Search results for query: *

  1. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    Yes the replacement arrived on time. My new spark cab still has a very low amount of Hiss - almost non existent- You have to put your ear in front of the speaker to hear it. Standing up in front of the cab, You can't hear it I measured (with a db meter app on my phone) about 3-4 db of noise...
  2. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    The Plot Thickens ........ My power switch on the back was starting to be flakey - some times would not turn it on the first time.. So I contacted Positive Grid and Reqested and RMA to return the Spark Cab on their dime due to power switch and hiss from day one. They got back to me in less...
  3. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    Bit of an update : Took my Spark Cab to band practice and it sounded great with my AxeFX III . I had tweek the global EQ on the output of the AxeFX to tame down some of the bass. To my ears it sound more like a guitar cabinet then the Yamaha FRFR speaker I usually use. It think it is the...
  4. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    UPDATE: I recieved my Spark cab -- after breaking the speaker in for 24 hrs here is what I noticed CONS: ISSUE: the Cab spews about 20db of white noise (measured with iphone app at 12 inches from speaker) nothing plugged in and volume on 0 ( it seems many users are reporting...
  5. CurvedLight

    INSTR Input on front panel died all of a sudden ?

    UPDATE : Fractal support as well as ntoalemming suggested looking at the internal ribbon connectors I removed the lid and found the ribbon cable to the small input board totally disconnected and the connector to the motherboard was also loose. After plugging them both in the AFX input on the...
  6. CurvedLight

    INSTR Input on front panel died all of a sudden ?

    I was playing my AxeFx using a cable plugged into front INST and it started to sound strange "digitally distorted" - I changed guitars and cables and in the process there we some noticable pops - nothing too loud - then all of a sudden the input went completely quiet . NOW When I insert a...
  7. CurvedLight

    Wish FC Expression Pedal values sent via Midi Out jack

    After reading the manual I did not see the following capability... When an expression pedal connected either to an FC controller is being used can the the AxeFX transmit MIDI CC messages based on the Expression Pedal position via Midi Out connector to another Midi device ? Why ? It would be...
  8. CurvedLight

    FC Expression Pedal values sent via Midi Out jack ?

    Not possible with the current firmware.(I assume this is what you mean) But it could be done with some additional software. I will add this to the wish list ......
  9. CurvedLight

    FC Expression Pedal values sent via Midi Out jack ?

    After reading the manual I did not see the following capability... When an expression pedal connected either to an FC controller is being used can the the AxeFX transmit MIDI CC messages based on the Expression Pedal position via Midi Out connector to another Midi device ? Why ? It would...
  10. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    You may be on to someting about the tweeters -- the spec page mentions "stereo inputs" for the SPARK amps and XLR inputs .......But the output is XLR is mono for sure. The FAQ mentions its a MONO FRFR cabinet--- so who knows I guess the first thing I try when I get it is a ping pong delay patch...
  11. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    From the FAQ I see other powered cabinets that say they are 2000 Watts. Spark CAB is 140 Watts. How does its volume compare? When we say that Spark CAB is a 140 Watt cabinet, we are measuring how much output our power amp can produce. This is measuring RMS or root mean square. RMS watts refers...
  12. CurvedLight

    Anyone else pre-order the new SPARK CAB powered FRFR ?

    I ordered one to go with my spark mini but also to see how well it works as a potential backline for my Axe FX III . I could not resist the $269 intro price for 140 Watt Class D , 10 in woofer and 2 tweeters FRFR ,under 30lbs and "looks like a guitar cab" Here a link for more info pictures ...
  13. CurvedLight

    Condensation under LCD Screen?

    in my earlier post in this thread I explained the fix. Basicly I opened it up and got the the screen and wiped it down. Then you use distilled water moving forward I finally did this - when You could not even buy distilled water in AZ a few months ago - I paid $300 for a unit that produces 1...
  14. CurvedLight

    Condensation under LCD Screen?

    Since this post of mine recently got some attention I thought that I would share my results and learnings...... 1. As for the Original issues of how to get the mineral dust/condensation off my AXE FX. After contacting Fractal support they gave me detailed instructions on how do disassemble the...
  15. CurvedLight

    Axe-Fx III 16.00 Beta 11 "Cygnus" Firmware - Public Beta #8

    I live in Gilbert -would like to see any other members play out live as well ....
  16. CurvedLight

    Looper Question

    As already mentioned looper must be present and enabled in BOTH presets. To play the sound of the first preset in the looper make sure you have the looper at the end of first preset in order to get all of your presets FX.
  17. CurvedLight

    Band in a Box 2021 (review with demos)

    I have 2014 BIAB - my only complaint is that it ONLY runs at 44.1Khz .... My default setup for my AxeFX3 is with spdif and it only works at 48Khz. The only way I can use them together is to go analog out from my AxeFX into my interface. For some reason running those "extra" analog cables bugs...
  18. CurvedLight

    Home Skoolin... Anyone Familiar with it? I am...

