Search results for query: *

  1. komorebi_dayo

    Germanium boost pedal?

    the SDD preamp type also works a treat for this
  2. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    Justin, thank you so much for everything you do <3 Just placed my order and installed Cab Lab 4. Incredibly excited to try these with the 25.00 beta that just dropped
  3. komorebi_dayo

    D Style SSS

    absolutely
  4. komorebi_dayo

    Axe-Fx III Firmware 24.04 Release

    D60 Less is an utter delight for low to mid gain tones. cleans up like a dream too
  5. komorebi_dayo

    Axe-Fx III Firmware 23.05 Release

    brief off topic pivot but rest easy Andre Braugher. legend of the game 💙
  6. komorebi_dayo

    Cab preamp settings?

    modern is also fantastic for clean bass and dumble adjacent cleans on guitar. huge low end presence on that guy. same hat as kyle but i run saturation at 0.5
  7. komorebi_dayo

    Axe-Fx III Firmware 23.03 Beta #1

    brit 800 2203 is my new favorite amp model
  8. komorebi_dayo

    Axe-Fx III Firmware 23.03 Beta #1

    greis i thought your joke was funny. keep it up and disregard your haters
  9. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    Shure KSM313 and AEA N22
  10. komorebi_dayo

    Axe-Fx III Firmware 22.00 Release

    bassist weighing in to say that hartke 2x10 cab is dynamite!! try it with the tucana clean, ribbon, position 4 distance 4, and then mix in a condenser at -13db same position/distance. it even sounds killer on some clean/eob guitar tones
  11. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    still absolutely head over heels for kw412
  12. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    just played this out today on bass. the fullness in the low mids is stunning!! of course it's not as present below 80hz as a bass cab would be but honestly that was not an issue because it sits perfectly in the mix. the voicing is both clear and full bodied; i hear my note choices and...
  13. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    okay okay y'all have gottaaaa check the 313 captures. i'm such a fangirl for the 313 historically but on this pack they're just completely unreal. they're all superb but 313-2 and -4 are my current favorites as darker/brighter counterparts
  14. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    Justin this is awesome!! Just picked up the new library, great to see you've upgraded your toolchain as well. Gonna be trying it on bass at rehearsal this coming week 💙
  15. komorebi_dayo

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    this fixed it! thanks for the suggestion
  16. komorebi_dayo

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    no dice unfortunately
  17. komorebi_dayo

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    currently getting a blank context menu with a checkmark up top when i open the cabinet options in dyna-cab mode. followed the opening post's instructions to the letter, axe-edit and fractal-bot are both updated. any ideas?
  18. komorebi_dayo

    Axe-Fx Firmware Version 21.04

    from 21.02 notes
  19. komorebi_dayo

    Axe-Fx Firmware Version 21.02

    seconded wholeheartedly 💖 using the jfet sustainer up front and the optical compressor set to el foil after the amps on my bass patch. absolutely the best it's ever sounded at rehearsal tonight
  20. komorebi_dayo

    Keef: Villa Nellcôte.

    youtube complimenting the modeling + preset in the most antagonistic way possible lol sounds great brett 💖
  21. komorebi_dayo

    Gift of Tone #6: MIKKO LOGREN

    came here to ask this monet kiitokset Mikko 💖
  22. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    in no particular order, any of these would be incredible additions to the catalog: https://acmebass.com/speaker-cabinets/the-low-b-2/ (have owned and gigged this one in the past and it's a total beast) https://www.aguilaramp.com/cabinet-series/db-series-cabinets-2/ (2x12 or 4x10)...
  23. komorebi_dayo

    Axe-Fx Firmware Version 21.00

    yes it's just the updated values for the amp block
  24. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    can confirm!! i use rnr-1 and 313-1 panned 50% left and 50% right respectively at church and my tone has never sounded so satisfying and consistently on the mark actually a decent time to ask since i don't like to add to the pile apropos of nothing: any plans for future bass cabs? would love to...
  25. komorebi_dayo

