Search results for query: *

  1. B

    Got my FX8 Mk 1, hooked up but massive noise

    Yes sir. I find it easier to seek the problem without constraint (live considerations, in this instance) and then apply the constraints once the problem is understood.. I find it's easier that way.
  2. B

    Got my FX8 Mk 1, hooked up but massive noise

    I went from pedals to the FX8, and my rig got a lot quieter.. If it's adding noise in any way, perhaps contact support and see if they have any ideas. Do try what the other gentleman suggested, even if it won't work live, it may point to a power related problem, and troubleshooting can be...
  3. B

    Got my FX8 Mk 1, hooked up but massive noise

    Yes, there is +4 db and -10db. You should not need to use the noise gates to get no noise. I have a ISP Decimator G-String in the loop, to catch pre-amp noise, but I only need it for the most extreme settings. I can live without it. It's silent without gates in every other scenario.
  4. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    No, there's a button on the back of the unit specifically for ground lifting.
  5. B

    Got my FX8 Mk 1, hooked up but massive noise

    That's not expected. I have a mark 1 and it is silent in all my amps. Check fx loop gain settings compared to your amp, that could be something.. but this unit is so quiet it's not even funny. My amps for ref: Mesa Boogie Mark IV, Dual Recto.
  6. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    What is your cable configuration in detail?
  7. B

    FX8 is in da' house :)

    True, but some scenes are good for jamming. I often have a 'jam' song preset.. clean, dirty, etc.. plus some standard stomps to fill in the blanks.. However I always 100% use scenes to switch amp channels, due to the avoidance of a using a block, and other benefits such as triggering of fx.
  8. B

    FX8 is in da' house :)

    I have also found that to be true. Even for after market parts, I got assistance late on a Friday night from an employee and he located me parts not even on the website in under an hour at a really fair price. I didn't expect to hear anything until Monday, and it was already packed before the...
  9. B

    FX8 is in da' house :)

    You should use scenes. Scenes allow you to set relays in either tip, sleeve, or both configs. It allows you to avoid using a block for that functionality. I have a Mesa Mark IV and I can use 4 functions of the amp in any combination i want. Also works great for my dual rec. Scenes are key :)
  10. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    My issues were purely gain based. With too much output vol, the fryette squeals like a pig. There are impedance changes when new output sources are jacked in (I had line out plugged in), so sometimes levels need to be dropped a bit to avoid the squeal. That's what I found.
  11. B

    FX8 MK I vs MK II noise level?

    The mark 1 is so damn quiet, i doubt it gets MUCH better.
  12. B

    FX-8 / Mesa Mark IV Switching Questions

    I also run a Mark IV with the existing 4 relays no problem.. I think it's one of the best all around amps ever made. I considered an amp gizmo to do the whole works, but like the other poster here, I found I was fine with the 4 available relays no problem.
  13. B

    FX8 Relay Switching issue with Friedman

    That's the issue. When X/Y is on, the change happens on button release. Disable X/Y and it will change instantly. You can still use XY, by assigning an F switch to XY switch. a reasonable compromise IMO.
  14. B

    Help - new user - need to get started

    I'd start with reading the manual. Grab FX8-Edit. It will make editing easier and more intuitive. Have a listen to other people's presets, and try and learn from them. There are a number of good Youtube videos on patch creation. They are linked here in the forums, have a look around...
  15. B

    Wish Ability to Name Scene Blocks

    No, not currently. It's a work in progress.
  16. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    I'm gonna work on this over the weekend. I've got 4 heads, with different loops. Mesa Dual Rect, Mesa Mark IV, Ibanez 120 watt tube head and a mesa rectifier recording preamp. I'll run them through with the fx8 in the loop and try and replicate the conditions. Note, I DID experience the issue...
  17. B

    Rukus - what the heck is wrong with this drive pedal?

    There will always be improvements. It's such a night and day difference, forgive my exuberance.
  18. B

    Wish Ability to Name Scene Blocks

    By building something.
  19. B

    Wish Ability to Name Scene Blocks

    I've got that problem solved.
  20. B

    Rukus - what the heck is wrong with this drive pedal?

    All the drives are finally great. FX8 is now a full solution.
  21. B

    FX8 V3.60 Released

    Just curious what the problem with the scene approach is? It works for your scenario, it can be configured to work exactly like what you have in mind.
  22. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    Info like that is where this sort of issue always lie. All details are important, even the mundane.
  23. B

    FX8 and Fryette Power Station Problems and Conversation with Steven Fryette

    I have a Fryette power station and have heard this harmonic noise personally. Mesa Mark IV into an original Powerstation. I got busy with life and didn't follow up with this. Good luck in the quest, I will appreciate hearing the result!
  24. B

    ISP or other Noise Gate?