    Love Uncle Larry's playing and teaching style. Been subscribed and watched all his videos since early last summer. He's got tone for days ...
  19. CurvedLight

    Guitar To MIDI Recommendations

    Your are Correct - I edited the post :)
  20. CurvedLight

    Guitar To MIDI Recommendations

    Been doing the Guitar to Midi for 15+ years. I have owned and currently own* Roland GK2 and GK3 pickups *RMC piezo pickup to 13 pin connector built into a Brian Moore iguitar 8.13 *Jam Origin Midi Guitar 2 Software *Fishman Triple play Pickup Roland VG8, Roland VG99 guitar processors *Roland...
  21. CurvedLight

    SOLVED : Using an FC6 switch to momentarily turn on a flanger

    @chris - good catch - When I was using the dedicated switch it was Switch 3 that has the global Hold function
  22. CurvedLight

    SOLVED : Using an FC6 switch to momentarily turn on a flanger

    @Moke - Thanks for the screenshots and tip on using the higher PP# @chris - Thanks for the step by step explanation and screen shots and the heads up on using SW3 - I got it working using switch 1 - BIG THANKS !!!!!! Here is what I noticed between using the two methods discussed in this...
  23. CurvedLight

    SOLVED : Using an FC6 switch to momentarily turn on a flanger

    Leon - Thanks for helping ----I was able to get the Control switch method to work with my custom layout that I use for live playing. This makes it a more global configuration as I now have a button on the FC that can momentarily turn something on. I would still like to figure out if this can...
  24. CurvedLight

    SOLVED : Using an FC6 switch to momentarily turn on a flanger

    I would like to have a scene where the Flanger is bypassed and when I press and hold down a FC6 Button it enables the flanger until I release the FC Button. I would like to set this up as a Per Preset override for a particular preset. In my research the AFX3 manual mentions that the FC6 buttons...
  25. CurvedLight

    Axe-Fx III Firmware Release Version 14.03

    POTENTIAL PROBLEM .... I Installed 14.03 and all seemed well. after playing for an hour or so my all outputs were maxing out at full volume on all presets. When I switched to an empty preset all was fine. As soon as I went to any preset it came back. I had Axe Edit running. I even...
  26. CurvedLight

    Which firmware made you say WOW the most?

    I am not sure what the OP is really after. My guess is that he is trying to pinpoint " an earth shattering change that exist from one version to another". I don't think that will exists and here is my reasoning. I have owned my AxeFX3 since they came out and AxeFx IIXL before that. My...
  27. CurvedLight

    Anyone using a Gator G-PRO-4U-13 Pro Series Shallow Rack Case

    I have a short 4u gator rack similar to the one you are asking about one and love it In my top 1U space I have my Shure PGXD4 wireless receiver in the right side and a Atlas Power APS15HR Power Conditioner on the left It was one of the only 1/2 rack Power distribution units I could find and...
  28. CurvedLight

    What is your favorite factory preset?

    EJ Clean is my default sound when I first turn on my Axe FX - It is such a great clean tone. For gigging I use my own patches one for each song we play
  29. CurvedLight

    Riff Station alternative?

    RiffMaster Pro - for $35 works well
  30. CurvedLight

    dxr mk2 yamaha

    I Set the AFX Output one level knob at 12 o'clock and set the DXR10 anywhere from -3db to + 3db based on the room or venue. +3b for outdoors , around 0db for indoors and -3db for rehearsal (smaller room). Note: I have my DRX10 mounted on a tripod stand with the speaker hitting me at chest...
  31. CurvedLight

    dxr mk2 yamaha

    I use a dxr10 version 1 - I use input 1 XLR +4db on the dxr10 from XLR Output one on AFX3, it has plenty of headroom. Using a balanced mic cable had better noise rejection then line level 1/4 inch. IMO the DXR has great bang for the buck as an FRFR sulution for the AXF
  32. CurvedLight

    Vocal chain and Axe-Fx III

    I use the AFX3 to do the vocal processing for our band. Take the mixers FX send into AFX input 3 and create a Vocal FX chain for each song in its own preset using in3 and out3 . For songs that require vocal fx changes I use scenes to manage that. The AFX 3 output 3 stereo pair goes into the...
  33. CurvedLight

    Condensation under LCD Screen?