    Genelec 8030c with Neural DSP

    i'd say this is maybe a better fit in "rigs & routing" but i'm not even sure what the intent of the post is lol
  26. komorebi_dayo

    Prs archon mini game : helix or axe ? (With results page 3)

    the codec yt uses, opus (aac for apple devices), is actually the same bitrate from 360p all the way up to 2160p and is functionally transparent across the vast majority of cases. the lower bitrate encodes are for 144p and 240p all this to say you're probably not hearing something that is...
  27. komorebi_dayo

    Axe-Fx Firmware Version 21.00

    should refresh automatically if axe-edit never read a version 21 string
  28. komorebi_dayo

    Axe-Fx Firmware Version 21.00

    the amp block's values will automatically update to the new defaults on load so retweaking will be necessary and is honestly best practice anyway unless you absolutely need your presets to sound the same for a project or something edit: for clarity, if you need your old preset sound for a...
  29. komorebi_dayo

    Axe-Fx Firmware Version 21.00

    was thinking you might be excited :D you get to make videos on fw21 for g66 now
  30. komorebi_dayo

    Axe-Fx Firmware Version 21.00

    there were mistakes when Cliff originally modeled it that some folks liked and wanted kept as a separate FAS model, but the final version ended up being the corrected one that is faithful to the amp itself
  31. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    makes sense, thanks! the flashing screen does appear to be a bug though
  32. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    bug: when i scroll through presets using the front panel, i get stuck on several in a row telling me that i have unsaved changes and cannot proceed until i store them. also possibly related the screen will sometimes blink rapidly upon storing a preset
  33. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    the n22 and 313 captures on both mv30a and mv30b absolutely rip panned -50 and 50 respectively, even on clean tones 😳
  34. komorebi_dayo

    Rumblin' Teles. Free ODS-based preset and video demo for Tele and similar twangmeisters.

    burgs as always you are such an awesome member of this community. thanks so much for all the time, tools, and music you share with us 💙✨
  35. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    they wrote 20.04, which did not use the new modeling paradigm. are we reading the same text?
  36. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    nah, the low end is different because cygnus x-2 calculates the circuit differently and not because of speaker drive i'd maybe try a lower transformer lf value in the amp block speaker tab, lowering the low cut input eq, adding a dynamic distortion block set to bass boost, or some combination...
  37. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Release Candidate (Beta 7)

    i think this is expected behavior as fractal bot also relies on compute resources to send the file. if resources are limited by multitasking the upload thread will slow down
  38. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    just taking a moment to say lots of love for you and your family as always Justin <3 grateful for everything you do for the community, and as long as you're having fun with your craft that's worth its weight in gold from where i sit
  39. komorebi_dayo

    Master Kitchen Sink - best 4 options - versatility. GO!

    Optical (EL Foil), JFET, and Studio FB 1 all see regular use from me. All types work at instrument level before the amp but Optical works well in either Instrument or Line position. On bass and rhythm guitar tones try it with blend around 60%, fast attack ~0.4ms, release ~140ms, compression 4.3...
  40. komorebi_dayo

    Cygnus X-2: No More Low Cuts Needed Here

    it feels like a culmination of over fifteen years of earnest efforts to wrangle the mysteries of tube amps into the digital realm. this revision seems like the hardest work is in the books, and now it's just a matter of fixes for small model-specific issues and continuing work on the UI and...
  41. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta #4 (Beta 4)

    pretty sure that's gonna be different for everyone depending on what you're playing through and the levels you need. around 60% gives me good headroom for my church's p.a. but my headphones only need about 5% to get a strong signal and that will vary based on the resistive load of your headphones
  42. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta #4 (Beta 4)

    almost every time i dial up a model i go for the depth knob and bright capacitance on the ideal page, another vote for leaving it if it's at all possible to rework it into less of a headache
  43. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    @Burgs laying it down on some 21b mesa models
  44. komorebi_dayo

    Your best drive block to turn a clean amp into a dirty Marshall ?

