Search results for query: *

  1. Meat Head

    Can I do this with my FM9?

    Ok, I went to the Quad Diatonic Delay and used a sequencer for the harmony controller on each of the four voices. I set the first 4 at 100, next at 80 and so forth as suggested. I have an Input2 block into an amp block set to Tube Pre. The input is a sure SM57. I put a Digital Mono Delay block...
  2. Meat Head

    Can I do this with my FM9?

    Awesome suggestions. Thanks very much! I see I have a lot of work to do to get this working.
  3. Meat Head

    Can I do this with my FM9?

    Hey all! I'm trying to create a patch for "Fame" by David Bowie. The guitar part is great, no problem. What I would like to be able to do though, is run a mic into Input 2 and run the vox through the ARP for that epic two octave, "fame fame fame fame fame fame fame" walk down. I'm having a...
  4. Meat Head

    Need Preset w/Synth Drone

    Not sure if you found what you were after by now but I have a preset on my FM3 for Pat Benatar's Promises in the Dark. I tried to emulate the synth pads in the intro. However, it doesn't track what I'm playing, I change the pad chord manually using scene changes. It may be possible to use a...
  5. Meat Head

    Waitlist Email

    Waitlist Confirmation 08/29/21 12:39 AM Invitation received 8/30/22 3:28 PM EST Ordered!
  6. Meat Head

    Waitlist Email

    Waitlist confirmation 8/29/21 12:39 AM. I should be working but I just keep refreshing my email and toggling between "focused" "other" and junk with Carly Simon singing "Anticipation" in the back of my head...
  7. Meat Head

    Waitlist Email

    Hahaha Pure semantics Greg. One's as bad as the other if you just went all in on yesterday's model.
  8. Meat Head

    Waitlist Email

    The waiting and uncertainty about how much longer it might be is almost enough to drive me to the III. I had the II and loved it, but since having the FM3 I've fallen in love with being able to tote my entire rig in a Pedaltrain case. The other nagging thought is that by the time I'm able to get...
  9. Meat Head

    Wish FM9 Wishlist

    Seemed like they were also hoping to find more efficiencies in the algorithms. I'll be keeping my fingers crossed in either case...
  10. Meat Head

    Wish FM9 Wishlist

    While I'm waiting for my name to pop up on the wait list and making wishes for the FM9, I might as well add AxeIII FW17 support so the FM9 can use ultra res cabs and is Amp in the Room capable... I hope they can find a way to make that work. 🤞
  11. Meat Head

    Wish FM9 Wishlist

    I don't know, but it sure looks like he's trying to look into the wrong end of those binoculars...
  12. Meat Head

    Wish FM9 Wishlist

    Thanks. If Fractal's long history shows anything, it shows they understand that if you wanna be the Mac Daddy, then you have to go out and BE the Mac Daddy. This is just another improvement to keep them squarely planted in the top dog position.
  13. Meat Head

    Wish FM9 Wishlist

    I think a screen mode would be cool. The standard screen mode is great for editing, tweaking, etc. It gives a ton of data and options, though at the cost of small type. Pop her into Performance View Mode and you get less blood and guts info about minute parameters and large type Patch Number and...
  14. Meat Head

    Wish FM9 Wishlist

    Thankfully, I'm pretty certain the folks at Fractal aren't as thin-skinned as you. It's just a request for them to look at an aspect of their product that, clearly, a lot of other people also find to be an issue. This helps them improve their product and hopefully to get even more market share...
  15. Meat Head

    Wish FM9 Wishlist

    If they don't do something I will have to get my hands on an old over-head projector and cut the lens to fit the LCD screen. That could work... Maybe they're just leaving the door open for me to make an after-market product....
  16. Meat Head

    Wish FM9 Wishlist

    I don't see a wishlist yet but I can see one thing right away that will be a problem for me. Coming from the FM3 with an FC 6, my eyes are always drawn to the screen of the FC6 at a gig when I want to see what patch I'm on, due to the larger type and ease of finding it without having to squint...
  17. Meat Head

    Waitlist Email

    Email confirmation 8/29 12:36 AM. I'm just glad to see it has a headphone jack... ;)
  18. Meat Head

    Global boost?

