Search results for query: *

  1. D

    Friedman ASM-12 or ASM-10 - Which FRFR Should I Buy?

    I have an ASM12 and have nothing good to say about it. Keep in mind that it is just the electronics from a third party powered PA speaker jammed into an enclosure that sorta looks like a guitar cab. It does NOT color the sound like a guitar cab does. This is easy to prove by simply turning off...
  2. D

    The Weak Link

    I find this to be the issue 9 times out of 10. Drives, amps, compressors, etc. are hugely influenced by the level they get hit at. A quick fix is to throw in a Null Filter or Volume block all the way at the beginning of the chain and use that to boost or cut the input level coming from your...
  3. D

    Pitch Block...

    I find the pitch shift block on the AX8 works better when you use it to tune up a half step rather than down i.e. tune the guitar to Eb and shift up to E. I'm assuming this is because algorithmically it is a simpler and cleaner operation to go to a smaller (i.e. higher pitch) waveform than to...
  4. D

    Avoid Using a Volume Block (and CPU) but still have a working Volume Pedal - Here's How

    What happens here is both volume controls are now in effect. Putting the global volume on the output would still reduce the volume of delay and reverb trails regardless of where it is in the chain. Putting the global volume on the input and the volume block after a gainy amp will end up with a...
  5. D

    Using a 1/4" Line to USB Cable

    I don't see anything in the specs for that cable that indicates it has output capability (i.e. to plug your headphones into). It's typically desirable to be able to monitor through the same device that's doing the recording because DAWs tend to be designed to work best with a single audio device...
  6. D

    Has anyone gotten the Yamaha UD-BT01 working with the AX8 and Windows 10?

    I gave up a while ago. The SysEx issue I described above seemed to be buried in a component that I had no control over (e.g. the UD-BT01 device driver or whatever). I haven't tried again recently to see if there have been any updates that might've helped or made the process easier in general.
  7. D

    Cakewalk with AX8

    Just a wild guess based on this quote, but are you sending two program changes and expecting them to set preset and scene as a pair? If so, that's not how MIDI program changes work on the AX8. A single MIDI PC switches to a preset/scene combo. Take a look in the back of the manual and you'll...
  8. D

    Avoid Using a Volume Block (and CPU) but still have a working Volume Pedal - Here's How

    This only works if your happy with your volume being controlled either all the way at the beginning of the signal chain (similar result as a guitar volume knob like you said) or all the way at the end of the single chain (similar result as using the fader on a mixer or volume knob on a FRFR that...
  9. D

    Does Out 1 (Main) effect anything other than volume?

    If you are having a conversation with an electrical engineer about the internal implementation of the AX8, probably not but that level of rigor usually doesn't need to apply when talking among musicians. Not to get even more mired in the details but, as Rex brought up, things get hairy when you...
  10. D

    Does Out 1 (Main) effect anything other than volume?

    I don't understand what you are saying here. Do you acknowledge that "level" is something that can be measured in a multitude of spots in a signal chain? Well, if so, "gain" is simply the ratio of output to input between any combination of two of those points where the signal is meaningfully...
  11. D

    Does Out 1 (Main) effect anything other than volume?

    With all due respect, that is not correct. The concepts of "gain" and "unity gain" have very precious definitions that come from the discipline of electronics. The existence of electric guitars or the physical boundaries of devices like the AX8, mixers, etc. do not factor into these definitions.
  12. D

    Does Out 1 (Main) effect anything other than volume?

    Yes, there are standards governing this. You'd have to be familiar with your specific audio interface, DAW, etc. to ensure that the specific standards they use and their current configuration match. There are all sorts of variations in terms of peaks vs. RMS vs. hold time vs. offsets that can...
  13. D

    Does Out 1 (Main) effect anything other than volume?

    I can't speak for every single mixer in the world but, in my experience, if you set a channel fader and mains fader at the -0- line (not to be confused with 0 on any metering provided by the mixer) and use no EQ, compressor, etc. on the channel, then the line output of the mixer will be equal to...
  14. D

    Does Out 1 (Main) effect anything other than volume?

    I am not defining unity gain as two different things. The term "gain" and "unity gain" have very precise technical definitions in the field of electronics. "Gain" is quite simply the ratio of output level to input. "Unity" quite simply means a ratio of 1:1 i.e. the output level is identical to...
  15. D

    Does Out 1 (Main) effect anything other than volume?