    I have an ISP Decimator II g-string in the loop. guitar tracking ensures the gate stays open as long as it should. i don't believe that it gates the input signal of the guitar at all, or when switching to clean channel. it's a set and forget system. I had a non-g-string version and it was...
  25. B

    How to get instantaneous switching

    You can setup a function key as an XY switcher, tap, or sticky. This is what I have setup, as I prefer the instant switch.. The only lag switching I've heard involved the multi-delay. Without it I get seamless relay and effect switching.
  26. B

    Wish Double-tap Function 1 and Function 2 footswitches

    Ya perhaps you are right. There are lots folks using the tech in lots of different ways. I guess if you are ok with the delay, this could be useful.
  27. B

    Wish Sample and Hold/Glitch block

    This is a great idea. +1
  28. B

    Wish Double-tap Function 1 and Function 2 footswitches

    Double tap would cause a delay in all switching, as the system would have to wait til it was sure there were not two clicks before executing a change. This would make the entire experience sluggish. Consider external midi switches as a viable solution for your needs.
  29. B

    FX8 mounting to a pedaltrain board

    I cut a piece of thin masonite, then put screw holes for each screw on the bottom of the unit, which ensures the screws were at the same depth as with the feet installed. I put the velcro on the bottom, ua which is very secure with no slipage, I put serious crazy glue as well to ensure that...
  30. B

    FX8 with Mark II JP MIDI

    Using scenes effectively will easily allow the control of this amp.
  31. B

    No Sound - Please help

    Wise move. I've actually found decent purchased cables, and they were not the most expensive ones available :) I prefer making them as well to ensure quality, and to have the correct length.
  32. B

    FX8 U2 presets exchange

    There was talk of exchange of patches being built into FX8Edit... not sure if that's still a go... you could see about converting Axe FX presets to blocks using the utility in the AX8 forum.. never tried it but it may get you there.
  33. B

    No Sound - Please help

    one of the main reasons I got an FX8 was cable issues :)
  34. B

    Scenes versus pre set mode for live use -which do you prefer

    I noticed in quite a bit. You must tap those switches pretty quickly. My foot must be slower than yours :) I imagine better technique yields better results.
  35. B

    Scenes versus pre set mode for live use -which do you prefer

    I have X/Y turned off. You can always setup the X/Y selector as a function switch. That's what I do, and I rarely use it. Scenes takes care of the switching between X/Y for me no problem.
  36. B

    Scenes versus pre set mode for live use -which do you prefer

    I have zero gap changing scenes. it's really really seamless on my Mesa Mark IV. If you have gaps, it's likely you amp delaying on the change. Do you use MIDI or relays? I use relays.
  37. B

    Wish MUCH BIGGER Patch/Scene Name on diplay!

    Sure would be nice if it did have one.
  38. B

    How to use Relay1 and Relay2 in auto-trigger with 3 scenes?

    Good point to recognize, this is an important step too!
  39. B

    Fx8 freeze

    Contact support. I've put in about 20 hours or more in the last 3 days just hammering the cpu with crazy wild complex patches with controllers everywhere, without any freeze-ups, half on 3.0, half on 3.01. See what support says about your issue.
  40. B

    Some cool UI changes coming to the AX8...

    I'd guess "Soon".
  41. B

    4 scene and 4 stomp

    There is a S1/S2 toggle.. that may meet your needs.
  42. B

    How to use Relay1 and Relay2 in auto-trigger with 3 scenes?

    Yes, no problem. Go into FX8 edit, then go to the Config tab. There choose relay 1, and relay 2, and encode how you want each relay set for each scene. It works like a champ, I use all 4 relays like this all the time perfectly.
  43. B

    update

    Via Fractalbot. Just receive the entire system data from the FX8, then go ahead with the update. Enjoy, it's an excellent update.
  44. B

    Some cool UI changes coming to the AX8...

    Hey, that's our update. No peeking :)
  45. B

    Wish auto pause option in fx8-edit

    Some people get super offended by the "read the manual" replies... but it appears the advice is still quite valid in most cases :)
  46. B

    FX8 V3.01 Firmware Release

    You spend enough time programming, Even after reading the release notes, I still learn something from this video. Thanks Chris, your summary was very useful and helpful.
  47. B

    Using the FX8 with 2 Amps

    It sure does. I also find Chris's videos that explain the firmware updates very useful. Even after reading the release notes, I still learn something from the videos.
  48. B

    "Crushed Bits" help

    This might be what you want.
  49. B

    mission expession pedal

    You will likely need both expression inputs to accomplish this.
  50. B

    Mesa JP-2C with an FX8

    Now all you need is someone with both the amp, and the FX8. That wait will likely be longer :) Anyhow, it'll work. I use mine will various Mesa products, including Mark series, which is what this is essentially(the JP-2C).
  51. B

