Search results for query: *

  1. J

    Mixcraft DAW +FM3

    Hi all, Just wondering if anyone uses Mixcraft as a DAW. I’ve heard of the problem with using the FM3 as an interface to record audio over USB, but when I select ASIO as a driver it doesn’t let me set a buffer for latency. Any ideas? Just don’t want to do a bunch of tracks and then find out...
  2. J

    Using the looper for acoustic to adjust levels

    Got it. I knew that. 🤦‍♂️🤷🏻‍♂️🙂
  3. J

    Using the looper for acoustic to adjust levels

    Actually, setting everything up at my house right now is gonna take quite a bit of time. Thought I’d see what people think before I dig everything out. Long story. The reason to use shunts is so the signal goes from input 1 to output 1. Am I missing something?
  4. J

    Using the looper for acoustic to adjust levels

    I tried to use the fm3 for acoustic duo shows and just felt like I was fighting it. I’m sure it’s my presets, but I’m trying to use as little gear as possible. Don’t get me wrong, I absolutely love my FM3.
  5. J

    Using the looper for acoustic to adjust levels

    Hi all, This might be an actual, legit dumb question. 🤪 I’m trying to set up the mixer on my EV evolve 50m system. Mostly, trying to get a good acoustic tone by going straight into the mixer with no pedals/fm3 being used. I’m wondering if I made a patch with just shunts and a looper, how much...
  6. J

    Frfr availability

    I use an EV ZLX-12BT and I love them. I also picked up a bunch for band monitors. I think most places still have them in stock…🤷🏻‍♂️
  7. J

    FM3 gigbag or case?

    Can you show a pic of the FM3 fitting in the case?
  8. J

    Fm3 for acoustic shows

    FM3, not the FX3. 🤦‍♂️
  9. J

    Fm3 for acoustic shows

    I’m using a Yamaha A3M into the FX3. It has a piezo and a mic with a blend knob.
  10. J

    Fm3 for acoustic shows

    Still struggling with getting a good acoustic tone. Any more advice or presets you can share?
  11. J

    FM3 Firmware Version 5.03

    Just reinstalled and my issue seems to be gone.
  12. J

    FM3 Firmware Version 5.03

    Not yet. That will be my next move.
  13. J

    FM3 Firmware Version 5.03

    Pretty sure it’s cycling to random scenes, too. The lights on my switches also go crazy…
  14. J

    FM3 Firmware Version 5.03

    Win 11, no DAW, just practicing for a show. No FC. My usb cable is fine. And, if you unplug it when it starts going crazy, it doesn’t stop. Cycles thru random presets between my 389 and the blank ones up to 445 where it usually lands on.
  15. J

    FM3 Firmware Version 5.03

    Just installed the new update. Now, my FM3 will randomly just start cycling thru presets on its own. Seems to happen when connected to FM3 edit, but disconnecting while it’s going crazy doesn’t stop it. It will usually settle on preset 445 (blank) and I have to scroll back to 389, which is my...
  16. J

    Fm3 for acoustic shows

    Thanks, all. Appreciate the input.
  17. J

    Fm3 for acoustic shows

    Just wondering what people use to make acoustic presets on the FM3. I searched the forum, but didn’t see much info. I saw Cooper Carter’s vid, but I’m curious what other options people use. Thanks!
  18. J

    Wireless connection options for android/windows

    So, you use FM3 edit wirelessly then?
  19. J

    Possible dumb question: headphones in mono?

    Thanks for the reply. So, copy LR will affect the headphones? I was setting up delays and realized how easy it was to set up a great stereo sound and then have to play live in mono. Just trying to streamline the limited time I have to work on setting up presets…
  20. J

    Possible dumb question: headphones in mono?

    Hi all, Wondering if there’s a way to make my headphones do mono. I’m using them to set up some presets and don’t want to accidentally set up stereo effects for mono live use later on.
  21. J

    Crobot/Chris Bishop effects

    Cool, thanks for the help! Also, really appreciate your tutorial vids. I’m a huge fan of your channel. It’s seriously taught me all kinds of tricks since I’ve become a fractal user. 🙂
  22. J

    Crobot/Chris Bishop effects

    Haha, I’m gonna take the silence as a no. 🤪 Here’s a link if anyone is interested. I meant to post it with the first post, but messed it up.
  23. J

    Crobot/Chris Bishop effects

    Hello! Does anyone know how to create the effects that Crobot is famous for? I’m talking about those spacey, oscillator type sounds they are know for. Just curious if anyone had tried this.
  24. J

    USB drivers will not install!

