Search results for query: *

  1. L

    Axe-Fx II "Ares" Rev 2.00 Firmware Release

    Wow; The Master Of Sourcecode Improvement ... Congrats, Cliff! 👍:cool:👍 You're killer man! So even the AxeFx II will go on ... That, once more, makes the difference to other companies. Thanx a lot for that! Regards, Mike
  2. L

    Axe-Edit

    Ah OK; You didn't mention that fact before, so I thought you're using the II. Sorry for that. Regards Mike
  3. L

    Axe-Edit

    I'm using Axe-Edit 3.14.5 actually on macOS Sierra. System informations (Apple-Button > About This Mac) and the Activity Monitor both show me the information, that this Axe-Edit version is accounted as a 64-bit app. So it should run on macOS systems, which only support 64-bit apps.
  4. L

    Bug? Globak blocks do not unlink in axe edit

    Hi Davy; There is an Axe-Edit section here named: Axe-Edit (Gen I, II only) It makes sense to post bugs and other problems of the editor in that section ;-) Also it is helpful to tell us, which firmware and editor versions you are using! Regards, Mike
  5. L

    Axe-Edit 3.14.5

    @Michael Pickens Hi Mike; The Ten-Tap-Delay bug when changing Delay Time with the taper in the editor is still there! ARES 1.03 & Edit 3.14.5. Changing the values manually by editing the edit-field works well. Oh, I forgot ... macOS Sierra system! Kind regards, Mike
  6. L

    Axe Edit v 3.14.4 has bug in "Axe-Manage Presets" tool

    Hey guys; that has been reported a lot of times! I think Michael Pickens has seen all these posts ;-) Using the functions on the Axe itself works well.
  7. L

    Bug? Moving presets in Axe-Manage Presets kills the presets

    I even wrote that yesterday. I tried to COPY! That even doesn‘t work. Good to see, that I didn‘t try to move presets ... Doing it at the Axe itself, there is no problem. It‘s an editors bug.
  8. L

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    Yes! Axe-Edit/Dynamics tab I've just checked it again. Turnin' the taper or setting the value by hand in the edit-field and saving the preset doesn't produce any problem. The Axe is working well all the time.
  9. L

    Bug? 10 Tap Delay

    ;-) Exactly; my fault. Must have been a problem with my eyes ... Ignored the MultiDelay ... Same problem here. The digits (values) are staying still there in the edit-field, but the taper is going back to zero/left side. Thanx Mike
  10. L

    Bug? 10 Tap Delay

    Sorry to ask you; Are you using a XL/XL+ or a II? I cannot find any 10-Tap-Delay on the AxeFx II MK II, ARES 1.02, AxeEdit 3.14.4. There's a Multi-Tap. But everything works fine. Regards Mike
  11. L

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    Not on the AxeFx II MK II ! Neither using the editor, nor doing it on the Axe itself.
  12. L

    Bug? Export/Import preset

    I can confirm that. File has 6 KB but cannot be importetd.
  13. L

    Axe-Edit 3.14.4

    Just tried to copy a preset from one position to another. The Axe-Presetmanager shows the name of the preset at the new presetnumber after saving it. But if I close the manager, the copied preset isn't there ;-) Copying on the AxeFx itself works! It's an editors problem. ARES 1.02 / AxeEdit...
  14. L

    Tools/Axe-Manage Presets - copying presets doesn't work

    Just tried to copy a preset from one position to another. The Axe-Presetmanager shows the name of the preset at the new presetnumber after saving it. But if I close the manager, the copied preset isn't there ;-) Copying on the AxeFx itself works! It's an editors problem. Moving presets with the...
  15. L

    Fixed Axe-Fx II CF Hardness

    Cannot confirm that. ARES 1.02 / AxeEdit 3.14.4 / AxeFx II MK II
  16. L

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    That sounds great! Thanks for the commitment! I'm very curious about the (new) improvements. Is it possible to update the editor regarding the new parameter? Would be nice ;-) Rock'nRoll
  17. L

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Yes; you‘re right. As edo said, over a long time. I‘m not sure, but I seem to recall, that this parameter had been deactivatet a long time ago. Nevertheless it had been there in the AxeFx-menu. That‘s what I remember; but I even can be wrong.
  18. L