    UPDATE: I put 3 Silica Gel packets on my LCD panel over the spots and sealed it with painters tape and clear plastic wrap for 4 days. No change in appearance. It seems that it is not condensation but a leftover residue from the "hard Arizona water" that I was using in my humidifier. So I think...
  34. CurvedLight

    How do I adjust the SPDIF output level?

    I use the software mixer on my audio interface to mix the SPDIF signal from the AxFX and any other sound source from my PC (DAW, YouTube, Media player , iTunes etc). I first set the output level on my powered monitors to be a little too loud and use the software mixer to get a good mix. Then I...
  35. CurvedLight

    Condensation under LCD Screen?

    I do have a good hygrometer and my humidifier also has one built in. I was running it more towards 60% at first and since my room is on the small side and I realized that my Axe Fx was only a few feet away from the stream - so the damage was done early on. I have since moved things around and...
  36. CurvedLight

    Condensation under LCD Screen?

    I had my humidifier set between 40-45% in a 11x12 foot room. @MrGuitarabuse I assume the 70-80% humidity for where you live is outdoors, what is the typical humidity in the room you keep your axeFX in ?
  37. CurvedLight

    Condensation under LCD Screen?

    I live in Arizona and it was 105 today and it will be 111 this weekend. I have thought about putting it outside under the patio..... I wanted to see if anyone else has dealt with this first :) before exposing it to the AZ heat
  38. CurvedLight

    Condensation under LCD Screen?

    For the last little while I have had what appears to be condensation under my LCD screen. I believe it got there as a result of having a humidifier on in the room for my guitars. Has anyone else experienced this ? Any suggestions to get rid of it ? The unit works as expected but I would...
  39. CurvedLight

    FX-303 - Synth Tracking is Insane in fw12.08

    The synth clip reminded me of Jan Hammer's playing when he was on Jeff Becks album Wired. Nicely done @Admin M@
  40. CurvedLight

    Confined Bad Horsie

    How does that guitar stay in tune after all that Whammy abuse ?
  41. CurvedLight

    S/PDIF cable length for Axe-Fx III?

    There is a 15ft version of the cheaper cable that you asked about- That should do you just fine .......
  42. CurvedLight

    When You Turn ON Your AXE FX III

    EJ clean is one of my goto for general purposes, I also use a custom preset with clean and dirty amp scenes
  43. CurvedLight

    Rack Mounting Question

    So I looked at the Power Station specs, It has 3 tubes in it so it will generate some heat for sure and weights around 15lbs . Also it is not rack mount ready as is. You would need to mount it to a shelf or buy rack mount kit - I saw one for ~$90 (ouch). So how long will the stuff be on at...
  44. CurvedLight

    Great Music Movies To Stream?

    This is Spinal Tap the Wrecking Crew the other one - Bob Weir of the Dead
  45. CurvedLight

    What is your Favorite Factory Preset?

    EJ clean as well. Always go there first when I turn on the axe fx and start warming up
  46. CurvedLight

    A Nice Surprise

    Thanks you @Michael Pickens for adding the ability to resize Axe Edit 3 main window. As I was moving presets around for an upcoming gig, I noticed the arrow on the bottom right corner and presto - it resized the window ! . I guess I should read the release notes more often before installing...
  47. CurvedLight

    Axe-Edit III 1.05.03

    @Michael Pickens BIG THANK you for quickly fixing the issues with MANAGE presets functions. As a retired Software professional I appreciate the way you quickly address issues and add features at such a steady pace. I would be willing to be a Beta tester if you could use a more testers for Axe...
  48. CurvedLight

    New BOSS SY-1000. The Hex-pickup is not dead. Long live the 13-pin plug!

    Yes I am -- I will edit original post
  49. CurvedLight

    New BOSS SY-1000. The Hex-pickup is not dead. Long live the 13-pin plug!