    As far as I know, what you are referring to is true when referring to gain from the input of the piece of Fractal gear to the output but unity gain is measurable across different points in a signal chain. For something like the FX8 where you are using it to add effects between your guitar and...
  16. D

    Does Out 1 (Main) effect anything other than volume?

    Worth noting that this topic comes up all the time and what Chris says here is his opinion that some of us disagree with. The knob set to max is "unity gain" by what anyone reasonably means by "unity gain" when they ask about this i.e. if you imagine rewiring the AX8 to get rid of that knob...
  17. D

    [Video] Recommendations for the setting the Out 1 level

    My experience with this is that it isn't the noise from the AX8 that you have to worry about as much as noisy, old, junky mixers themselves that hiss like crazy when you have to crank the preamp gain up to compensate for a low level coming in.
  18. D

    [Video] Recommendations for the setting the Out 1 level

    Great video! Exactly the kind of stuff I've been trying to explain but a video demonstrates it so much better. This should be linked to any time the topic comes up.
  19. D

    Cover Band: Do you match the guitar tones?

    I try to find a happy middle ground. The way I look at it is that if I'm not playing in a tribute band, I want my own "personality" to come through and the band to have a unified sound throughout the show. A big part of that is having a consistent tone, set of effects, etc.. If you're in a...
  20. D

    Output 1 makes the mixer distort (turn red)

    Nah, it's because some of us have actually taken the time to run experiments and take measurements. I've measured the VU line on the AX8 at 100% at around -10dBV. Pull down to noon and it hits around -20dBV. Setting the output to around 9 o'clock means the VU line is around -36dBV on the...
  21. D

    Output 1 makes the mixer distort (turn red)

    My opinion based on almost a year and a half experience using the AX8 in a variety of situations and experimenting with it is that, in an ideal world, you should be able to set OUT 1 to 100% without causing any clipping. You can pull down OUT 1 to compensate but this means you are just working...
  22. D

    AX 8 Newbie Question

    The website is grossly out of date on that. The AX8 has been physically made in China for a long, long time. The engineering, firmware, software, etc. are still done in the US.
  23. D

    Line 6 HX Effects new for NAMM

    It has been a few years but my recollection from when I had an M13 was that it could take PC messages to change "scenes" which stores the current layout of effects, their settings, on/off states, etc.. If this new box has similar capabilities, it would sync well with the AX8's ability to send PC...
  24. D

    Line 6 HX Effects new for NAMM

    If this does MIDI, it seems like it could be a great companion to the AX8.
  25. D

    VST ideas for songwriting?

    I picked up Helix Native during the Black Friday sale and am so far underwhelmed. I've used it so far on my fully loaded Surface Book which I mainly use for songwriting -- not as powerful as my desktop home studio system but still pretty swank. I flip between TH3 and Bias depending on the tone I...
  26. D

    Acoustic Simulation Idea? Thoughts welcome

    I read an article recently (that of course I can't find now) that made the argument that acoustic simulation is difficult because an inherent part of the acoustic sound is how the brightness of an acoustic varies based on picking intensity more so than a typical electric. Since IRs are linear...
  27. D

    Vai Academy 2018

    Thanks for the detailed write-up but no thanks for potentially costing me money on one of these! ;) Seems like the key to enjoying these events is to understand that it is about the overall experience and not the time and potential interactions with the headliner.
  28. D

    Vai Academy 2018

    I can't seem to find where I read it but my recollection is that he had that guitar made for the Jimi Hendrix Experience tour based on a similarly painted strat that Jimi had. It's tuned down a whole step and he ended up using it for Gravity Storm because the lower tuning made the strings...
  29. D

    Vai Academy 2018

    Gravity Storm. That's the guitar he uses for the low tuning for that song.
  30. D

    Small "Pro" Mixer for Home use

    Also worth noting that most (if not all?) of the delay types can be set to "dual" config with gives you two delays with one block.
  31. D

    Small "Pro" Mixer for Home use

    Reading through this thread, I believe you have a combination of issues going on with clipping likely being introduced both on the AX8 and mixer side. I just put your preset on my AX8 and it easily clips internally if I just chug away on some palm muted power chords. According to the VU meter...
  32. D

    Piezo Pickup What amps sound best?

    He specifically said "no cab" so I'm going to assume he's in the wrong forum.
  33. D

    Piezo Pickup What amps sound best?

    Maybe I'm misunderstanding your point but the AX8 doesn't have a Tone Match block.
  34. D

    Piezo Pickup What amps sound best?