    +1 for Suhr Riot LED/Si. Compulsion Distortion HP should also work great
  45. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    i'm among the brave souls who've done this. no stability issues to report, worked like a charm and sounded like a dream
  46. komorebi_dayo

    Remembering Ede Wright

    all the best for Ede's family and close friends in moving through this time of grief. what a gift that he shared his presence and music with the community
  47. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    bassist checking in! installed right before church today and didn't have to make a single change to my dual amp ods100 clean/portabass patch. my dynamics sounded crystal clear, small changes on the instrument volume responded just as i would expect real amps to respond, and the resonance on each...
  48. komorebi_dayo

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    https://www.tutorialspoint.com/magnetic-hysteresis-including-b-h-curve-importance-of-hysteresis-loop "The B-H curve or magnetisation curve is the graph plotted between magnetic flux density (B) and magnetising force (H). The B-H curve indicates the manner in which the magnetic flux density...
  49. komorebi_dayo

    Best off drive pedal!

    obligatory tone of kings and heartpedal 11 shoutouts
  50. komorebi_dayo

    Anyone else bounce back and forth between pre and post Cygnus firmwares?

    one of the things Cliff mentioned was that if you liked your pre-Cygnus tones then lowering bias excursion is a good first move to make, since earlier fw had lower blocking distortion on avg from grid bias. try that as a starting point? everything else being modeled better should be a boon to...
  51. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    seconding this, including the no expectations sentiment
  52. komorebi_dayo

    Axe-Fx III Manual Update 20.x

    cheers Matt. i'm actually still unclear how you would go about processing audio coming in from USB with the DSP before it goes to the headphone out, would this be worth including in the manual as well? even with an empty preset you still get USB audio in passed to headphone out and it's not...
  53. komorebi_dayo

    Axe-Fx III Firmware Version 20.00

    the release notes are in line with my experience of it; there's some kind of touch responsiveness + sweetning that it imparts. even around 1.4 you can clearly feel it with dynamic passages. it also smooths out some rasp when you dig into a model set to edge of breakup, e.g. Carol Ann OD-2 or...
  54. komorebi_dayo

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    there's no mix parameter on the dynamic distortion block but you can route a parallel dry signal around it
  55. komorebi_dayo

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    "ancient Chinese secret" = Cliff isn't inclined to say more about it
  56. komorebi_dayo

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    for real!! here's my strat bridge pickup with a tweaked factory preset 315 (Spandex & Hairspray) which uses the Big Hair model. I have Speaker Drive at ~1.4 and soft clipping Depth Boost Dynamic Distortion after the cab block
  57. komorebi_dayo

    IR sample rate for Axe3

    1) only Cliff can really answer this so I won't comment 2) the amount of process overhead from resampling is minimal (iow, if you watch the cpu monitor comparing a 96k file vs a 48k file you will not see a big difference in the average percentage represented). i've never heard artifacts from the...
  58. komorebi_dayo

    What IR sample rate do I import for Axe3?

    when the native sample rate is 96k the files are getting resampled one way or another, whether you do so in real time or bake it into the file is personal preference. the resampler in the box is reference quality and cpu overhead is minimal
  59. komorebi_dayo

    What is the biggest ‘lift” going from the FM3 to the Axe3

    https://forum.fractalaudio.com/threads/got-to-use-afiii-as-foh-hub-this-past-weekend.178787/
  60. komorebi_dayo

    Which model sounds similar to Mesa Electradyne?

    try the FAS Rhythm. it's conceived of as a "best of both worlds" model for mesa and marshall rhythm tones
  61. komorebi_dayo

    FB and FF Compressors, how you use them?

    in my experience feedforward is optimal for keeping levels as tight and controlled as possible (think limiting or compression-as-a-utility applications). moderately fast attack (1-4ms) and rms + peak detection mode should be good with most utility-oriented settings here feedback introduces more...
  62. komorebi_dayo

