Search results for query: *

  1. Kaihoro1388

    Reamping With AxeFx2 Cubase

    this is how my project is set up with just one track which is the Dry recorded track. and i took pics with my phone of my project in cubase and sent them to my email in the smallest size and put them on my computer to send in this post and it says the file is too large which makes no sense
  2. Kaihoro1388

    Reamping With AxeFx2 Cubase

    thanks for the response! I'm using a saffire pro 40 from focus rite. when you say send the dry recorded track to usb channel of axe fx how do i do that exactly. like what vst connections do i have to set up? also, which do i use as my ASIO? Saffire or AxeFx?
  3. Kaihoro1388

    Reamping With AxeFx2 Cubase

    Hey guys i recorded a DI track and want to send it out of my Cubase 8.5 artist into my axefx unit presets and back into cubase to record. I posted this question on the gear page and tried someones suggestion and its a bit confusing and isn't working correctly. maybe i am doing something wrong...
  4. Kaihoro1388

    Recording Dry DI Axe-Fx 2

    Ok thanks I will try after work! When recording USB to computer do I use the interface as the driver or axe fx? And I notice the channels from the USB when I look in cubase say 1-front left 2-front right 3-center and 4-low frequency noises. So 3 and 4 are exactly the same dry signal as eachother?
  5. Kaihoro1388

    Recording Dry DI Axe-Fx 2

    Hey guys I'm using cubase 8.5 artist and i want to be able to record my di track from axe fx while still hearing the signal with the preset on. So basically when i record ill hear the preset I'm using but it will only record the dry track. I'm doing this so i can re amp the dry signal later. i...
  6. Kaihoro1388

    Midi Cables For MFC-101 original

    Awesome! Do you know where I can get one? Also, what's the difference from the 7 pin and 5 pin. I have both and not sure what to use
  7. Kaihoro1388

    Midi Cables For MFC-101 original

    Ok. I tried two different boss ac adapters and it didn't fit. I'm guessing the boss ones aren't 2.5mm?
  8. Kaihoro1388

    Midi Cables For MFC-101 original

    Is it an actual mfc wall wart or any brand wall wart? 7 pin is brand new from the site fractal recommends
  9. Kaihoro1388

    Midi Cables For MFC-101 original

    So i bought the 7pin midi cable for axe fx 2 and mfc 101 and after using it i realized it doesn't power the mfc. I also just got a 5pin midi cable in the mail. I also have the CAT5 cable. My questions are which ones are the best or preferred for live gigs and also studio use. And whats the...
  10. Kaihoro1388

    Scenes Still NOT WORKING CORRECTLY

    i have mfc original and axe fx 2. i have mfc edit and I've never done a backup of mfc with fractal bot
  11. Kaihoro1388

    Scenes Still NOT WORKING CORRECTLY

    ok thanks for the help. i can't open a ticket because i got it off ebay. i did a utility para reset and now i can actually switch from scene to scene and they communicate correctly with each other. however theres a big volume drop/gap when switching scenes that didn't happen when switching...
  12. Kaihoro1388

    Scenes Still NOT WORKING CORRECTLY

    This has been so frustrating recently. i have my presets 0-5 set up with a couple scenes each. when i go to preset 0 and hit button 2 on the mfc it says scene two on the mfc but no leds turn on and of to indicate different effects going on and off. it will say scene 3 if i hit button 3 on the...
  13. Kaihoro1388

    Scenes Not Working Correctly

    Ok sorry to bother you but i went into edit setup on the mfc and changed bank size to 1 instead of 5. I might have done something else but not sure. So now when i am at preset 000 i hit the increase button and it actually says on the mfc that I'm going up a scene to scene 2 but the LEDs on the...
  14. Kaihoro1388

    Scenes Not Working Correctly

    So i did what you suggested. All the settings were at offset 0. So i tried to use the mfc like i want it it still doesn't work. Ill explain it better. On my axe fx unit i have preset 0-5 set as 0- Intro/Nebula, 1- Radiance, 2- Manunkind, 3- Giants In Stasis, 4- Distant Origins, 5- Flourish in...
  15. Kaihoro1388

    Scenes Not Working Correctly

    So the 5pin will work for updates but will I be able to use it live without an ac adapter? What is everyone using for best live setup on mfc original axe II
  16. Kaihoro1388

    Scenes Not Working Correctly

    I'm pretty sure I have the latest firmware. I went to update my mfc to the latest firmware today in fractal not and it said I can't use Ethernet cable and need a midi. My 7pin midi doesn't fit in the IN of the mfc to the OUT of the axe unit. It only goes from the axe IN to the mfc OUT. So I...
  17. Kaihoro1388

    Scenes Not Working Correctly

    Axe Fx II Newest firmware (pretty sure) Original mfc-101 I got the mfc used on eBay. Then through axe edit I setup presets 0-5 with about 4 scenes each for live. I have mfc set up to sync.
  18. Kaihoro1388

    Scenes Not Working Correctly

    Okay great thanks for the response! I'm not home right now but I should be able to try that tonight. I will respond with the results, thanks again.
  19. Kaihoro1388

    Scenes Not Working Correctly

    So i set up presets 0-5 as song 1, song 2, ect.... in axe edit. all are how i want and need them. so i plug my mfc in and hit button 1. it shows the first song which is as preset 0. then i try to go to the next scene by pressing button 2. it switches the preset on the axe fx to preset 01 and...
  20. Kaihoro1388

    Latency while switching presets in song mode

    Nope just into my cab with a matrix poweramp
  21. Kaihoro1388

    Latency while switching presets in song mode

    so I have my song mode set up with dirty presets and clean with delay and reverb. When I switch from one to the other I get a long delay. Going from my Mesa rig with no latency to this axe fx2 with latency when switching is a huge bummer. Any help would be appreciated!!
  22. Kaihoro1388

    MFC 101 SONG MODE PROBLEM

    Hey guys i just recently got an AxeFx ll and an mfc101. I started using song mode and i put preset one as a clean channel and preset 2 as a dirty tone (all on song1). The problem happens when i try to go to preset 2 and so i step on the button labeled 2. It doesn't switch over to the dirty...
Back
Top Bottom