Search results for query: *

  1. Laurent-G

    Discussion en français !

    Bonjour a tous , je decouvre tardivement ce topic ......
  2. Laurent-G

    difference between cuts within cab block (cab section vs preamp section)?

    Personally I often mix 2 IRs and I make a global correction with the EQ of the preamp, the preamp is Off. It's easier and more efficient that way.
  3. Laurent-G

    how do you control high end when going real power amp and cabinet ?

    Putting a filter block after the amp block with a well-tuned low pass should easily solve the 20hz-20khz problem. Personally, I always have an IR block behind the amp block with a low cutoff at 100hz 12db/oct and 6khz or 7khz high cutoff with 12 or 18db/oct. I do not play on a FRFR but on GFR...
  4. Laurent-G

    FM3, FM3+FC6, FM3+FC12

    FM3+FC6+3 Exp.Pedals
  5. Laurent-G

    Free Patch and tutorial - MF 1987

    Yes of course, but I noticed that CPU> 80% the FM3 is less responsive to control by the FC6 switches, so I always try to keep the CPU below 80%
  6. Laurent-G

    Free Patch and tutorial - MF 1987

    Thank you Marco, On the FM3 CPU load> 80%, I prefer to remove the Reverb block and keep the Plex Verb active on all scenes, the CPU load is then at 70%
  7. Laurent-G

    Where in your preset chain do you put your noise gate?

    The intelligent noise gate of the IN block works very well for me so at the beginning of the chain
  8. Laurent-G

    Wish More versatile modifier channel assignment

    I attach my request which is identical https://forum.fractalaudio.com/threads/multiple-selection-for-control-channels.175656/
  9. Laurent-G

    Wish multiple selection for control channels

    I would like that we can choose not one channel or all, but 1, 2, 3 or 4 channels simultaneously
  10. Laurent-G

    Select the channel of a block at once for all scenes?

    Like on the AX8, the FM3 has some limitations which do not seem technically justified and that irritates me sometimes ....Given the limitation of FM3, the best solution to approach what I want to do is to use a control switch and set the output level of channel A of block IN1 . thank you all for...
  11. Laurent-G

    Select the channel of a block at once for all scenes?

    yes thank you, indeed as it is possible, to control in this way a change of channel would be perfect, but I suppose that it is not possible, it is not the first time that I block on this problem of control channels of a block
  12. Laurent-G

    How do you get your clean

    CA3+ clean or dirty clean with preamp booster
  13. Laurent-G

    Select the channel of a block at once for all scenes?

    the control switch actually allows to activate or deactivate a block on all the scenes but how to change the channel of the block IN1 and that it remains active, an intermediate solution would be to activate / deactivate a block filter or PEQ or VOL in this way but that adds a block in the...
  14. Laurent-G

    Select the channel of a block at once for all scenes?

    Hello, I am submitting to you a small problem that I cannot solve. I want to be able to control the input level of my guitars that I connect to the FM3, for example 2 strat which would have different levels because of a modern or more vintage microphone set. I think I use the adjustable gain in...
  15. Laurent-G

    Filter Block question

    for me, the starting point is in the IR block low cut at 100 hz -12db/dec hichcut at 6500-7500 hz -12db/dec and the lowcut switch On in the AMP block
  16. Laurent-G

    digital artefact with expression pedal

    L 'input trim me permet d avoir un bon controle du drive donc c 'est parfait ! Une autre solution serait d'utiliser le gain du preamp , mais deja utilisé sur une autre canal du block AMP avec la simulation Atomic High .....La troisieme solution serait de mettre un block DRV en amont du Block AMP...
  17. Laurent-G

    digital artefact with expression pedal

    thank you for your answers, I will try with the input trim
  18. Laurent-G

    digital artefact with expression pedal

    Hello, I control the drive of a JM45 with an expression pedal, this causes digital artefacts, is there a solution to avoid crackles ?
  19. Laurent-G

    FM3 Firmware Version 4.00

    I solved the sound loss problem by replacing Friedman with the atomic high, no more problem, I have no explanation for the sound loss with Friedman models.
  20. Laurent-G