    Adding External Pedal before amps - best practice

    option 1 will allow you to make use of auto-z, which just means the front input will load down your pickups according to the first block in the signal path. there's no wrong way to do it though if you don't use the drive block and like how it sounds direct into the front end
  63. komorebi_dayo

    Axe FX3 Mkii additional gear?

    just this little guy on the front end for easy input level access and for that sweet parallel 1176 style compression before the a/d converter https://drybell.com/unit67-u-1/
  64. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.06

    can confirm this in axe edit as of 1.10.11 but don't currently have it home to test it on 1.11.01
  65. komorebi_dayo

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    hi Justin! just wanted to ask if there are any plans on the horizon to include a bass cab using the newer technique. i've been looking at the 410 HS pack and was thinking i might get it just for the RNR1 captures, but also wanted to check in. hope you and your family have been well 💝
  66. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.06

    gigged this tonight. couldn't be happier with how it sounded after some low cut tweaks on the od-2. it's a great confidence booster to know the models are that much closer now to the real world counterparts, likewise that we have tools to tweak them in ways that would never be possible on the...
  67. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.06

    just wrote a dual amp patch with the carol-ann od2 and porta-bass. sounds incredible on this firmware!! each model is a sweet complement to the other
  68. komorebi_dayo

    Wish More Carol Ann Amps

    caz-45 also has the distinction of being one of the only high gain cathode biased amps in existence, so the topology is undoubtedly unique among currently modeled amps
  69. komorebi_dayo

    Closest to Boss OS2, Sunn, Cave In?

    i have no experience with the os2 directly but after hearing clips i'd say try the mcmlxxxi drive, od 250 gray, or suhr riot led/si. for the sunn try the citrus rv50 or the porta-bass with an rv50 tone stack
  70. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.06 Public Beta

    is anyone hearing a difference/is this change perceptible?
  71. komorebi_dayo

    Does the Axe FX have the tools available to replicate this tone?

    this pedal is one of the key components of his driven tone. closest we have as of now is the transformer preamp type in the cab block: set drive medium-high (dependent on the level the cab block is seeing) and saturation around 1
  72. komorebi_dayo

    Favorite Fender Amps?

    stunning little class A model. haven't even tried the duomaster model, the fas one just gets me right where i want to be in the tonal ballpark
  73. komorebi_dayo

    "set your monitors to at least 94 db SPL C weighted at home"

    i'm sure the intended result is approximating the fletcher munson curve of live sound levels, but it's probably still worth mentioning that prolonged exposure to 94 db is a one way ticket to hearing loss
  74. komorebi_dayo

    Texture

    what sprint said, but one quick thing you could try is to notch out some pick scrape. filter or peq after the cab at 2.3k or a multiple (4.6, 9.2), -13 db, tight q setting
  75. komorebi_dayo

    Axe-Fx III Factory Presets Release 19.04

    157 - octaplex' garden you could probably play an entire ambient show on this preset alone with looped parts. absolutely gorgeous palette once you get the amp dialed in how you like it
  76. komorebi_dayo

    Anyone using Speaker Compression?

    fantastic use case tbh
  77. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    on the topic of the firmware: my dual chieftain patch sounded crystal clear tonight after i loaded 19.05. can't wait to get it home this sunday and hear the factory presets with these power amp improvements 🤩
  78. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    gotcha, trick of the light (or of possible interpretations). more precisely, "there hasn't been confirmation that any nonlinear parts of the signal chain will run CNFB, excepting power amp modeling which currently does."
  79. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    are we reading the same release notes differently? Version 19.00 firmware represents the first use of the Chase Nonlinear Feedback (CNFB) technique for the solution of nonlinear ODEs. The power amp algorithm has been completely rewritten using the CNFB method.
  80. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    CNFB? there hasn't been confirmation that anything other than power amp modeling will make use of it
  81. komorebi_dayo