    That is true and worth emphasizing. As soon as you add the FX Loop block to a preset, the global Output 2 setting is ignored and Output 2 cuts off even if you don't have anything hooked up to the input of the block. It can be a nasty surprise if you set up a preset like this at home without a...
  35. D

    Piezo Pickup What amps sound best?

    Another nice thing you can do with piezo (if your guitar lets you split piezo and mags) is run it into the FX return jack and then use the FX Loop block to insert it a preset. That allows you to have your conventional electric guitar amp/cab chain in the same preset with the piezo chain so you...
  36. D

    IR vs parametric EQ

    Fractal's "Normal" resolution IR is 1024-points across the frequency spectrum. I believe the GEQ block tops out at 10 bands and the PEQ at 5. You aren't going to get nearly the same result using an EQ block instead of an IR. The IR also captures phase response that you wouldn't be able to...
  37. D

    The most convenient wireless system to use with the AX8?

    I have mine on a pedalboard along with the AX8, expression pedals, etc.. I would not characterize the construction as sturdy and suspect it wouldn't last long unprotected on a stage floor.
  38. D

    The most convenient wireless system to use with the AX8?

    A picture wouldn't help much because it's all buried under tape. All I did was buy a new micro USB cable for it with the connector at an angle (paid maybe $5 for the cable). The one that comes with the G10 has a connector that sticks straight out so it is not well protected from bumps and the...
  39. D

    The most convenient wireless system to use with the AX8?

    The connector is pure garbage. What I did was buy a right-angle connector and then gaff tape the heck out of it. This connection is absolutely necessary for powering the receiver and the system won't work without it. To recharge the receiver without having to drag around my entire pedal board...
  40. D

    Are there any FRFR solutions out there that can compete with a 2x12 + power amp?

    Keep in mind that the ASM-12 and ASC-12 are both 1x12.
  41. D

    4CM and stereo, possible?

    Glad it worked out so well! If you haven't tried it yet, another fun thing to do is put an amp block in parallel with the fx loop so you can blend a modeled amp with your real world amp.
  42. D

    4CM and stereo, possible?

    If I'm following what you want (i.e. amp head is only used for preamp section), this should work: Cable 1: Guitar -> Axe-Fx Input Cable 2: Axe-Fx fx Send L -> Amp Input Cable 3: Amp fx Send -> Axe-Fx fx Return L Cable 4/5: Axe-Fx Out L/R -> Power Amp L/R -> Cabs The idea here is: 1. Plug guitar...
  43. D

    Bug? Looper out of sync after switching presets

    I reported this over a year ago and it still hasn't been fixed so I wouldn't hold my breath. I agree with you that it seems like a simple workaround to just advance the sample offset by the gap but I guess improvements like this aren't on the road map.
  44. D

    AX8 Through ASM12 Vs Through the PA

    Where is the signal coming from for the ASM12? First step would be to make sure that nothing is clipping on the ASM12 signal path. Make sure that the MAIN OUT CLIP and FX SEND OUT lights on the AX8 never light up and that red LIMIT light on the back of the ASM12 never lights up. If you...
  45. D

    Do you use amp knobs on your AX8?

    I pretty much completely forget they exist until I suddenly remember after I've already dug through the screens that I could've just changed it with a knob. Been trying to remember the level knob at least since that's really useful for trying to get the level of a preset right on the fly. I...
  46. D

    Wish Global Boost

    The global volume adjustments only allow for cutting so that would not be useful for boosting input level as the original poster described (unless you edited every preset to add an upfront boost for the global level to pull back but that defeats the purpose of a convenient global adjustment).
  47. D

    what are the best cab packs to buy for AX8?

    I love the ML packs (I have Cab Packs 7 and 13, I think). They just sound fuller, clearer, and more "3D" than either the factory cabs or the random free IRs I've played around with. One catch is that I'm coming from using the real world cab and mic combos that these model so I may just be used...
  48. D

    FRIEDMAN ASM-12, EV ZLX-12P

    I agree on the ASM-12 awkwardness. I regret that purchase largely because of how much of a hassle it is to transport and I say this as someone coming from carrying around Mesa Mark series 1x12 combos and Recto 2x12 cabs.
  49. D

    That sucked

    Something that I don't think has been mentioned yet that can be helpful in situations like this is the AX8's global EQ. Go to SETUP > GLOBAL and page over until you get to it. You probably won't have time to get it perfect at a blues jam but at least it let's you make some quick fixes.
  50. D

