Yes, I have version 5.58.0
  5. JPE

    Audio dropping, ASIO crashing

    No, I can define only one audio system in the studio setup
  6. JPE

    Audio dropping, ASIO crashing

    For one reason I did not had this issue when I used Cubase 11 or 12. After installing the update Cubase 13 Pro, this issue occurred. I don't know if the installment process changed things on my PC (windows 10). Recording with the Axe FX has always been plug and play and didn't need any...
  7. JPE

    Audio dropping, ASIO crashing

    Oke, When in Cubase 13 in Studio setup I define the FAS ASIODriver Axe-FX III the playback of the entire song will be through the AXE FX monitors. I want that to be through my studio monitors. They get it through my soundcard, the Aus Xonar Essence STX. But since the FAS ASIO driver is setup...
  8. JPE

    Audio dropping, ASIO crashing

    What would your suggesting be to use an AxeFXIII in conjunction with Cubase 13. What driver is better than the asio4all?
  9. JPE

    AFIII Jeff Beck tribute - "Diamond Dust"

    Your playing does him justice. Very tasteful (like always....)
  10. JPE

    AFIII Brett Garsed improv solo

    Brett, like always...perfect playing. Your tone and phrasing never sees to amaze me
  11. JPE

    Cut through the mix: something I do not understand

    Cooper, Thanks for your three tips. My question: is there a difference of using the Low cut and High cut in the Cab section of the Cab block or using the low cut and high cut filters in the preamp section of the cab block?
  12. JPE

    Fractal Friday with Cooper Carter!

    I admit, I'm new to this. I use Cubase 11 with the Axe FXIII. I have the USB cable hooked up, in Cubase I see 8 inputs for the Axe FX but I only get sound out of input 1 and 2. No direct signal, not any signal, if I use input 5. What do I do wrong? Any help?
  13. JPE

    Setting outputs with different layouts.

    This is my standard: Out 1 is for the FRFR monitor, Out 2 bypasses the Cab block and is for use with the Matrix power amp and two 1x12"speaker cab, Out3 - In 3 is in use for outboard gear (Shiva the Wave and Eclipse)
  14. JPE

    Setting outputs with different layouts.

    Normally my effects (reverb, delay, etc) are after the cab block. In this way the cab block will have to be at the end of the chain, just before Out1 and the split will be just before the cab block to go to Out 2. Will that be affecting the sound too much?
  15. JPE

    Post Your FC-12 and FC-6 Pedalboards Here

    Nice, did you buy this or made it yourself. Probably not possible with led indication?
  16. JPE

    Post Your FC-12 and FC-6 Pedalboards Here

    What are the four switches in front for?
  17. JPE

    Running to FRFR and real cab - best I/O options?

    I use out 1 to FRFR (PA), out goes to the matrix, and then into two 1x12 TT-cabs. I use out3-in3 as an effect loop for my Shiva wave tri-chorus
  18. JPE

    Most desired tones that you don't already have?

    Kim Mitchell's lead tone from Akimbo alogo album
  19. JPE

    Post Your FC-12 and FC-6 Pedalboards Here

    thanks. I'll try that one
  20. JPE

    Post Your FC-12 and FC-6 Pedalboards Here

    Did you made the switch yourself or are they for sale? (nice and small)
  21. JPE

    Accidentally deleted preset

    No, for one reason I must have deleted it before.....:(
  22. JPE

    Accidentally deleted preset

    No, this wasn't the one. I don't recall from which forum I got it
  23. JPE

    Accidentally deleted preset

    No, accidentally wrote another pre set over it
  24. JPE

    Accidentally deleted preset

    over the last week I downloaded a high gain pre set which had 8 scenes with different amps (AC / CAE3+ / Friedman and more) with in some a phaser block. I accidentally deleted it but it sounded great. Does it ring a bell for anyone? Do you know where I can find that pre set? I cannot find it...
  25. JPE

    Post Your FC-12 and FC-6 Pedalboards Here

    Build a case for it: hate it when my bandmates step on my connectors and they are even more protected against audience participation:)
  26. JPE

    AFIII Presets ZenRigs Ultimate Preset Pack (including morphing presets) available NOW!

    Hi Sukh, I’ve been struggling to get my guitar tone cut through the band mix. The sound of the Brown Sound morphing patch from ZenRigs that I use now, does that perfectly. At low volume you might think it’s too muddy, but at band volume my guitar tone is right there to be heard. Great. And the...
  27. JPE

    AFIII My new Trichorus!

    Yes!!! Thank you for your work. I'll try it this afternoon.
  28. JPE

    Is there a way to ''batch" change out 1 in out 2?

    In my presets I've set out 1 to go FOH (larger veneus) and out 2 to my speaker cabinet (for small clubs). At home I use a cabinet to monitor and change the different presets, but first I always have to change out 1 to out 2. Is there a way to replace ou1 to out 2 as a "batch" command?
  29. JPE

    Channel switching

    Thanks to you both. It works. That wasn't that hard....
  30. JPE

    Channel switching

    Who can help me out? I want a preset using two amps: I define the 4 type of amps 1 and 2 in the channel section and save after every alteration. Next I define the amps: in the amp 1 I choose a preset out of my block library and next all 4 channels of Amp 1 have the same amp type and the 4 I...
  31. JPE

    Am I the Only One Not Using High or Low Cuts Anymore?