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Yes! There is one parameter missing in the editor: "Speaker Compliance". So it would be nice to get an update ;-) Nevertheless; "Ares One" is a big shot in my opinion! Great last gift for us Axe-Fx II-users. @FractalAudio Many thanks to Cliff and the whole crew!!! Has been a great journey...
  19. L

    Blues impro with the JTM45 on Ares 1.0

    Hi Toni, ich bin's Mike! Bin ja seit Kurzem nicht mehr auf axefx.de vertreten; haste vielleicht mitbekommen. War mir zu sehr unter der Gürtellinie, die letzte Geschichte. Habe gerade Deine Aufnahme auf axefx.de gehört ;-) Klasse mein Lieber! Das hört sich aber mal sowas von schön an! Der Sound...
  20. L

    AF2 Ares amp block gain?

    It‘s a BETA! To change all your presets at now doesn‘t make sense! Change the presets, if the final version has been rolled out! That would make sense ;-) wouldn‘t it?
  21. L

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    I think it would be helpful, to post that in the "Axe-Fx II Bugs"-section, because it is possible, that Cliff doesn't read any posting here ;-)
  22. L

    AxeEdit 3 will be updated?

    If there are new parameters in Ares 1.0, it will be necessary to roll out an update. But the update will come, when the final firmware-version has been rolled out, I think.
  23. L

    Why are FAS-Cabs/Cab-Packs only allowed to be used in the AxeFx?

    I've bought them, I payed for them ... I wouldn't spread them to other users as a kind of pirate copy ... But I think, it should be my own decision to use them the way I like to do! Am I thinking in the wrong direction? I'm refering to this thread: #5
  24. L

    Level vs. Master Vol.

    The "Input Trim-Parameter" is programmed (modeled) as a part of the real hardware in a real amp! So its value affects the behaviour of the first gain stage of an amp. Even it is a part of the (software)modeling process. It doesn't only change the input amplitude, like the...
  25. L

    Using VU meter in Axe Fx II - Cleans vs Crunch/Lead - Issues......

    I'm even using this kind of leveling. And it works good. But mostly I use FreeOrbanLoudnessMeter. When it is configured in the right way, it does it the same way as the internal VU-meter. With one big difference; It shows even the peak level for a second or more ... That helps a lot ;-) If you...
  26. L

    Easiest way to compare 2 presets?

    I'm using the app "Beyond Compare" to compare two files. Export the 2 (files to be compared) *.csv-files from the Axe-Edit. Using drag&drop you can put the exported files into the two app-windows (left, right). It makes it very easy to compare, if you choose the option "only show differences" in...
  27. L

    Ringing with even slight gain?

    Have you checked the following parameters: AxeFx itself... Global / Config / Power Amp Modeling = ON ... Cabinet Modeling = ON ? Maybe, that one of these parameters have been set to OFF! Just an idea ... It also may help to reset the system parameters. Even a reinstalling of the firmware...
  28. L

    FracTool - for power users only

    Thank you for reply! Greets.
  29. L

    FracTool - for power users only

    Hi Al; Is it possible to convert Axe-III-presets into II? It tried, but FracTool crashed when I drag'n'dropped the III-preset onto the Tool-form. Would be great to check presets, which have been created with the III. Thanx, Mike
  30. L

    Axe-Fx II "Quantum" Rev 10.01 Firmware Release

    Yes guys; it is and has been always the same problem; Not the firmware by itself is the problem; It's the coordination between MIDI-Over-USB (AxeFx) and the other running (MIDI-using) processes on the computers. Last days, my Axe ran for hours without any problem. I only avoided to use any...
  31. L

    Problem with the edit

    Hi Roberto; Same question here; Do you try to use the AxeFx II-Editor with the AxeFX ULTRA? That doesn't work! Try this link to AlGrenadine's ftp-site: http://archive.axefx.fr/AxeFX%20I%20%28Standard%20%26%20Ultra%29/AxeEdit/ Load: Axe-Edit_Setup 1_0_191 That was the last stable version and...
  32. L

    Axe-Edit constant crashing

    I can commit, that the AxeEdit-crashes are back in 9.04! On macOS Sierra, last version. Yesterday evening, I had them 4 times. Every time in a different context; Clicking the Save-Button, moving a block from one place to another, changing parameters and so on... Over a longer time of firmware...
  33. L

    What Happens To My Presets When I Update Firmware?

