Search results for query: *

  1. Stobbart.hun

    Bug? Drive knob shows wrong values & Edited led always on

    Yes, I'am using the drive level attached to sceens creating virtual "channels" of the amp. Sometimes it shows the right value sometimes nothing or just one led. Luckily the sound is as it was set.
  2. Stobbart.hun

    Bug? Drive knob shows wrong values & Edited led always on

    I only saved the full bank but I guess it will do it (the ax8 is at the rehearsal room a district away at the moment). The exact preset is the very first one named "Firkin".
  3. Stobbart.hun

    AX8 Edit - Time Out - Block Definitions

    Well, you have a point there. :)
  4. Stobbart.hun

    Older FW versions available?

    Thank You :) Is there any chance of bad results installing an older fw over a newer one?
  5. Stobbart.hun

    AX8 Edit - Time Out - Block Definitions

    I tried to reboot the ax8 and the pc several times and connecting right after so no other programs were running but it's no use. I am also had the issue on a Mac and my Pc as well... The cable i am using is exactly 6 feet but I try to buy a shorter one. Strange that You mentioned that this is...
  6. Stobbart.hun

    Bug? Drive knob shows wrong values & Edited led always on

    Hi Chris :) I bought my device new about one and a half year ago. I installed the 9.04 FW today but the drive knob issue was the same with 9.03. Here I scroll though scenes (FS 1-2-3-4) and the Drive knob has the issue: Here I scroll though Presets and the "edited" led stays on:
  7. Stobbart.hun

    AX8 Edit - Time Out - Block Definitions

    Lucky You! If You manage to get through the "reading block definition" sequence once after a FW update You will never have that get_param_info tab again since the block data will remain at Your Pc and there is no need the read it in again. Unless if You plug into another Pc or install a new FW...
  8. Stobbart.hun

    Older FW versions available?

    Is there an official FAS site where I can download older FW versions to my AX8? I am having issues since the 9.04 FW installed. More on that: https://forum.fractalaudio.com/threads/ax8-edit-time-out-block-definitions.135304/
  9. Stobbart.hun

    Bug? Drive knob shows wrong values & Edited led always on

    I am having issues on the drive knob leds as they showing different values as I scroll through my scenes and go back again. Sometimes the right values than simply nothing than sometimes only the first led lights up. It's a bit frustrating but the sound is ok. Even if all the leds are off the...
  10. Stobbart.hun

    AX8 Edit - Time Out - Block Definitions

    Same here! Started a thread anno: https://forum.fractalaudio.com/threads/usb-connection-fail.131374/ It was "solved" back than but not with a repeatable method because as the major win10 update took place it just worked afterwards. Today after I installed the new 9.04 FW update it is the same...
  11. Stobbart.hun

    Bug? USB Connection Fail

    My connection issue is solved after the new win10 major update pack got installed. Unfortunately I can not suggest any solution for the MAC users due to that. It has to do something with the drivers because before the problem solving update came I was trying to change the settings of the...
  12. Stobbart.hun

    Bug? USB Connection Fail

    Thank You - I will definitely try this! God I just hope the solution will be that easy... :)
  13. Stobbart.hun

    Bug? USB Connection Fail

    Thank You for the tip! :) I have an integrated Intel HD but I will try to play with the visual settings next time I will be at the rehearsal room. It's good to know I am not the only one and there may be a software solution for this.
  14. Stobbart.hun

    Bug? USB Connection Fail

    Hi there! :) I have been emailing about this issue for a while with fractal support -and since the unit was purchased in EU- also with the G66.com tech guys... When ever I try to connect to a PC an error message appears saying: Communication time-out: AX8-Edit was unable to complete the...
  15. Stobbart.hun

    USA or China by serial number

    Oh, is that so? So if I have nothing written on the back that related to the assembly country than it is a USA built...
  16. Stobbart.hun

    USA or China by serial number

    Admin M@,Oct 27, 2016: "In an effort to reduce costs and improve availability, we have moved final assembly of this product to China." Is there a way that I can look up where my ax8 was put together according to the serial number on it?
  17. Stobbart.hun

    Another external tuner question

    I guess You don't use a wireless as they often have a dedicated tuner out if needed. I am not a big fan of line6's devices but the relay g50 that I use got me - it's just simply works and the sound remains as rich as if it was a cable. Otherwise use a splitter (as mentioned before). I know You...
  18. Stobbart.hun

    Wish Tuner for FX RTN, input pad per preset

    Thank You for the tip. My issue is that I would like to use 2 very different signal-strength guitar (but it has nothing to do with the input pad than). One is a prs 408 and the other is an acoustic guitar with carlos piezo in it. The acc. guitar signal is way to tiny for the ax8 even if I set...
  19. Stobbart.hun

    Wish Tuner for FX RTN, input pad per preset

    I would like to be able to use the tuner for the fx in too. The manual recommend the fx in as an alternative guitar input (with a different input pad if needed) which is great but it lacks the tuner which would be a must in live. I really like the tuner of the ax8 and would not prefer any...
  20. Stobbart.hun

    2nd amp block

    I see. Thanks for the FASt reply. :) Well it's up to the drive block than...
  21. Stobbart.hun

    Wish Separate FX in and FX out Block

    I would like to use the FX in as input at the beginning of a chain and still be able to send a separate FX out for the cab on stage while the main out is feeding the foh untouched.
  22. Stobbart.hun

    2nd amp block

    According to this chart (I can not post any links yet so had to put some "space" between the first letter): h ttp://axefxtutorials.com/2015/12/ax8-cpu-usage-of-all-blocks-types-fw-1-00/ the cpu usage of an amp block is only about 3% - so it dosen't seem like that the cpu lack is causing the...
  23. Stobbart.hun

    XLR or 1/4 to mixer?

    I just wrote to the official fractal support about the phantom+ AX8 issue. They simple answer was the following: "The AX8 is protected against phantom power."
  24. Stobbart.hun

    Show Us Your AX8 Rig! (post your pics)

    It was made by a Hungarian company called "Microsound" (I can not post links yet...) with their own tag "MS-Case". It was built with parts called "easy case" wich You can find on the net if needed. The mic stand is a K&M 22160 "Ceiling stand" wich was screwed to the floor plate and dose the job...
  25. Stobbart.hun

    Show Us Your AX8 Rig! (post your pics)

    Built in Mic stand on the floor, the lid becomes a guitar stand when removed. Orange micro terror as power amp for backline cab, Vein-tap's reversed "little splitter" for 2 separate inputs (one for the Line6 Relay G50 and one for cable). The XLR's and cab out is mounted at the back for easy...
  26. Stobbart.hun

    Level adjust and scenes

    - Use the output mixer level control (this setting is saved per scene) to get different levels per scene (as mentioned by blackmoreguiar) e.g. solo boost. - Use a modifier to the amp's imput gain to set different amount of it per scene. - Use stereo option at the cab section, pan each fully...
Back
Top Bottom