    Wireless System from Guitar to FM3

    No probleme with the BOSS WL20
  21. Laurent-G

    FM3 Firmware Version 4.00

    I started tweaking my patches with firmware 4.0, doing comparative listening between Friedman HBE 2010 and the HBE C45. I see freeze with Friedman HBE C45. other have people noticed this problem ? does not give too much confidence in the stability of firmware 4.0
  22. Laurent-G

    FM3 Firmware Version 4.00

    I will test, hoping not to have the sound cut as with the beta versions
  23. Laurent-G

    Output 2 (Global) softer than Output 1

    D'ont use beta firwmare for live gig .....
  24. Laurent-G

    FM3 Firmware Version 4.00 beta 5

    2 losses of sound after 2 hours of use, no freeze but no sound, reboot of the FM3 necessary
  25. Laurent-G

    [fixed] OUTPUT 2 GLOBAL EQ

    downloaded last night, tested quickly, it seems to me that the problem has disappeared. This afternoon I'm going to test the sound cutoff problem that appeared with my expression pedal. it was necessary each time to restart the FM3
  26. Laurent-G

    FM3 CPU Performance Dismistified

    Yes, sharing would be nice, I'm curious to see what my FM3 will take as a CPU load, normally the same causes produce the same effects .... Personally, if possible I avoid the Drive block which is very expensive in terms of resources or the not putting Verb block .....
  27. Laurent-G

    FM3 Firmware Version 4.00 beta 3

    Always my problems of loss of sound when I use an expression pedal to control parameters of the AMP block with the Friedman profile, I have to restart the FM3, it seems random .... I reload the firmware 3.02
  28. Laurent-G

    FM3 Firmware Version 4.00 beta 3

    It is strange to make a link between the ventilation problem of the FM3 and the European electric network at 50hz
  29. Laurent-G

    FM3 Firmware Version 4.00 beta 3

    Not for me .... Still the same problem with the following configuration, which worked perfectly in 3.02: I / O -> OUTOUT CONFIGURATION 2 Output2Copy = OUTPUT1 SETUP Menu -> EQ TYPE -> Output2 = Parametric or graphic does not work A possible workaround to this problem is to add an OUT2 Block...
  30. Laurent-G

    [fixed] OUTPUT 2 GLOBAL EQ

    with firmware 3.02, I only use only out1, I can control the EQ globals of the Setup as I wish for each physical output independently. With firmwre 4.0b2 this doesn't work. For this to work I have to add an out2 block and in the I / O of the FM3 Output Configuration / Output to Copy = OUTPUT 1
  31. Laurent-G

    Bug? Firm 4.0b1 Bug with expression pedal

    j'utilise une pedale d expression pour controler des parametres de differents bloques, de temps en temps je n'ai plus aucun son, le FM3 n'est pas gelé, je suis obligé de faire un on/Off pour retrouver le son. le bug est difficile a reproduire mais il semble lié a l utilisation de la pedale d...
  32. Laurent-G

    [fixed] OUTPUT 2 GLOBAL EQ

    Same observation with firmware 4.0b1, I usually use ES out to correct the sound on my ERIS5, the corrections have no effect.
  33. Laurent-G

    FM3 Firmware Version 4.00 beta 1

    In the Setup , in think EQ type d'ont work .
  34. Laurent-G

    Fixed Switch-Display FW4.00 Beta1

    Restart FM3 , it's OK for me !
  35. Laurent-G

    Fixed Switch-Display FW4.00 Beta1

    Left switch display shows no writing! Same problem for me !
  36. Laurent-G

    CPU saving tricks?

    I will add, use the reverb of the Plex block instead of the Reverb block
  37. Laurent-G

    Creating Jazz Guitar Tones (First Post)

    L'idee que je me fais du jazz tone, c'est un Class-A dans le block AMP et 2 IRs mixés un JC120 et un twin verb plus quelques petites choses avant et apres ces 2 blocks :) Cela permet d'avoir un beau son tres clean et du soft crunch tres sympatique. Google translate: My idea of jazz tone is a...
  38. Laurent-G

    FM3 Firmware Version 3.03 beta 1

    BUG : Tested this morning, I have a bug on the left mini LCD of the FM3, the contrast does not work correctly, unfortunately it does not show on a photo. I go back to version 3.02
  39. Laurent-G

    Headrush frfr boomy

    I also tried a 108 Headrush, I used a high pass filter at 130 or 150 Hz to calm the bass effectively an invasive, if that is not enough a low cut switch in the amp block is quite radical, I use it systematically for live patches ;)
  40. Laurent-G

    "Natural" sustain?