    Hi; A factory reset isn't necessary. As Severed said, it's a complete new installing (into the Boot-ROM) of the firmware you want to use. The firmware itself doesn't change while using the AxeFx. The parameters which can be changed (systems parameter, user cabs, presets ...) are stored in...
  34. L

    What Happens To My Presets When I Update Firmware?

    The "full backup" saves the components, you can see in the list of the Fractal-Bot receive-tab. The firmware cannot be saved by backup!
  35. L

    Is 9.04 The Last Firmware For The Axe-Fx II?

    ;-) Killer man!!! That makes the difference ... I think, next year I'll get the III.
  36. L

    Headphone Sound Disappointing. User Error?

    Read his first post! He's mainly talking about the sound/volume of the headphone out! It's impossible, that you/I have an identical sound when playing thru headphones and/or playing thru power amp and a real cab. So my answer is: No
  37. L

    Headphone Sound Disappointing. User Error?

    I'm using the AxeFx II MKII with an AKG K601. 120 Ohm impedance. More than enough power, if I tweak presets in a normal (volume)range. No problems here.
  38. L

    Axe-Fx II "Quantum" Rev 9.04 Firmware Release

    Oh my god ... :fearscream::screamcat::weary: What can we do? Where is BATMAN? :eyes:
  39. L

    Axe-Fx II "Quantum" Rev 9.04 Firmware Release

    I don't come to the thread in the FIRST place ;-) But if I come to it, I would like to read some things about the main theme. Even not every posting is boring; only the ones with text like "When do we get the next firmw..." :) But it's not a big thing; Till now, I can handle it. BTW, when do we...
  40. L

    Axe-Fx II "Quantum" Rev 9.04 Firmware Release

    It's boring, because every time a new firmware has been rolled out, people started to ask "When do we get the next update?"! If you have read Cliffs posting, you know, that actually all ressources are focussed on the AxeIII. The time will come, that we will get a new firmware for the II-series...
  41. L

    Axe-Fx II "Quantum" Rev 9.04 Firmware Release

    It's boring man! Updates come, whenever updates come, whenever upda......
  42. L

    Is it me or is the Axe fx 3 aesthetically unpleasing?

    No no no no no no no no no no n............... ad infinitum The display is very fine! I love blue LEDs, blue Screens (Oh sorry! Has been a bad joke for all Windows users :tearsofjoy:) and the design of the new display and the whole device. It's so sad, that a lot of Fractal users are living in...
  43. L

    Axe FX II XL+ support

    ;-) That are magnificent news! And it makes the difference in companies ... Thanks for such a long support in updates (for the Mark II)! Kind regards from europe! By the way; the Axe-Fx III looks great, with great specs! So the time will come, ... ;-) Mike
  44. L

    FracTool - for power users only

    Hi; Try to configure your antivirus app in a way, that it will ask you, whether to delete a found "infected" file or not. A good antivirus app gives you the option, to decide, what it has to do ;-) Regards Mike
  45. L

    A Gift from Fractal Audio! Free Cab Pack!

    That's very kind ;-) Thanx Matt and also FAS for the give aways, the good jobs and all the improvements of the AxeFx! Since 2009 I'm a Fractal-User. And this tool has become my ultimate fun-tool ;-) And it will be that for the next 100 years <|;-)))) (I hope to stay on earth over such a long...
  46. L

    FracTool - for power users only

    Sorry, but I think you missunderstood my posts. There is no criticism or chest pounding!!! It's a normal thing, if I don't share every point of his arguments, so I think. I only tried to make proposals that could make the app a bit more better. Nothing else ... and a constructive process! But...
  47. L

    FracTool - for power users only

    Maybe. Maybe, I will do it to get my personal resetter. But a day has only 24 hours. ;-) I'm IT-worker and software developer, programming neuronal networks and such things, and psychological consultant and coach. And I'm musician. And my girlfriend likes to share some time with me ... vice...
  48. L

    FracTool - for power users only

    - Yes select all/deselect all/save/load are on the todo list Fine; Even "Save" and "Load". - Saving the preset is mandatory because the tool is aimed to handle numerous presets at once, so not saving would have no sense... In case of changing more than one preset, you're right. In case of...
  49. L