    I’m having the same issue. I have an older laptop that still connects, but my newer desktop won’t install the drivers. Thinking it’s a windows update issue and the drivers are outdated. Your guess is as good as mine...
  25. J

    Error while installing Axe-Fx II drivers

    Glad you got yours working, but kinda bummed that this means I have a different issue that I can’t seem to figure out. My unit works on laptop, won’t read on a desktop that I just installed the drivers on.
  26. J

    Error while installing Axe-Fx II drivers

    Also, not a desktop issue. USB interface and mixer work just fine.
  27. J

    Error while installing Axe-Fx II drivers

    Mine is definitely not the problem. Works fine on the laptop I’ve used for 5 years, but not the desktop my DAW is on. Definitely not an issue with my unit. I just haven’t had time to mess with it lately and since my laptop still works, I never messaged support. Personally, I think a windows...
  28. J

    Error while installing Axe-Fx II drivers

    Just wanted to chime in and say I’m having the EXACT same problem.
  29. J

    Performing a total reset

    Thanks guys! Appreciate the help. :)
  30. J

    Performing a total reset

    Hi all, I’m sure this has been asked before, and I’m probably annoying a bunch of you but I’m not seeing this in the forum. I have an Axe II and I’d like to do a total reset and update the firmware to Ares 2.0 and get the newest batch of presets to build from. I know how to update the firmware...
  31. J

    Starting over

    Haha, yes! Thank you! Will fractal bot automatically overwrite the factory presets?
  32. J

    Starting over

    Hi all, I have an axe fx 2. I had a back injury and had to take quite a bit of time off from music, now I'm finally starting back up. I was wondering what the easiest way to start over is. I'm on fw 5.xx, and would like to update not only the firmware, but the amps, cabs, presets, ect...I...
  33. J

    Using USB to record with Mixcraft

    Hello, I'm using the USB for audio and I wanted to record a Di signal for reamping, but when I select the axe FX 2 as a device it only shows 2 channels instead of 4. I'm sure this has been answered a million times, but I'm lost! :) Thanks!
  34. J

    Need some midi help

    Cc#17 is the number for the external 2. I will never press this IA switch. I just want it to light up when I press the activation button on the expression pedal. The whole point is that I can tell when my wah is active when the light is green since my expression pedal has no light.
  35. J

    Need some midi help

    I've figured out that I use external 2 to control the switch on the sp1. So, I need to figure out a way to link IA 17 to cc#17...
  36. J

    Need some midi help

    Hi all, I have a Mfc 101 and a mission engineering sp1 pedal. My mission pedal has no LED light on it, which can be confusing to use. I'm trying to figure out a way to make one of the IA switches (17) to light up green when I turn on the expression pedal and go red when it's off. I am as...
  37. J

    Any ideas how to make this effect??

    Awesome, I'll give it a try. Thanks! :)
  38. J

    Any ideas how to make this effect??

    Hi all, I used to have boss gt pedals and they had a really cool effect where you could play a note, hit the button and it would hold that note in the background while you play. Really cool for feedback and ebow type sounds. Any idea how to do this without using the looper? Thanks!!
  39. J

    Updating firmware question

    Hello, I decided to update to the version 3.0 beta. I've heard something before that your presets don't update automatically with the firmware and you have to reset them, or something like that. What's the best way to do this? Thanks!
  40. J

    Amp & Cab Quick Reference Guide updated

    This guide is awesome. Just wanted to say thanks!! :)
  41. J

    Using Wah light in place of LED on Mission Engineering sp1

    Also, in the manual it says you can program a custom message to be displayed when an IA switch is turned on and off. Anyone know if you can do this for the expression pedal switch?
  42. J

    Using Wah light in place of LED on Mission Engineering sp1

    I have the sp1 switch one set to wah control, and switch 2 set to wah bypass. I also have an IA set to wah 1, which I thought would automatically control the bypass and I wouldn't have to set it to a specific cc#.
  43. J

    Using Wah light in place of LED on Mission Engineering sp1

    Thanks for your help, but I'm still lost. I have my Wah 1 set to IA#11, but how do you change what the cc# is on it?
  44. J

    Using Wah light in place of LED on Mission Engineering sp1

    Thanks for the reply. Now, can you tell me how to do that? :P I'm really new at this setup, and not sure how to figure out what cc number I need to use...
  45. J

    Shutting off the tempo light

    Hello, I was wondering if there is a way to kill off the constantly blinking tempo light on the mark 2 and the mfc...
  46. J

    Using Wah light in place of LED on Mission Engineering sp1

    Hey all, New guy here. I have a Mark 2 with a Mark 3 MFC pedal and a Mission Engineering SP1. My expression pedal doesn't have the LED light to let me know whether its active or not. Is there a way to make the Wah Switch on the MFC light up when I step on the expression pedal to turn it on...
Back
Top Bottom