    Mesa JP-2C with an FX8

    Likely no-one owns that amp yet. It just came out. I can tell you this, FX8 works great with Mark IV, Mark V, and should have no problem with JP-2C. You likely won't have anyone on here that can verify with your exact amp, but I'd wager it's a safe bet. If it has relays or MIDI, it should...
  52. B

    "Crushed Bits" help

    Except time and frustration. I am pretty sure it won't work. That being said, I've misread your post. I don't have an AX8, so help is still required.
  53. B

    "Crushed Bits" help

    That works for the FX8? Not that I can see.
  54. B

    Recording

    USB is only midi I think
  55. B

    Beat Buddy MIDI sync to AX8 looper anyone

    Oooh.. it's quite nice actually in terms of features. Thanks for the heads up on this firmware update for the Beat Buddy! You can use the FX8 to set the tempo using CC messages (using 2 controllers to go from 40-300bpm), then run the FX8 slaving off the clock in the beatbuddy and other midi...
  56. B

    Beat Buddy MIDI sync to AX8 looper anyone

    I will give it a go. I have to order the midi cable, but since it now has clock, it just might become useful to me.
  57. B

    Wish chording of footswitches

    Those are called Scenes and already built into the system.
  58. B

    ISP DECIMATOR G-STRING II HELP

    Just hook it up the way bread suggested, and if you want to experiment from there, go for it. His approach is the best approach. Good luck.
  59. B

    ISP DECIMATOR G-STRING II HELP

    Exactly how mine works. It works perfectly with the FX8.
  60. B

    FracTool - for power users only

    Any chance you could do a block ripper for FX8 users? Just skip unsupported blocks and strip all the fx blocks and dump them in a folder. That would be super handy!
  61. B

    FX8 and Budda SuperDrive amp

    Check with your amp manufacturer. Are the relays Short to Sleeve? Then it's compatible.
  62. B

    Using FX8 With The Fryette Power Station

    From what cable? I'll jack my gear into the Fryette loop when I get home, rather than my Mesa loop. I'd love to see that email...
  63. B

    MIDI issues: Fractal latency & issues?

    Ya, that was kinda the questions I was asking. Which chip specifically. I have access to midi chips.
  64. B

    MIDI issues: Fractal latency & issues?

    What midi chip are you looking for?
  65. B

    Using FX8 With The Fryette Power Station

    OK! So, with attenuation, and speaker mismatch to a 4x12 cab, with the line out plugged in, huge feedback. when removed, no problem at all! Perhaps you have a line out running in your rig? Try removing it to see if the squeal goes away.
  66. B

    best expression for Fx8

    I have both a Fractal EV-1 and Mission EP-1 spring loaded. I love the spring loaded for auto-engage fx, and I love the EV-1 for all sorts of other applications that require the pedal to maintain it's position.
  67. B

    Using FX8 With The Fryette Power Station

    I will actually try this myself and see if i can figure it out.
  68. B

    FX8 after 10 days of ownership

    As in, focusing on modifiers and controlling things like mix levels, feedback control of delays, speed changes in phasers.. Basically using modifiers to make your effects stand out better, usually using expression pedals, etc. I have some great feedback swells that I used to do by bending down...
  69. B

    Tone loss

    Interesting ! I wasn't aware of that, perhaps that helps explain my experience.
  70. B

    Tone loss

    I'd love to hear the recorded difference. This is very interesting for me, perhaps I am actually missing something.. Not sure, I'd love to learn more..
  71. B

    Tone loss

    I get ZERO tone suck in my Mark IV loop. Completely transparent, same as true bypass. I also don't get any suck in my Mesa Rectifier Preamp.
  72. B

    Which Amp with FX8

    I'd bet most amps work will with the FX8. Just make sure it has either midi that works... There are posts on here about amps with issues. If no midi, ensure that there are short to sleeve relays (if you need channel switching), and a loop (if you desire that). Should be good with that as a...
  73. B

    MB MARK V 90w GUYS

    That's a good point too. Bad tubes can be bad :) I recently redid my Mark IV with all Mullard Blackburns that I came into possession of, and GE NOS power tubes, I don't get much issue out of these.. :) The difference in tone my amp now creates is night and day better than new production tubes...
  74. B

    MB MARK V 90w GUYS

    Hmm.. i guess that's true! Is that common? I guess it would be in the power amp stage, noisy power, gotcha. Makes sense.
  75. B

    Another Wait list question

    The flexibility awakening was the moment I realized that no pedals can compete with the control I now have. Life has never been simpler, or more customized to my needs.
  76. B