    FracTool - for power users only

    Hi Al; Mike here. I've tested the very helpful new Amp Resetter. Thanks again; It makes testing a lot easier, especially after firmware updates. As a developer too, there are for now two or three ideas, to make the GUI and the function more user-friendly. At first it would be very helpful, to...
  50. L

    FracTool - for power users only

    Great man! That has been an option of AxeLive. Now I have all that stuff in FracTool That's cool ...
  51. L

    Need Firmware: Quantum 8.01 for AxeFx II Mark I

    That's customer service! ;-)
  52. L

    Show Available Devices

    The "Show available devices"-dialog. But I've just seen, that you used an older version of edit. So everything's OK now with the updated version ;-)
  53. L

    Show Available Devices

    It does work on my iMac. macOS Sierra 10.12.5 AxeFx II MKII via USB Quantum 9.00 Release Axe-Edit 3.14.3 Scanning and pinging are not a problem. I have to say, that only one AxeFx is connected to the Mac. But that shouldn't make a difference, so I think. Regards Mike
  54. L

    USB "adapter on" bug ?

    :) Bear with him ... Nobody's perfect ...
  55. L

    WISH: Command Z Undo/Re-do

    +1
  56. L

    Communication timeout problem with Q.8

    That are good news! Thanks to you and your team! FAS rocks! Kind regards Mike
  57. L

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    Hi Cliff; That's funny. You have been a bit faster than me. Two persons, same thoughts. Kindly regards Mike
  58. L

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    Ok; Q=2*Pi*(W/V) W is the stored energy at start of an oscillation period. V is the lost energy within this period. Q is the amount of damping of a resonant circuit, to be correct Bandwidth=f0/Q f0=squareroot(f1*f2) f1 is the lower, f2 the upper frequency, where the amplitude is -3dB below...
  59. L

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    If your TC does it this way, it doesn't mean "Q" (= Quality). The Q-factor, describing filter-qualities, isn't a physical value. It's a relative scaling, most of the time like [0..1]. Q=0 means the lowest quality value; the filter has a wide range (bandwith). Q=1 means the highest (best)...
  60. L

    Time-out between Axe-Edit and AxeFx with fw 8.02

    Right ;-) But I wanted to show the screenshot and describe the other sideeffects (with other apps). Nevertheless, thanks for info!
  61. L

    Time-out between Axe-Edit and AxeFx with fw 8.02

    Since AxeFx-firmware 8.02, I even have a lot of time-outs between my iMac with macOS Sierra 10.12.5 and the Axe-Edit (3.14.2). Connected is the Mac via USB-cable. But not only Axe-Edit is affected. Yesterday, I had the same problem with Orban Loudness Meter, a software I use to handle the...
  62. L

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    As said many times; The new Celestion cabs are NOT in the UltraRes Samples directory of the FIRMWARE-ZIP-FILE AND NOT in the factory cabs of the AxeFx II ! They are commercial cabs, only allowed to be used here IN THE AXEFX. So they have been implemented in the FACTORY CABS to be prevented of...
  63. L

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    Back to topic? ;-)
  64. L

    Axe-Edit 3.14.2 Released

    Fine ;-) Thank You, Mike!
  65. L

    Axe Edit constant crashes

    For macOS, there is still version 1.67 on the run. For Windows version 06.06.2014. So this are the last drivers. Maybe, it's an option to reinstall the driver. But it doesn't make sense, because i.e. my macOS hasn't got any change, since the last firmware- and Axe-Edit versions have been...
  66. L

    Axe FX II timing out after 8.0

    That's not correct. From time to time (firmware & software versions), I've even got timeout messages from the Axe-Edit. I never had a MFC; It had been a problem only between AxeFx and my Mac computer. Most of the time, the following (software/firmware)releases had fixed it. The AxeFx is (and...
  67. L

    Axe Edit constant crashes

    Maybe, it's a firmware problem. Restarting Axe-Edit and/or disconnecting & reconnecting the USB-cable doesn't fix the problem. Only restarting the AxeFx itself helps to reconnect with Axe-Edit. I also have seen, that working with the Output-block/scene-volume page in Axe-Edit produced the...
  68. L

    When will the updates stop?