    I was looking for a cheap alternative to ax8 for traveling

    You can get something like an IK iRig adapter for a phone or tablet and then use the included app or any of the long list of amp sim apps (like BIAS which has really deep amp tweakability). Hard to beat the convenience since the adapter is pocket-sized and doesn't doesn't require power and you...
  51. D

    HSS

    As far as I know, the AX8 doesn't have the ability to quickly toggle on a global EQ/boost that stays sticky between scene and preset changes so if you use a block for this, you lose that state as soon as you switch the scene or preset. This is okay for a lead boost but not so great if you are...
  52. D

    Bug? AX8-Edit silently fails on presets newer than firmware

    And I agree that it could just be a user "education scenario". That's why I'm suggesting a simple popup to educate the user.
  53. D

    Bug? AX8-Edit silently fails on presets newer than firmware

    Again, I'm talking about cases where the user doesn't know the firmware version. I'm specifically suggesting that AX8-Edit tells the user the preset's firmware version (or at least vaguely that it is too new) so that the user can take a level of responsibility at that point. The user can't be...
  54. D

    Bug? AX8-Edit silently fails on presets newer than firmware

    The whole point is that the user doesn't know it is a newer firmware preset. That's why I added this part: Personally, I keep up with the news on the latest firmware and have encountered this enough to understand what it means but from a general user-friendliness standpoint, a popup saying...
  55. D

    Bug? AX8-Edit silently fails on presets newer than firmware

    Starting around the time when 7.01 came out, I noticed that some of the presets that others have shared would not load. I'd attempt to load the preset into a blank preset and AX8-Edit would do some work followed by leaving the preset blank with no message regarding failure. I'm typically slow...
  56. D

    Fremen AX8 presets released

    Are these going to be available as a free update for past buyers or would we have to purchase again to get the updated versions?
  57. D

    ax8 questions

    One word of caution when picking any block for level control is to avoid the Reverb block for this. The AX8 will disable the Reverb block when CPU usage gets too high and any level adjustment will be lost when this happens. Depending on how you are using the level control, this can range from...
  58. D

    Wireless without a pedal board?

    How about something like this? C2G / Cables To Go 29810 16 AWG 1-to-2 Power Cord Splitter (1.5 Feet, Black) on Amazon (I can't post links).
  59. D

    About to buy...audio gap question?

    Lolz. Nice troll. I'd say that you have that exactly backwards and it's the newbs playing alone in their bedrooms who aren't bothered by the gap because they aren't working with other musicians, don't have an audience listening to them, and have never experienced the real amps that are modeled...
  60. D

    Fremen AX8 presets released

    Good to see that these are getting updated! I personally would not update a critical piece of gear to a beta version and usually wait at least a few days (if not longer) after the final release before updating so I'd be happy with waiting until the official release.
  61. D

    Tiny Expression pedal!

    Linear if you hook it up with a TRS on the output and leave the input disconnected.
  62. D

    BUG: Moving Columns Breaks Multi Block Connections

    Not sure if it's a feature or a bug but I encounter this same issue frequently so I know exactly what you are talking about. In my case, I usually run into when I'm trying to fit a looper at the end of the chain. Doesn't matter if you use the column move feature or drag the block. It's hard...
  63. D

    Which strap locks?

    I've had the Dunlops on one guitar for years. With the Dunlops, you'd not only have to accidentally hit the button but at the same time something would have to be pulling the opposite direction with little to no angle to it. If you bump the button, almost always that same bump is going to be...
  64. D

    AX8 with acoustic guitars.

    I recommend playing around with some of the patches out there that do soundscapes that sound like a synth or string section. They sound amazing when mixed tastefully with the piezo.
  65. D

    Tiny Expression pedal!

    Mine just arrived! Haven't had a chance to plug it in and play yet but here's a quick size comparison next to my Mission EP-1 and Moog EP3.
  66. D

    AX8 with acoustic guitars.

    I'd think the FX8 might be worth considering? Basically you'd be saving yourself $300 by skipping the amp modelling. Not familiar enough with the FX8 to know if there are any downsides or additional upsides to it.
  67. D

    Which strap locks?

    DiMarzio Cliplock. Funny timing that I just noticed this thread as I just bought a pile of Cliplocks last week to finally replace all the non-Cliplocks straps & locks on my guitars with them. I started using a Cliplock strap years ago when I was a teenager just starting out and saw Vai using...
  68. D

    About to buy...audio gap question?