    Try : Gain enhancer
  41. Laurent-G

    Preview a cab on selection

    and using the FM3 looper is convenient to make the choice
  42. Laurent-G

    Lead Boost - Expression Pedal

    Hello, here are some screenshots of the uses I make of expression pedals. Remember to read the FM3 documentation on this subject I think capture3.png is a good option for your need to engage the boost at the end of the pedal stroke Strat.x.png screenshots show the use of an input boost which is...
  43. Laurent-G

    All-In-One or Do you use Effect pedals as well?

    in my patch you can remove the Rotary or the Drive it will give a little margin to have the reverb and be under 80% of CPU load
  44. Laurent-G

    All-In-One or Do you use Effect pedals as well?

    All in one for me. indeed, it is the REVERB that consumes the most resources, then it is the DRIVE block if we consider that the AMP and CAB blocks are compulsory. To save a little CPU load I replace the REVERB block with a PlexDLY to do a basic reverb. and this adds some possibilities with the...
  45. Laurent-G

    Favorite amp/cab combos for clean and edge of breakup

    For a good jazzy sound i use FAS Class A with a JC120 IR .
  46. Laurent-G

    Favorite amp/cab combos for clean and edge of breakup

    Shiver clean, CA3+ clean
  47. Laurent-G

    Best FRFR for FM3 (Poll inside)

    yes, powerful and cheap, but not a very good rendering for my ears
  48. Laurent-G

    2.0 CPU?

    here is a better configuration to save CPU
  49. Laurent-G

    Best FRFR for FM3 (Poll inside)

    For me , the best are CLR or RedSound , i don't like the Headrush.
  50. Laurent-G

    2.0 CPU?

    with the blocks I use , doesn't change anythingit
  51. Laurent-G

    FM3/FC6 (OMG9) board setups?

    Hello, can you put a picture? How did you fix the FM3 and CF6?
  52. Laurent-G

    AX8 Funky ! ;-)

    Cool , je vais chercher les sysex :)
  53. Laurent-G

    Best way to set up a Lead Boost for Solos?

    Hello, to boost the solo I use a block filter, see the screen copy. Greeting
  54. Laurent-G

    Free Bank of Presets for AX8, Clean to Lead with extras!

    Hi Chris, I can't find any link to download les free pacthes for AX8 on your site ....:veryconfused:
  55. Laurent-G

    Post pics of your bedroom/practice set up including frfr amplification

  56. Laurent-G

    Parrallel block level question

    2 blocks in // increase of +6db ( 20 log 2 ) , 3 blocks increase of +9.5 db ( 20 log 3 ) :christmastree:
  57. Laurent-G

    Help Understanding Volume jump when placing FX in parallel?

    2 blocks in // -> +6dB , 3 blocs in // -> +9db ......
  58. Laurent-G

    Piezo Pickup What amps sound best?

    Hello, Try this Preset
  59. Laurent-G

    Protector for playing live

    Thank you :grinning::grinning:
  60. Laurent-G

    Protector for playing live

    hello, where did you find the big buttons on the switch ? :)
  61. Laurent-G

    Using A/B Switch for 2 guitars in AX8

    Hello, I use the BOSS AB-2 pedal
  62. Laurent-G

    Hi-cut in cab block?

    low cut at 120 hz, high cut at 6.5 khz or 7.7 khz / -12 db/oct ;)
  63. Laurent-G

    AX8 and Acoustic?

    Hello, I posted a file containing a patch that I use with my Godin A6 Ultra, this may help. I use a Yamaha DBR10 amplifier.
  64. Laurent-G

    Problem With Active Pickups - Help!

    Hi, no problem with my Godin A6 Ultra , il use the mixed output ( piezo + humbucker) and connect the guitar to the standard guitar input of the AX8. In the I/o menu IN1 = 6db.
Back
Top Bottom