    This thread was a very interesting read for me ..... I have been in and out of Midi Guitar/VG through the years .... 1990's .....Started with and Ibanez built Casio Guitar that had a 5 pin Midi Out on the guitar to drive a Emu Proteus late 90's - early 2000's Had a VG8/VG 99 / Gr30 using a GK2...
  50. CurvedLight

    Using Axe-Fx to send MIDI CC

    found this explanation of various midi pin outs --- in t he fractal WIKI http://wiki.fractalaudio.com/axefx2/index.php?title=FAMC_Liquid_Foot%2B#MIDI_IN%2E2FOUT_Pinout_Specs_for_5pin_and_7pin Looks like the extra 2 pins are for power - the 5 standard pins are the same on both. So as Unix-guy...
  51. CurvedLight

    Using Axe-Fx to send MIDI CC

    A quick google and this is part of the product description This Rocktron cable was created specifically to transfer MIDI commands between your MIDI pedals (with a 7-pin MIDI out jack) and any MIDI controllable rack gear. This MIDI cable gives you 30' of freedom. Rocktron MIDI cable comes with...
  52. CurvedLight

    Cloning the Eventide H9 and beyond. Chapter 1: Crystals Algorithm

    If you guys keep this up I may wind up selling my H9 Max after all :) ... Its one of the few pedals that I still have left after switching to Fractal 2+ years ago. Oh ...This reminds me...... its time to wipe the dust off my Mesa Boogie V:25 amp and cab along with my shrinking pedal board
  53. CurvedLight

    How to program MIDI changes

    Have you actually got it to work over USB? I have tried the opposite over USB that is axe fx midi block out to laptop midi in over USB but that is not supported.
  54. CurvedLight

    How to program MIDI changes

    You will have to hook up a 5 pin Midi cable from your laptop to the Midi IN port of the AXE FX Look at Chapter 12 of the User Manual "Midi/Remote Menu" for how to configure your Axe FX to receive Midi from your DAW Look at Chapter 15 of the user manual "MIDI Reference Tables" and CC value to...
  55. CurvedLight

    Wish Option to save Looper recording to PC as a WAV file

    Yes I can do that - but I guess I was being a bit lazy and just wanted to get it with a click in Axe Edit :)
  56. CurvedLight

    Wish Option to save Looper recording to PC as a WAV file

    I was just jamming with the looper and came up with a nice hook for a song. I would have liked to save the loopers's recorded content to a WAV file on my PC. This would be a nice feature . Please consider adding it to Axe Edit
  57. CurvedLight

    AxeFX 3 ad in latest Guitar Player Magazine

    I got the latest Guitar Player Magazine in the mail today and was pleasantly surprised to see a full page ad by Fractal Audio for the AxeFX 3 for only $1999. In the almost 3 years as Fractal customer I think this is the first print ad that I have seen in a guitar magazine. (I kind of got...
  58. CurvedLight

    Looper and Changing Presets

    Just get a used ditto looper for about $60. and your problem is solved
  59. CurvedLight

    AFIII Black Sabbath's "Sabbath Bloody Sabbath" Live

    I said this on your Facebook post but it's worth repeating here as well.... A most Awesome AF3 patch !!! - Nailed all of the songs tones. I especially liked the - mellow interludes towards the begging of the song. Well done and well Played !
  60. CurvedLight

    Input always clipping

    Its Pretty Awesome that The chief designer and implementer of the product you have invested in (not to mention the head honcho) Diagnoses a hardware issue in less then 20 minutes after a NEW customer asks for help on this forum. Sleeper Studios - welcome to the Fractal Family and world...
  61. CurvedLight

    Axe-Fx III Firmware Version 6.03

    The level of customer service from Cliff and the entire Fractal Team never ceases to amaze me. Bug fixes in less then 24 hours ! Thanks again to the FAS team as well as the forum members that help debug and identify issues. As a retired software engineer, manager and project leader I...
  62. CurvedLight

    Hope the FC's get some update love soon....

    @black - I use my AxeFX and FC6 just as you described .... My workaround for copying scenes out side of presets is as follows: 1. I standardized the layout of all my presets as best as possible 2. I created TEMPLATE Presets that gets me 80-90% there as far as blocks /layout goes 3. I use the...
  63. CurvedLight

    Axe-Fx III Firmware Version 5.00 Beta #3

    I just install Beta 3 - FYI: Skull Crusher is alive and well here . Shows up on amp list in Axe Edit and is in my preset as well @Diezeljammer if using Axe Edit try SETTINGS-> Refresh after new FW
  64. CurvedLight

    Using Midi Block over USB?

    @vangrieg - Thanks for the heads up ! - adding my vote to the wish list as well
  65. CurvedLight

    Wish Ability to route MIDI to/from USB

    adding my vote +1
  66. CurvedLight

    Using Midi Block over USB?