    Mac Studio

    what do you think would be the timeline for this? so many apps are still written exclusively for x86 and once the qualcomm deal expires microsoft will probably make extensive use of rosetta for bootcamp
  82. komorebi_dayo

    My Personal trick to get 70s Sound

    i believe the case Cliff indicated in the past was not to run them in series when you're switching between them or bypassing one block part time. if you keep both on full time and you like how it sounds then that's probably fine
  83. komorebi_dayo

    My Personal trick to get 70s Sound

    i don't think running two power amp sims in series is considered best practice? (i.e., this is not representative of any real life signal chains and the blocks themselves aren't designed with this use in mind) i think it's fine if you turn supply sag to 0 in the first block though
  84. komorebi_dayo

    Axe FX III Factory Presets update

    install this https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/19p0/axefxiii_dsp_rel_19p05.zip then install the allbanks file from this https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/19p0/Axe-Fx-III-Factory-Presets-19p04.zip
  85. komorebi_dayo

    Axe FX III Factory Presets update

    update firmware first, then presets.
  86. komorebi_dayo

    FullRes: enjoying impulses from classic hardware effects

    https://forum.fractalaudio.com/threads/fullres-bricasti-m7-room-irs.177277/
  87. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    definitely. in my latest bass patch that uses dual Chieftains I found you can mitigate fizz by bringing up the low cut parameter, 55 hz seems to be my sweet spot. you can also lower bias excursion. pretty much my dream cathode biased sound, there for the asking with the tools Cliff gives us
  88. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    might be a function of CNFB improvements?
  89. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.05

    excited to hear/feel this next time I play
  90. komorebi_dayo

    tips for converting push pull power amp models to class A

    update: the chieftain suggestion was fantastic! i lowered the master volume on chieftain 2 to even out the boosted highs of that model compared to 1. i didn't export a preset tonight but here's a screenshot until i have it back home sunday
  91. komorebi_dayo

    Axe-Fx III Factory Presets Release 19.04

    https://forum.fractalaudio.com/threads/preview-axe-fx-iii-factory-presets-19-04.181974/page-2#post-2232502
  92. komorebi_dayo

    tips for converting push pull power amp models to class A

    gonna arrive early tomorrow to try these at rehearsal, yeah. i think postretro's insight about modeling data baked in + parameters not exposed to the user make this venture harder to justify and the chieftain seems like a solid option from this post referenced in the wiki...
  93. komorebi_dayo

    Axe-Fx III Factory Presets Release 19.04

    you can request individual presets and someone can export them for you (maybe better suited to dms depending on how many you'd want?)
  94. komorebi_dayo

    tips for converting push pull power amp models to class A

    currently I'm using a dual amp patch for playing bass at church: Two Stone J35 PAB + ODS 100 Ford PAB. on a whim I swapped the power tube types in each to EL84s and set negative feedback to 0 and I really enjoy the result. is there anything else that would need to be changed to properly simulate...
  95. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.03

    i know we say this collectively every time but it was already warp speed swapping before, this is just ludicrous now lmao
  96. komorebi_dayo

    Output IR for speaker/headphone correction

    bumping this one (thanks thread recommendation engine, ya done good ✨)
  97. komorebi_dayo

    Axe-Fx III Firmware Release Version 19.02 Public Beta

    youtube serves the same audio (160 kbps opus) at all quality options, even 144p, since 2019. it only serves lower quality audio if your network conditions are very poor (i.e., under 1 mbps) edit: it looks like they updated it so that 144p serves 70 kbps opus, so pick 240p or above and you're...
  98. komorebi_dayo

    Cygnus Gain

    shred mode on the JP2C is also essentially a tube screamer with more high end attack
  99. komorebi_dayo

    Boost pedal input 3 AD/DA level??

    red when it's on. 赤いライトはピークでのみ点灯するはずです。
  100. komorebi_dayo

    How to insert a preamp pedal in the chain?

    i think the worst you could do (without trying to do damage) is hard clip the input, at which point it should be obvious what's going on and you can adjust levels as needed
Back
Top Bottom