    I also hope, that it never ends! You're not forced to install updates. Improvement is the right way ... Improvement causes changes in sound and funcionality. No improvement means, to move backwards in development at a certain point. That's not, what we want, I think.
  69. L

    Axe-Fx II "Quantum" Rev 7.02 Firmware Release

    Be cool guys; They'll do their best! Didn't they in the past?
  70. L

    Axe-Fx II "Quantum" Rev 7.01 Firmware Release

    A differing perspective isn't generally silly! I respect different kinds of opinions all the time! Especially this discussion is needless in my opinion. Nothing more ;-) It's OK, if someone is unhappy, not to have the option to switch back. But I would prefer more Boot-ROM-storage instead of...
  71. L

    Axe-Fx II "Quantum" Rev 7.01 Firmware Release

    I can't believe, what I'm reading here. Same discussion as we have had a few months ago. In my opinion, there is no need to switch back to older modeling versions. The options, to get a perfect sound, are bigger than ever with this firmware 7.xx. For what other reason should FAS improve the...
  72. L

    Axe-Edit 3.13.0 Released

    Commit! Great job again! Even great new features! And just in time after the firmware update ;-) Cool Mike! Mike
  73. L

    Axe-Fx II "Quantum" Rev 7.00 Public Beta #2

    Great stuff guy! Manfred Mann's Earthband would be delighted at it ;-) Solar Fire and all the other records are georgeous music.
  74. L

    Axe-Fx II "Quantum" Rev 7.00 Public Beta #2

    Not a good idea I think! The way, FAS does it, has been a good decision.
  75. L

    Bug? Q7 beta 2 mixer block gets scrambled values when saving preset

    Yes it should, so even I think. It should not be possible, to store a preset, that doesn't fit the maximum preset size, the AxeFx can handle. Those kind of faults should be handled early enough by the software. That's daily routine in software development.
  76. L

    Axe-Fx II "Quantum" Rev 7.00 Public Beta

    Slow down Cliff ;-) Rome was not built in a day! Actually we have one of the best betas ever built. It's a version to play triumphant gigs ;-) We're patient and the AxeFx rocks! Kind regards from Europe! Mike aka Crazy Frog
  77. L

    Axe-Fx II "Quantum" Rev 7.00 Public Beta

    Sooooooon ;-) Always the same answer ... Things must be ripe for publishing! Less bugs and early publishing are reciprocal to each other! It's tricky, I know ... Mike
  78. L

    Axe-Fx II "Quantum" Rev 7.00 Public Beta

    Maybe ghost-notes ... Quite normal for some amps. Try to use the +B parameter to change this behavior a bit. ... if you don't like ghost-notes ;-) Just an option, 'cause I don't know, how it sounds, when you play. Mike
  79. L

    Axe-Edit 3.12.2 Released

    I think, there is no more to say than: http://forum.fractalaudio.com/threads/axe-fx-ii-quantum-rev-6-03-firmware-released.122901/page-8#post-1463146
  80. L

    Axe-Fx II "Quantum" Rev 6.03 Firmware Released

    The actual best setting is - firmware Q 6.03.1 (or Q 6.02, but it makes no difference except of the new features) - edit 3.12.0 It works for me and it complies to what Michael Pickens did say. We have to wait, until Axe-Edit 3.12.3 is out!!!!!!!!
  81. L

    Axe-Edit 3.12.2 Released

    The actual best setting is - firmware Q 6.03.1 (or Q 6.02, but it makes no difference except of the new features) - edit 3.12.0 It works for me and it complies to what Michael Pickens did say. We have to wait, until Axe-Edit 3.12.3 is out!!!!!!!!
  82. L

    Axe-Edit 3.12.2 Released

    That's correct, if you can configure it to work equivalent with the Axe-VU. I like Orban, 'cause it's a small app, easy to configure and I don't need a DAW. In Ardour, which I use, I would have to change the VU-parameters/configuration to force the DAW-VU to show me the same values as the...
  83. L

    Axe-Edit 3.12.2 Released

    Confirm. Very good solution. I use it for more than a year. You can configure it to work exactly like the VU-meter in the AxeFx. Fortunately, they have updated the app. So it's compatible even with macOS Sierra ;-)
  84. L

    Extra blocks being added to signal chain I didn't put there!! ???