    I don't understand why every time the topic of the gap comes up someone makes this claim. If you have a tube amp that is not vastly faster and less noticeable on switching channels than the AX8 is on switching amp models then your amp is broken. Simple as that. If the gap on the AX8 isn't an...
  69. D

    About to buy...audio gap question?

    Nice of you to be respectful of other people's opinions. It doesn't bother you personally so I guess it's just an "overblown" thing that people complain about just to complain about. :rolleyes:
  70. D

    Tiny Expression pedal!

    That's awesome. I keep an expression knob on my board for random usage where I want easy access to a parameter but don't need full expression pedal control. This seems like a great compromise between the two that won't take much more space but be a little more convenient than having to bend...
  71. D

    Looper FX Decay

    I just did the following and it worked: Row 1) Amp -> Cab -> Split to Row 2 -> Volume -> Out Row 2) Split from Row 1 -> Volume -> Looper -> Delay, etc. -> Out First I set the Bypass Mode on the Volumes to Mute. That is key. Then I set Scene 1 to enable the Row 1 volume and disable the Row 2...
  72. D

    Mission Vs MOOG Expression

    I have both on my board. I went with the spring loaded Mission that returns to the 0 position automatically and I use that combined with the AX8's ability to automatically toggle a block off based on that. Works great for wah. If it wasn't for that feature, I'd be happy with all Moogs. Not...
  73. D

    Wish 2 compressors, one preset

    I haven't updated to 7.x yet but my understanding is that the amp block doesn't support the optical compressor?
  74. D

    Noob looper question with levels!

    Actually, I just realized that my scene setup is probably way more complicated than it has to be. You could just use the two scenes to switch in a lead boost pre-looper like with any other lead boost without messing with the row split, the bypass mutes, etc.. Just make sure you have the looper...
  75. D

    Noob looper question with levels!

    If you wanted to switch between presets for this, I think the same basic idea would work but be a little simpler. You could just stick the looper in its own row in the lead preset going direct to output (making sure that the loopers in both presets have the same settings or the AX8 will stop...
  76. D

    Noob looper question with levels!

    I bet you could do this by being creative with multiple rows and scenes. Here's an example that might work... Row 1) input -> amp, etc. -> split to row 2 -> volume block -> looper -> output Row 2) split from row 1 -> volume block -> output Set the volume blocks to mute input when bypassed...
  77. D

    Cross patch looper use

    Unless I'm misunderstanding the conversation this is false. The looper works between presets assuming you have you have the looper present in each of the presets and with the same settings. You'd most likely also want the looper to be at the end of the chain in all of the presets since the...
  78. D

    Ax8 volume output

    I've never used that feature but after playing around with it, it appears you are correct. I guess it is boosting before the DAC and then cutting equivalently after. I'm not sure why that would be a useful feature. I thought it let you tweak the output level so that the loop would be more...
  79. D

    Ax8 volume output

    It's under I/O in the same place as input padding if I'm remembering correctly. The manual has some info on it. I'm referring to the noise floor of the line level output. This is not related to the noise of the guitar or the stage noise. As an experiment, if you set the OUT 1 level extremely...
  80. D

    Anyone running the AX8 with a tube amp?

    I've done this going direct into the FX return on a Mesa head usually into a Rectifier 2x12 cab (but I've done 1x12 combos and 4x12 cabs too). Sounds absolutely amazing. The obvious downside is that you are locked into the sound of the real world power amp and cab rather than having access to...
  81. D

    Ax8 volume output

    I haven't seen anything official on it but I suspect the OUT 1 knob works like typical output level adjustments i.e. it is an attenuation knob. OUT 2 specifically has a boost setting to let you tweak it to whatever you put in the FX loop so that to me implies the OUT 1 doesn't boost. That...
  82. D

    USB audio interface expansion module

    As far as I know, there is no latency difference between USB 1.1 and 2.0. There is a bandwidth difference but that would not be an issue with a single stereo guitar signal.
  83. D

    USB audio interface expansion module

    It wouldn't be "any audio interface" because you'd want to preserve the digital pathway and because the original poster specified "small and integrated well". There aren't a ton of audio interfaces out there that support both S/PDIF and come in a pedalboard friendly size so definitely not "any...
  84. D

    F-Switch Toggle Scene 1&2

    Confirmed that it doesn't light for me so it appears to be a bug. The S1/S2 lights will toggle and if assigned to one of the non-F 1-8 switches, they'll toggle on/off but the F-switches do not.
  85. D

    Extra footswitches?