    To close this out. I have confirmed via experimentation that the MIDI Block Only sends data over the HW Midi ports and NOT over USB. So one has to use a midi cable and a Midi to USB dongle to send AxeFx Midi Block Messages to a PC that is connected to the AxeFx via USB for control/audio
  67. CurvedLight

    Using Midi Block over USB?

    After further experimentation ...... After connecting the AxeFx midi Out to my PCs Midi In via a midi cable I am able to see the Midi Block transmit Midi PC/CC messages as expected. I was hoping these messages were "echoed" via the AxeFx USB Midi in. This would allow me to route the PC/CC...
  68. CurvedLight

    Using Midi Block over USB?

    I have been trying to get the Midi Block to Send PC/CC messages over the USB Midi interface. I do not see any data coming across using a Midi Utilities software monitor, I am seeing constant SysEx messages being sent . Questions : - Can the PC/CC messages be sent over USB Midi ? - Is it...
  69. CurvedLight

    Axe-Fx III Firmware Version 5.00 Beta

    I normally wait for the final release but with all of the positive chatter I could not wait. - I was glad I checked it out. I have been carefully tweaking my ~25 presets I use for my cover band as each recent update has come out . I use a variety of amp/cab combos for these patches. After...
  70. CurvedLight

    Axe-Fx III Firmware Version 4.03

    Maybe a more appropriate image would be of a "DEAD Bug " :) Cliff thanks for working into the evening to squash some bugs and get this release out
  71. CurvedLight

    Axe-Edit III 1.01.01

    That was my experience last night as well.
  72. CurvedLight

    Axe-Edit III 1.01.01

    @Rex I was Asking "IF" it needs to be done ---- If it is Yes then the answer to WHEN would of course it will be "soon " :)
  73. CurvedLight

    Shout Out To Burgs!

    @Burgs - Just want to also add my thanks and appreciation for all of your videos - been a subscriber to you YouTube channel for many months. Also thanks for sharing your AxeFx patches as well !
  74. CurvedLight

    Axe-Edit III 1.01.01

    @Michael Pickens - will AxeEdit need to be updated for Firmware 4.01 ? By the way - Thanks for all of your hard work. Great job of keeping up with Cliff !
  75. CurvedLight

    Axe-Fx III Firmware Version 4.01

    Spent the last weekend tweaking my cover patches for 3.02 and playing with the new drives. Loading 4.01 and ready to go through them again and play with the new features. I have a feeling it will be a late evening :) The sound out of the AxeFx 3 keeps getting better and better - I am so happy...
  76. CurvedLight

    Axe-Fx III Firmware Version 4.00 Beta

    Cliff I am impressed and amazed by your commitment to continuous improvement. You have definitely been in the coding zone lately. Thank you for never being one to rest on his laurels and be content with an already great product.
  77. CurvedLight

    Is this normal?

    The axe fx is basicly a computer running a real time operating system. What you are seeing is the OS booting up. Each line of text is a status message . This is normal for computers and especially common in embedded systems as it it is used for diagnostic purposes.
  78. CurvedLight

    FW 3.02 impressions (drives and 'authentic' controls)

    Welcome to the Fractal Audio Update Treadmill :) Cliff and team are CONSTANTLY making the "latest and greatest " units even GREATER ... They are generous enough to back-port significant features to previous versions of the platform from time to time when feasible. You are going to get...
  79. CurvedLight

    WISH: Execute a 2nd Function per switch- RESOLVED

    I accomplished this by customizing my scenes page by assigning the following hold functions Preset +1 preset -1 Tuner To the top 3 button on my fc6 The bottom 3 button are my most common scenes, if a preset needs more than 3 I will also use the top row as well. This is how I plan to do...
  80. CurvedLight

    Jumped on the Wait List

    I think you just convinced me to keep my mark v:25 even though it hardly gets used since owning an axe fx
  81. CurvedLight

    Wish: Use FC switch to increment/decrement Cab number for auditioning cabs

    @Moke - Great suggestion, I got it to work with 2 simple foot switches connected to my MIDI EXPRESSION converter and using the Bome's Midi Translator Classic. I translate one switch/CC with an UP keystroke followed by enter key and the other switch/CC with a DOWN/Enter combo. I can use it to...
  82. CurvedLight

    Portable Stand or Table

    I use a folding table I found on Amazon. It is sturdier then it looks in the picture . My Yamaha DXR10 fits nicely underneath.
  83. CurvedLight