    Oh my god! HAL 9000 is back ... :fearscream::fearscream::fearscream::fearscream::fearscream:
  85. L

    Axe-Edit 3.12.2 Released

    Spot on! Great support, fruitful cooperation with us users! That makes the difference to a lot of other companies! And ... We all make mistakes! So FAS! That's part of the human beeing! So let us be indulgent ;-)
  86. L

    Axe-Edit 3.12.2 Released

    Yes! I would appreciate this option too! It's annoying, to go back to the VU-page, everytime after changing a scene. Would be great, to change this behavior, Michael ;-) Regards Mike
  87. L

    Axe-Fx II "Quantum" Rev 6.03 Firmware Released

    Hey guys; Cool down!!! Michael P. does his best, to improve the program! Things like "you fail me" are not the correct way, to handle this problem. He doesn't such things to annoy you! Mike
  88. L

    Need answer about firmware size for Mark I/II users

    :D Merry Xmas to all from the Crazy Frog! We shouldn't discuss such things while Xmas! All things will find their way, and FAS will find solutions, to make ALL users happy :blush: Mike
  89. L

    New FAS Video w. Larry Mitchell + Free Presets!

    Thank you Larry! That's very kind. This year doesn't end very happy. Nevertheless; Have a great Xmas time and a happy new year! Peace to all of you! Kindly regards Mike
  90. L

    FracTool - for power users only

    Hi Al, your tool ist getting better and better. And it's very helpful over time. That's fine ;-) Wish you happy XMas days! Kindly regards, Mike
  91. L

    Owners Manual

    That sounds good ;-) Happy XMas to you all! Mike
  92. L

    Axe-Edit 3.12.0 Released

    Hi Mike; That has been a brilliant idea !!! ;-) Thanks for that great Christmas Special ;-) Oh man :-) Please forget the rest of my post!!! I just read your OP again to be on the safe side ... So I saw the last part of the Important Note ... You can call me a blind man ;-)))) But I have a...
  93. L

    Axe-Edit 3.11.0 Released

    Looks very good and handy ;-) Particularly item 1 an 3! Very useful improvements! The editor is getting better and better ... Really good job, Mike! Thanks again.
  94. L

    Axe-Edit 3.11.0 Released

    Thankx Michael! It seems, there are some good new features in the editor ;-) Especially the Scenes-page will make my life a little bit easier ;-) Axe4Ever and kindly regards Mike
  95. L

    Axe-Fx II "Quantum" Rev 6.01 Firmware Released

    Thanx a lot Cliff! MK II User ;-) Regards Mike
  96. L

    csv-preset export function; too much line feeds

    @Michael Pickens Hi Michael; In the file, generated by the csv-preset export-function of the editor, I found 3 line feeds, which shouldn't be there, as I think. In the picture below, generated with FileMerge from the XCode/MacOS, you can see the tagged parameters, affected by the fault: Preamp...
  97. L

    Axe-Fx II "Quantum" Rev 6.00 Firmware Released

    That's, what I'm loving FAS for! And that's one of many reasons, to use the AxeFx instead of other companies gear! Improving things and finding solutions; that's the way they walk ... A big Thank You to Cliff and the whole FAS-team!!! FAS is an exceptional company! Nothing compares to the...
  98. L

    Axe-Fx II "Quantum" Rev 6.00 Firmware Released

    Lieben sollste doch eigentlich nur Frauen, oder nich :D Gruß Mike
  99. L

    Remove Legacy Version Option from Firmware - Mark l/Mark ll

    +1 I even don't need the option to use older modeling versions. I think, it has been the wrong decision, to implement this function! Why? At the end of the day, we all want to use a well improved guitar modeler. So it has to be latest ... With the switch-back option, all the time someone has...
  100. L

    Axe-Fx II "Quantum" Rev 5.02 Firmware Released

    That would be bad, but solvable. Could, for instance, happen, when there is no process within the code, to check, if the actual modeling version of a just loaded preset is set to Latest or not (if Force Default Version is set to On). Or the routine doesn't work properly. I trust in FAS ;-)...
Back
Top Bottom