    Those are dual switches so you'd need a TRS from the pedal then split out to two TS plugs to plug into two of the external switch jacks on the AX8. The AX8 doesn't support two switches connected to one jack. The major question would be whether or not the AX8 supports two external switches...
  86. D

    AxeLive for AX8 and Axe FX II Now Available!

    Just a note for Windows users, your mileage my vary but I have the UD-BT01 and my experience is that it does NOT work with the AX8 under Windows for AxView (or AX8-Edit or FracPad). BT MIDI support in Windows requires that developers use the new Windows 10 MIDI API and I suspect these apps are...
  87. D

    Why use Null Filter instead of volume block?

    The volume block's level parameter can go up to +20dB. Why would you ever have two expression pedals assigned to two different volume blocks? The only scenario I can imagine you'd do that is if the 2nd pedal was being used as a boost which means you'd be using the 2nd volume block as a boost...
  88. D

    Why use Null Filter instead of volume block?

    Well, it's called a "filter" block so presumably no, that's not what that block was intended for particularly when a perfectly good extra volume block is available. The null type is presumably intended to convert the filter block into use as a simple level adjuster but you could also use a...
  89. D

    Why use Null Filter instead of volume block?

    I'm not following your logic as there are two volume blocks on the AX8. You can have one assigned to an expression pedal and then use the other for fixed changes to volume. This leaves the filter blocks available for their intended purpose rather than as impromptu volume adjusters.
  90. D

    Killer AX8 tone on this video

    I'm surprised no one has asked the most important question. How do you get the green knob lights on the AX8 to do the little light show?! :) Awesome playing and great preset. Very inspiring.
  91. D

    How do you mute everything?

    Since my prior comment about adjusting input padding was controversial, I'll amend my statement to make my fundamental point clearer. The title of this post is asking about muting "everything". The tuner mute doesn't mute "everything" because it disengages as soon as you enter Setup for any...
  92. D

    How do you mute everything?

    I switch between guitars with very hot, modern pickups and guitars with very low output, vintage pickups and find it necessary to pull the padding down on the low output guitars. Maybe it's all in my head (after all, I am a guitarist) but I have to imagine that the lower settings have some...
  93. D

    How do you mute everything?

    The downside of the tuner mute is that it is automatically disengaged when you enter Setup to adjust the input pad for the new guitar.
  94. D

    Wish Assign Scene 1/2 Toggle to External Switch

    Ok, after playing around with it for a little while it turns out the scene 1/8 toggle workaround really doesn't work that great due to the AX8 seeing the external pedal as still toggled to scene 8 when switching presets (yet setting the new preset to scene 1 but not 8) and thus requiring a...
  95. D

    Wish Assign Scene 1/2 Toggle to External Switch

    Makes sense but when I assign an expression pedal, I don't get any scene changes. Oh well. Just as long as it works, I'm good.
  96. D

    Wish Assign Scene 1/2 Toggle to External Switch

    What I don't understand is why Scene Select would toggle between these values? In the absence of a CC, I'd expect it to maybe default to some value like 0 resulting in Scene 1 always being selected. I wouldn't expect it to toggle between 1 and 8.
  97. D

    Wish Assign Scene 1/2 Toggle to External Switch

    Wow, Enzo, I tried it and it works like you said. That seems weird, almost like a bug, but, hey, it's a good workaround! I guess my wish should now be "either implement a proper Scene 1/2 toggle or don't fix the Scene Select bug!" :)
  98. D

    Reverb

    You might find the global Reverb Mix setting useful. This lets you globally pull back the mix level of the reverb so you can easily tweak it for a specific venue without having to dig into your presets. There's a similar Effects Mix setting that lets you do the same for a bundle of effects of...
  99. D

    Wish Assign Scene 1/2 Toggle to External Switch

    Unless I'm overlooking it in the list, Scene 1/2 Toggle cannot be assigned to an external switch. It can be assigned to one of the built in 1-8 for F switches but not external. It would be immensely useful to be able to assign this to an external switch for the convenience of having a separate...
  100. D

    Anything like the Mission SP-1 but with jacks on the back?

    Yup, thought of that, too. :) I'm just trying to see if something already exists before exploring those other directions.
Back
Top Bottom