    No answer for this? I was hoping to do the same thing. I have an external switch just waiting for the assignment...
  19. Meat Head

    FracTool help

    Ich verstehe nur Bahnhof... Thanks All.
  20. Meat Head

    FracTool help

    Haha! You nailed it! Thanks. Bypassed the cab block and We Got Sound!
  21. Meat Head

    FracTool help

    Ok Thanks. The delete key works even though there is no feedback on the screen showing that the cable has been selected. I got the in and out blocks added. Still no sound. All blocks are connected. I removed the parallel loop. I've been searching posts and YouTube for troubleshooting guides...
  22. Meat Head

    FracTool help

    How did you delete the cable? I can't click on it or get it to highlight. Is there something in the menu?
  23. Meat Head

    FracTool help

    Here's one... The other is what I got when I converted with Fractool. Along with a screen shot of what it looks like when I load it into the FM3 with FMEdit. I've tried a bunch of presets and all my inputs are running off the screen like that.
  24. Meat Head

    FracTool help

    Also, I am unable to drag Axe II presets onto the FM3 in Fractool. The only option I can choose is to use the conversion tool. I'm not sure if that's part of the problem.
  25. Meat Head

    FracTool help

    I can add the in and out blocks but can't figure out how to manipulate the first input cable. Every patch converted by fractool has the input cable running off the top left of the screen. How do you get it back in line? Patches between other blocks are easy. The first one I can't address...
  26. Meat Head

    FM3 Now Shipping

    Waitlist Date: 02/27/2020 Invite Received: 10/08/2020 Ordered!!! Yeah Baby! Go FAS!
  27. Meat Head

    FM3 Now Shipping

    YeaUh!!! C'mon 2/27! Thanks for the update.
  28. Meat Head

    FM3 Now Shipping

    There's a wait for those as well.
  29. Meat Head

    FM3 Now Shipping

    All you have to do is check the Axe III wait list thread to surmise what's going on. They've switched production to filling Axe III orders from July. Doesn't seem like FIFO service but I guess they want to move the flagship.
  30. Meat Head

    FM3 Now Shipping

    My guess would be they decided to switch production line focus to the Axe III Mk2 for now.
  31. Meat Head

    FM3 Now Shipping

    The last day of summer is next Monday. We'll see how close they can get to clearing the queue per the earlier related rumors. It doesn't look like they'll be able to hit that mark at this point.
  32. Meat Head

    FM3 Now Shipping

    Ooops I'm the blind one... I thought he was referring to a different post. My browser was slow to d/l the screen shot he posted...
  33. Meat Head

    FM3 Now Shipping

    Read his post Sid. He didn't say he received an invite, he said he was hoping for one soon...
  34. Meat Head

    FM3 Now Shipping

    Agreed - Waitlist 02/27/2020 but still no invite... Soon though, very soon... 🤞
  35. Meat Head

    Anyone wish they had bought the FC-12 instead of the 6?

    Sure looks like Christmas time. Where did you find the skins, the shields and who makes the external switches you are using? I know Mission makes some duals like that, but those don't seem to be Mission... "Edit" Enlarged the pic and tried a search on Mosky. Found them. Still curious about...
  36. Meat Head

    Anyone wish they had bought the FC-12 instead of the 6?

    Great input. Thanks to all! I hadn't thought about the option of adding additional buttons, or an additional FC6. Two 6s wouldn't save space or money but would definitely add layout flexibility.
  37. Meat Head

    Anyone wish they had bought the FC-12 instead of the 6?

    I'm trying to decide before my number gets called on the FM3 wait list. I'm migrating from the Axe II XL+ with an MFC101. Even with the MFC101 I had to dual function some of the buttons. I was planning on trying the FC6 since the FM3 + FC12 will not fit my current 32 inch Pedaltrain board. (Any...
  38. Meat Head

    FM3 Now Shipping

    Wooot Woot. Gratz Vans! Looks like Fractal has topped the crest of the hill and is picking up some downhill momentum.
  39. Meat Head

    FM3 Now Shipping

    I don't think it will end up being linear. My bet is the number of people that were signing up on the list decreased pretty drastically after August 2019 and that this will result in a continued reduction in wait times. I gotta believe it. I didn't sign up until 02/27/2020. Gimme something to...
  40. Meat Head

    FM3 Now Shipping

    I have a dream that in the future There Will BE NO Waiting List!!!! 🤘
  41. Meat Head

    FM3 Now Shipping

    Hopefully they'll send out the last non-HP version soon so it's not a thing anymore... Either most people are passing on them or they have a huge supply.
  42. Meat Head

    Post Here if You've Received An FM3 Invite!

    Yeah, but I didn't get on the list until 2/27/2020... o_O
  43. Meat Head

    Post Here if You've Received An FM3 Invite!

    Anyone else received an invite since Mid May? I'm hoping to see some acceleration in the fulfillment rate. At this point a scalper's unit on ebay is starting to look better than waiting another six months...
  44. Meat Head

    MFC 101 III Advancing Presets on its own

    Hi All, I've had my new Axe II XL+ less than a week and am loving the tone. However I'm experiencing a weird glitch with the MFC. In any given bank I use, if I select preset 1 the #1 light stays lit until I take my foot off the switch and then the preset automatically advances to the next...
Back
Top Bottom