    Wish: Use FC switch to increment/decrement Cab number for auditioning cabs

    @Moke - yeah I use that method when dialing in FX choices and parameters. I also use it for AMP and CAB settings but for trying to get a "feel" for a amp/cab dynamics response at higher volumes it is better to be playing. The above feature would provide hands free A/B ing while playing ....
  84. CurvedLight

    Wish: Use FC switch to increment/decrement Cab number for auditioning cabs

    As I am playing with my FC6- I thought that it would be handy to allow for hands free auditioning of CAB IRs if we could assign a switch to change CAB1 Slot1 IR slot value with a onc/dec command from an FC switch. This could also be handy for selecting amp types or other things while creating...
  85. CurvedLight

    [implemented] Preset level VU meters visible from Axe-Edit main screen

    +1 to adding the meters to the top of the axe edit window - or have the ability to open the meters in another standalone window
  86. CurvedLight

    [not a bug] FC-6 tuner pitch doesn't match Axe-Fx display

    Just wondering out loud here .... FC has no flat sign in its display character set.... A lowercase B "b" is the "flat sign. I believe the display can show lower case Alpha characters. I am missing something here ???? - thanks - again just wondering out loud :)
  87. CurvedLight

    Recommend a tiny Full-Range powered speaker for Axe-Fx 3

    +1 for the IK Multimedia iLoud micro monitors - I got them for my laptop recording rig and they sound great - I got them a year ago for a steal $99 as sam ash sent an add with the wrong price they were supposed to be on sale for $199 and normal price is $299. I called Sam Ash and got them to...
  88. CurvedLight

    Carrying Case recommendations for FC6 + 1 expression pedal?

    Getting my FC6 next week and was wondering what you guys are using to transport it back and forth to rehearsals and gigs by car ? Would like to put the FC6 and an expression pedal and maybe the XLR cable as well in a zippered case - any body find something that works ?
  89. CurvedLight

    Wound up going with FC6 over the 12 and am pleasantly surprised

    I am really glad that you all are praising the FC6 capabilities --- I got an invite to purchase one yesterday and hesitated for a few hours - then I finally pulled the trigger. It shipped today and I will get it next week.
  90. CurvedLight

    Best patch for VG-8

    Chris - I was just joking around - I did this with a big smile on my face as I am a former PROG SNOB :) -- not trying to bust your chops or be a naysayer. In hindsight I should have added a smiley face or 2 on that post. Sorry if I came across as a wise ass -- that was not my intention.
  91. CurvedLight

    Best patch for VG-8

    I bet Eddie Jobson is using one in this video .... and maybe a an FX processor or 2
  92. CurvedLight

    Best patch for VG-8

    As a former owner of both the VG99 and VG-8Ex (my first modeler back in the very late 1990s) it is cool to see that people are still finding uses for those cool devices of yesteryear. I listened a bit to your track and as I have been playing with the AxeFx Synth Blocks lately ( covering the...
  93. CurvedLight

    FW 3.0 - Testing the New Reverbs & Short Tune

    Shortly after getting my AxeFX III I sold my secondary Eventide H9. After listening to the new reverbs and plex delays I am wondering how much longer I will be holding on to my H9 Max......
  94. CurvedLight

    Maroon 5 Axe-Fx III Awesomeness

    WOW - that is very Generous of James Valentine to share with the community
  95. CurvedLight

    Amp reset

    this was just discussed on a previous thread https://forum.fractalaudio.com/threads/best-known-method-when-resetting-amp-block-on-existing-patches.147055/
  96. CurvedLight

    Wish Table view

    +1 as well
  97. CurvedLight

    Firmware 3.0 Beta - Output volume drop ?

    Having experience in DSP and embedded systems update methodologies and knowing that Cliff is extremely through, I expected the update process would be bullet proof with multiple checks to ensure successful updates. Cliff thanks for taking the time to explain it. For the record, I waited...
  98. CurvedLight

    Best Known Method when resetting AMP Block on existing patches ?

    OK - This makes so much sense --- I was under the MISCONCEPTION that resetting the block ensured that the NEW DSP code was activated. But from what you explained the NEW DSP code is running with my current settings and the RESETTING loads the latest default settings. I was focusing ON...
  99. CurvedLight

    Best Known Method when resetting AMP Block on existing patches ?

    As I am kicking the tires on FW 3.0 Beta and want to reset the AMP blocks on about 25 of my custom patches so I can take full advantage of the "improved amp modeling". I came up with the following process using Axe EDIT 1. Select Patch 2. Select Amp Block 3. Save amp block in the block...
Back
Top Bottom