    MB MARK V 90w GUYS

    An ISP Decimator 2 will work perfectly as a tracking gate that doesn't affect cutoff. It's a hack solution, but it will work.
  77. B

    Talk me into the FX8 =)

    Pretty much sums it up. I wouldn;'t change either. i had the entire eventide series, all gone, except the space I use to augment the fx8, if I have too much patch CPU usage I can use the Eventide Space, and it does a couple unique things, but I could live without it easily. The unit is as far...
  78. B

    Looper

    Would be cool though :)
  79. B

    FX8 after 10 days of ownership

    I had the exact same experience. I have not bought a pedal since I got the FX8. Now you can focus on effect dynamics, and unlock entirely new possibilities, you have a lot of fun ahead good luck!!.
  80. B

    FX-8 midi help

    I had my fx8 scene switching no problem via MIDI. To test of it's your midi controller, hook up usb, and use a daw CC to control some values, make sure the unit is changing. If so, it's likely you controller, good luck.
  81. B

    Using Relay to change channels on Mesa Express 5/50 Plus

    You will love it.
  82. B

    Standalone Audio Interface

    I find the Roland octa/quad/duo capture are better than the Focusrite. Excellent drivers, amazing direct mixer, really a great card.
  83. B

    Wish Add FX8 to Axe Change Please ?

    This is the smartest idea IMO. Good job!
  84. B

    Using Relay to change channels on Mesa Express 5/50 Plus

    If your relays are like mine, they are mono relays (Mark IV, Rectifier Pre). To get the most out of the FX8, I run 2 TRS Y insert cables, which gives you 4 relay controls via the 2 stereo relay outputs.
  85. B

    MB MARK V 90w GUYS

    I have a mark iv 90w. I run slave out to a fryette power station, then into my stereo cab, when i feel like running stereo. When I don't the fryette is a silent recording solution and transparent attenuator. It's a really useful piece of kit, not too expensive. 50W 6L6.
  86. B

    FX8 and programmable preamp

    No worries. I don't get too worked up about internet posts. I'll do my best to not be impatient with folks, I do like this forum, and I like the members of it.
  87. B

    FX8 and programmable preamp

    Just The internet doesn't have a tone button, I didn't mean any disrespect. I was trying to say read the manual without saying read the manual. I'm just sick of saying read the manual. I was trying to be nice actually. It's a nice forum full of helpful people here, and mostly people go out...
  88. B

    Guide: Re-Amping with external sound card/audio interface

    Cool fair enough, makes sense! Thanks for your answer.
  89. B

    Guide: Re-Amping with external sound card/audio interface

    You guys sure do have some complex re-amping solutions here! Have you considered the simple approach? http://www.radialeng.com/prormp.php I use a reamp box with great success into my physical amp. Works perfectly. I'm sure it would work into the Axe 2 without need to sync via digital, etc...
  90. B

    Wish More controls for the Bit Crusher

    The int Generally, the internet does a horrible job coveying tone, and often people get defensive and feel offended by the perceived tone of a post. Happens all the time. Best to try not to take it personally when the comment is ambiguous.
  91. B

    Distortion question

    This is good advice!
  92. B

    FX8 and programmable preamp

    Midi is fast and easy for program changes. You barely have to learn anything. Understanding your gear is part of the responsibility of using it. You have excellent useful gear, you will get a lot more out of it all understanding how it works.
  93. B

    Fx8 freeze

    Start by following the directions in the update. Then contact support if fails. I don't know why people don't follow instructions.
  94. B

    FX8 and programmable preamp

    Very nice. pretty sure the midi control will be sufficient for your needs no problem.
  95. B

    FX8 and programmable preamp

    You could use midi. you could use relays. It really depends on your target hardware. you want to run 4cm likely. I recommend you start with the manual. You will learn a lot about your options.
  96. B

    Quantum 2.0 coming to the AX8 in 3... 2... soon?

    They are different target processors, but likely share similar attributes/architecture. You have to compile for a target platform, including all hardware included in that platform. That may be less/more of any given component. The code will be similar, and based on the same previous work, but...
  97. B

    Wish Metronome Tweaks

    Soundbrenner Pulse is what you need. Get rid of that pesky metronome sound forever. (Not affiliated, though I do have one).
  98. B

    FX8 into a clean platform like a Fender amp

    You can. I was going through the presets last night into my Mesa Rectifier Preamp (which has excellent clean channel) and the drives caught me off guard at how good some of them sounded. I've had an FX8 for months now, and I am finally getting to the drives lol :)
  99. B

    Implemented Synth Block

    No worries! This is what a forum is for :) Reasonable constructive help and ideas to solve a problem.
  100. B

    Fx8 edit connection problem

    Excellent! Glad you sorted it out, too bad new pc was required, but I bet in the long run it will all work out :)
Back
Top Bottom