    Does it matter if you do the cut in the Cab section or in the preamp section?
  32. JPE

    Having trouble with SP-1 and bypass

    That worked. Thanks
  33. JPE

    Having trouble with SP-1 and bypass

    If I calibrate the Mission pedal sp-2 as FC pedal 1 and assign it f.i. to a volume pedal the value won't go higher than 9, while manually it can reaches 10. I calibrated multiple times, but I goes no higher than 9. Is there a sollution to this?
  34. JPE

    My favourite new power amp! Seymour Duncan Power Stage 170

    New AxeIII owner. I use the matrix GT1000FX as an amp with two 1x12"speaker cabinets. Most of the time I play in small clubs where I use output 2 to the Matrix. In the setup I have the poweramp modeling on and cabinet modeling bypassed and output mode in Speaker drive set to SS Pwr Amp + Cab...
  35. JPE

    AFIII My new Trichorus!

    Is this preset available for download? Then where can I find it. Thanks: best trichorus I have heard so far
  36. JPE

    Axe-Fx Live Tips

    Hi Peter, Thankx for the interesting article. I too have some difficulty cutting through the band mix (drums, bas, keyboard, pedal steel, acoustic and me on electric guitar). We play at local clubs, just the backline with no PA. I use a 1x12 TTcab, if possible stereo 2x 1x12TTcab. I adjusted, in...
  37. JPE

    Midi connection to external 19" equipment

    Who wants to help a new midi user? I want to connect my Axe fx II to a external 19"equipment via midi out to midi in. I use the MFC with faslink for program changes. If I change a patch on my Axe fx II, I want the external device to follow to a different patch as well. Can someone tell me, step...
  38. JPE

    michael thompson clean sound preset

    Simeon, great you joined in. Your delay blocks are indeed great!!! I'm getting there closer: the fix shifter doe a great job. In the video at 18:00 the compressor discussion starts: he uses two compressors, the Silky comp to add presence. Do you have any suggestions on using what comp from the...
  39. JPE

    michael thompson clean sound preset

    Your last sentence is off course the most important........ If you have a song in 90BPM what is the calculation to set the delay right? Is this the same for what you say about modulated reverb?
  40. JPE

    michael thompson clean sound preset

    Can't be we're the only two looking..... I recently saw a Helix patch claiming the Thompson sound, won't help us
  41. JPE

    michael thompson clean sound preset

    Did you ever get a respons to your question? Still looking too.......
  42. JPE

    Recording in Cubase with Axe FX

    If I connect my Axe FX II with the USB cable direct to my computer I get the choice of 4 inputs in cubase. If I choose mono input I can record over 4 tracks: it seems that input 1 and 2 are the fractal sound and input 3 and 4 the dry guitar signal. If I choose stereo, input 1 and 2 are the...
  43. JPE

    Petrucci and Cantrell Wah

    Finally found a good lead wah sound. Thanks. And... the first post starts at 2009!! What a wealth of information is on this forum.
  44. JPE

    Never enough of Cliffs Of Dover performances ;)

    Thanks. I'll try the delay settings.
  45. JPE

    Never enough of Cliffs Of Dover performances ;)

    Amazing!! watched the whole video. Nice playing. What are the delay settings? Or could you upload this preset?
  46. JPE

    Live Presets DI

    I encountered the same problem. After a gig someone said "I see you're doing great things, but I cannot hear it". My "bedroom" sounds are great but to transfom them to the stage is a differen thing. The sound gets eaten by the rest of the players. I now put a 5 band eq in front of it: -1.5...
  47. JPE

    Singtall Superpack of presets are ready!

    Very interesting Could you look into the Michael Thompson sound? His clean and lead tones with the eventide h3000 modulated delays. For instance listen to Michael Thompson song Future Past or more recent the Roacha album, the song lies
  48. JPE

    Interesting Reverb trick

    Can you make a screenshot of the routing you use now?
  49. JPE

    Free Preset/IR Bundle Gift in Celebration of FW Q8.01

    Great. The lab L5 was my first big amp that I bought back in 1981!!! I am very curious. Thanx
  50. JPE

    Van Halen - Panama Tone Match

    Nice tone and ambience
  51. JPE

    Mark Day tone match

    What great sounds!!!!
  52. JPE

    Get out your air guitars. More Night Ranger shred....

    Nice playing. Like the Brad tone very much
  53. JPE

    Taylor 616ce & 618ce Tone Matches - More added :)

    Nice work. I like them very much
  54. JPE

    Dokken - In My Dreams

    Nice sound. I like the reverb touch
  55. JPE

    Introducing: The ML Brit Family IR Collection

    Tempting offer. Great work
  56. JPE

    80's hero's preset bundle interest?

    This sound is one of my favourites now
  57. JPE

    Another Tri-Chorus thread

    Did you already post your all chorus presets?
  58. JPE

    Wonderful Q8.01 clean

    I like it, great work
  59. JPE

    Moke's Q8.00 Axe-Fx II Presets Released!

    Just got your Acoustic sim: they sound great!!!
Back
Top Bottom